| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
| |
This class allows us to set the following locations dynamically:
cache_temp_source, last_command_file, stash_directory_base.
In the updater's main function, we reset the values of these variables
to their default locations in /cache; while we can set them to temp
files in unit tests or host simulation.
Test: unit tests pass
Change-Id: I528652650caa41373617ab055d41b1f1a4ec0f87
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the split mode of imgdiff, we used to assume that the size of a split
target chunk is always greater than the blocksize i.e. 4096. This may
lead to the following assertion failure:
I0221 04:57:33.451323 818464 common.py:205 imgdiff F 02-21 04:57:33 821203 821203 imgdiff.cpp:999]
Check failed: tgt_size >= BLOCK_SIZE (tgt_size=476, BLOCK_SIZE=4096)
This CL removes the assumption and handles the edge cases.
Test: generate and verify the incremental update for TFs in the bug; unit test passes
Bug: 73757557
Bug: 73711365
Change-Id: Iadbb4ee658995f5856cd488f3793980881a59620
|
| |
|
|
|
|
|
|
| |
It used to keep track of the stat(2) info (e.g. st_mode/st_gid/st_uid)
while patching a file in file-based OTA.
Test: Build and use the new updater to apply an update on bullhead.
Change-Id: Ibf8f0f4b14298a9489bf24a2678bb279c5d9c8f3
|
| |
|
|
|
|
|
|
| |
Also add a verbose option. And we won't print messages of 'info'
severity unless '-v' is present.
Test: run imgdiff and check the logs.
Change-Id: I1b90874baea8e72e2a2323a0b63bc5d35e653e6b
|
| |
|
|
|
|
|
| |
It used to be "const Value*", but nullptr won't be a valid input.
Test: recovery_host_test; recovery_component_test
Change-Id: I904b5689ac3e64504088bf0544c9fb5d45a52243
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We encountered segfaults in Imgdiff host tests due to the failure to
reset states of getopt. The problem can be solved by switching to use
bionic's gtest where a new process is forked for each test.
Also modify the recovery_component_test to make sure it runs in parallel.
Changes include:
1. Merge the writes to misc partition into one single test.
2. Change the hard coded location "/cache/saved.file" into a configurable
variable.
Bug: 67849209
Test: recovery tests pass
Change-Id: I165d313f32b83393fb7922c5078636ac40b50bc2
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
bsdiff interface is changing such that it hides the suffix array
pointer from the public interface. This allows to use a different
suffix array data size depending on the input size, running much faster
in the normal case.
Bug: 34220646
Test: `make checkbuild`; Ran an incremental update generation on a non-A/B device.
Change-Id: I78e766da56cf28bc7774b8c8e58527bc11d919fb
|
| |/
|
|
|
|
|
|
|
| |
Also drop the "bootable/recovery" path in LOCAL_C_INCLUDES from
applypatch modules.
Test: lunch aosp_{angler,bullhead,fugu,dragon,sailfish}-userdebug;
mmma bootable/recovery
Change-Id: Idd602a796894f971ee4f8fa3eafe36c42d9de986
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
And move '#include "edify/expr.h"' into .cpp files. This breaks the
transitive dependency on libedify. Modules that include
"applypatch/applypatch.h" don't need to add libedify into their
dependency list, unless they really need anything from libedify.
Build libedify static library for host, which is needed by
libimgpatch.
Test: mmma bootable/recovery
Change-Id: Ibb53d322579fcbf593438d058d9bcee240625941
|
| |
|
|
|
|
|
|
|
|
|
| |
Add a mandatory option in imgdiff to write the split info (i.e.
patch_size, tgt_size, src_ranges) to file when handling large apks.
Therefore, the caller of imgdiff can create split transfers based on
the info.
Bug: 63542719
Test: unit tests pass
Change-Id: I853d55d1f999fd576474faa81077f7307f4d856d
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to the cache size limit for OTA generation, we used to split large
zip files linearly into pieces and do bsdiff on them. As a result, i) we
lose the advantage of imgdiff; ii) if there's an accidental order change
of some huge files inside the zip, we'll create an insanely large patch.
This patch splits the src&tgt more smartly based on the zip entry_name.
If the entry_name is empty or no matching source is found for a target
chunk, we'll skip adding its source and later do a bsdiff against the
whole split source image (this rarely happens in our use cases except
for the metadata inside a ziparchive).
After the split, the target pieces are continuous and block aligned,
while the sources pieces are mutually exclusive. (Some of the source
blocks may not be used if there's no matching entry_name in the target.)
