diff options
Diffstat (limited to 'libjpegtwrp/jddctmgr.c')
| -rw-r--r-- | libjpegtwrp/jddctmgr.c | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/libjpegtwrp/jddctmgr.c b/libjpegtwrp/jddctmgr.c new file mode 100644 index 000000000..674bfa75f --- /dev/null +++ b/libjpegtwrp/jddctmgr.c @@ -0,0 +1,335 @@ +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef ANDROID_ARMV6_IDCT + #undef ANDROID_ARMV6_IDCT + #ifdef __arm__ + #include <machine/cpu-features.h> + #if __ARM_ARCH__ >= 6 + #define ANDROID_ARMV6_IDCT + #else + #warning "ANDROID_ARMV6_IDCT is disabled" + #endif + #endif +#endif + +#ifdef ANDROID_ARMV6_IDCT + +/* Intentionally declare the prototype with arguments of primitive types instead + * of type-defined ones. This will at least generate some warnings if jmorecfg.h + * is changed and becomes incompatible with the assembly code. + */ +extern void armv6_idct(short *coefs, int *quans, unsigned char **rows, int col); + +void jpeg_idct_armv6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + IFAST_MULT_TYPE *dct_table = (IFAST_MULT_TYPE *)compptr->dct_table; + armv6_idct(coef_block, dct_table, output_buf, output_col); +} + +#endif + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch (compptr->DCT_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case 1: + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 2: + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 4: + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; +#endif + case DCTSIZE: + switch (cinfo->dct_method) { +#ifdef ANDROID_ARMV6_IDCT + case JDCT_ISLOW: + case JDCT_IFAST: + method_ptr = jpeg_idct_armv6; + method = JDCT_IFAST; + break; +#else /* ANDROID_ARMV6_IDCT */ +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: +#ifdef ANDROID_JPEG_USE_VENUM + /* Use VeNum implementation of jpeg_idct_islow even if fast DCT option is selected */ + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; +#else + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; +#endif /* ANDROID_JPEG_USE_VENUM */ + break; +#endif +#endif /* ANDROID_ARMV6_IDCT */ +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#ifdef ANDROID_ARMV6_IDCT + /* Precomputed values scaled up by 15 bits. */ + static const unsigned short scales[DCTSIZE2] = { + 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041, + 45451, 63042, 59384, 53444, 45451, 35710, 24598, 12540, + 42813, 59384, 55938, 50343, 42813, 33638, 23170, 11812, + 38531, 53444, 50343, 45308, 38531, 30274, 20853, 10631, + 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041, + 25746, 35710, 33638, 30274, 25746, 20228, 13933, 7103, + 17734, 24598, 23170, 20853, 17734, 13933, 9598, 4893, + 9041, 12540, 11812, 10631, 9041, 7103, 4893, 2494, + }; + /* Inverse map of [7, 5, 1, 3, 0, 2, 4, 6]. */ + static const char orders[DCTSIZE] = {4, 2, 5, 3, 6, 1, 7, 0}; + /* Reorder the columns after transposing. */ + for (i = 0; i < DCTSIZE2; ++i) { + int j = ((i & 7) << 3) + orders[i >> 3]; + ifmtbl[j] = (qtbl->quantval[i] * scales[i] + 2) >> 2; + } +#else /* ANDROID_ARMV6_IDCT */ + +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } +#endif /* ANDROID_ARMV6_IDCT */ + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col]); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} |