Then we will generate patches accordingly between each split image
pairs.
Afterwards, if we apply imgpatch to each pair of split source/target
images and add up the patched result, we can get back the original
target image.
For example:
Input: [src_image, tgt_image]
Split: [src-0,tgt-0; src-1,tgt-1, src-2,tgt-2]
Diff: [ patch-0; patch-1; patch-2]
Patch: [(src-0,patch-0)=tgt-0; (src-1,patch-1)=tgt-1;
(src-2,patch-2)=tgt-2;]
Append: [tgt-0 + tgt-1 + tgt-2 = tgt_image]
Peformance:
For the small package in b/34220646, we decrease the patch size of
chrome.apk dramatically from 30M to 400K due to the order change of
two big .so files.
On two versions of angler, I also observe decent patch size decrease.
For chrome.apk, we reduced the size from 5.9M to 3.2M; and for
vevlet.apk from 8.0M to 6.5M.
Bug: 34220646
Test: recovery component test && apply imgdiff & imgpatch on two
chrome.apk
Change-Id: I145d802984fa805efbbac9d01a2e64d82ef9728b
|
| |
|
|
|
|
|
|
|
| |
1. Move the declaration of the Image classes to the header file to make
testing easier.
2. Also move rangeset.h to bootable/recovery to allow access in imgdiff.
Test: recovery component test
Change-Id: I68a863e60a3f2e7ae46ee48f48eb15391f5f4330
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This will help us to identify the patch corruption.
Meanwhile fix a wrong size parameter passed to bspatch.
(patch->data.size() into patch->data.size() - patch_offset).
Also remove the only usage of "ApplyBSDiffPatchMem()" and inline its
Sink function for simplicity.
Bug: 37855643
Test: Prints SHA1 for corrupted patch in imgdiff_test.
Change-Id: Ibf2db8c08b0ded1409bb7c91a3547a6bf99c601d
|
| |
|
|
|
|
| |
Test: mmma bootable/recovery system/update_engine
Test: recovery_component_test
Change-Id: I93c2caa87bf94a53509bb37f98f2c02bcadb6f5c
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mostly for applypatch family APIs like ApplyBSDiffPatch() and
ApplyImagePatch(). Changing to size_t doesn't indicate they would
necessarily work with very large size_t (e.g. > ssize_t), just
similar to write(2). But otherwise accepting negative length doesn't
make much sense.
Also change the return type of SinkFn from ssize_t to size_t. Callers
tell a successful sink by comparing the number of written bytes against
the desired value. Negative return values like -1 are not needed. This
also makes it consistent with bsdiff::bspatch interface.
Test: recovery_component_test
Test: Apply an incremental with the new updater.
Change-Id: I7ff1615203a5c9854134f75d019e266f4ea6e714
|
| |
|
|
|
| |
Test: make
Change-Id: Ic77c4669574b6129e06aa6051804f419bcc8196c
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Factor out libimgdiff static library for testing purpose.
This CL adds the imgdiff tests on host and on target both (similar to
libimgpatch). In practice, we only need imgdiff binary on host, and
libimgpatch on target. But they should build and pass tests on both
platforms.
Test: recovery_host_test passes; recovery_component_test passes.
Change-Id: I0eafb7faf727cdf70066310e845af6ee245d4f60
|
| |
|
|
|
|
| |
Test: Unit tests and install-recovery.sh pass on angler and dragon.
Change-Id: I328e6554edca667cf850f5584ebf1ac211e3d4d1
|
| |
|
|
|
|
|
|
|
|
|
| |
Changing the field of 'Value' in edify to std::string from char*.
Meanwhile cleaning up the users of 'Value' and switching them to
cpp style.
Test: compontent tests passed.
Bug: 31713288
Change-Id: Iec5a7d601b1e4ca40935bf1c70d325dafecec235
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If two libraries both use LOCAL_WHOLE_STATIC_LIBRARIES and include a same
library, there would be linking errors when generating a shared library
(or executable) that depends on the two libraries both.
Also clean up Android.mk files.
Remove the "LOCAL_MODULE_TAGS := eng" line for the updater module. The
module will then default to "optional" which won't be built until needed.
Change-Id: I3ec227109b8aa744b7568e7f82f575aae3fe0e6f
|
|
|
update_engine need it for the new IMGDIFF operation.
Also removed __unused in ApplyImagePatch() as I got error building it
for the host, and I think it's dangerous not checking the size of the
input.
Test: mma
Bug: 26628339
Change-Id: I22d4cd55c2c3f87697d6afdf10e8106fef7d1a9c
|
