1 files changed, 0 insertions, 310 deletions

diff --git a/source/BlockArea.h b/source/BlockArea.h
deleted file mode 100644
index 075cc99ec..000000000
--- a/source/BlockArea.h
+++ /dev/null
@@ -1,310 +0,0 @@
-
-// BlockArea.h
-
-// Interfaces to the cBlockArea object representing an area of block data that can be queried from cWorld and then accessed again without further queries
-// The object also supports writing the blockdata back into cWorld, even into other coords
-
-// NOTE: All Nibble values (meta, blocklight, skylight) are stored one-nibble-per-byte for faster access / editting!
-
-
-
-
-
-#pragma once
-
-
-
-
-
-// fwd: World.h
-class cWorld;
-
-// fwd: FastNBT.h
-class cParsedNBT;
-
-
-
-
-
-// tolua_begin
-class cBlockArea
-{
-	// tolua_end
-	DISALLOW_COPY_AND_ASSIGN(cBlockArea);
-	// tolua_begin
-	
-public:
-
-	/// What data is to be queried (bit-mask)
-	enum
-	{
-		baTypes    = 1,
-		baMetas    = 2,
-		baLight    = 4,
-		baSkyLight = 8,
-	} ;
-	
-	enum eMergeStrategy
-	{
-		msOverwrite,
-		msFillAir,
-		msImprint,
-		msLake,
-	} ;
-	
-	cBlockArea(void);
-	~cBlockArea();
-	
-	/// Clears the data stored to reclaim memory
-	void Clear(void);
-	
-	/** Creates a new area of the specified size and contents. 
-	Origin is set to all zeroes. 
-	BlockTypes are set to air, block metas to zero, blocklights to zero and skylights to full light.
-	*/
-	void Create(int a_SizeX, int a_SizeY, int a_SizeZ, int a_DataTypes = baTypes | baMetas);
-	
-	/// Resets the origin. No other changes are made, contents are untouched.
-	void SetOrigin(int a_OriginX, int a_OriginY, int a_OriginZ);
-	
-	/// Reads an area of blocks specified. Returns true if successful. All coords are inclusive.
-	bool Read(cWorld * a_World, int a_MinBlockX, int a_MaxBlockX, int a_MinBlockY, int a_MaxBlockY, int a_MinBlockZ, int a_MaxBlockZ, int a_DataTypes = baTypes | baMetas);
-	
-	// TODO: Write() is not too good an interface: if it fails, there's no way to repeat only for the parts that didn't write
-	// A better way may be to return a list of cBlockAreas for each part that didn't succeed writing, so that the caller may try again
-	
-	/// Writes the area back into cWorld at the coords specified. Returns true if successful in all chunks, false if only partially / not at all
-	bool Write(cWorld * a_World, int a_MinBlockX, int a_MinBlockY, int a_MinBlockZ, int a_DataTypes = baTypes | baMetas);
-	
-	/// Copies this object's contents into the specified BlockArea.
-	void CopyTo(cBlockArea & a_Into) const;
-	
-	/// Copies the contents from the specified BlockArea into this object.
-	void CopyFrom(const cBlockArea & a_From);
-	
-	/// For testing purposes only, dumps the area into a file.
-	void DumpToRawFile(const AString & a_FileName);
-	
-	/// Loads an area from a .schematic file. Returns true if successful
-	bool LoadFromSchematicFile(const AString & a_FileName);
-	
-	/// Saves the area into a .schematic file. Returns true if successful
-	bool SaveToSchematicFile(const AString & a_FileName);
-	
-	/// Crops the internal contents by the specified amount of blocks from each border.
-	void Crop(int a_AddMinX, int a_SubMaxX, int a_AddMinY, int a_SubMaxY, int a_AddMinZ, int a_SubMaxZ);
-	
-	/// Expands the internal contents by the specified amount of blocks from each border
-	void Expand(int a_SubMinX, int a_AddMaxX, int a_SubMinY, int a_AddMaxY, int a_SubMinZ, int a_AddMaxZ);
-	
-	/** Merges another block area into this one, using the specified block combinating strategy
-	This function combines another BlockArea into the current object.
-	The strategy parameter specifies how individual blocks are combined together, using the table below.
-
-	| area block |                 result              |
-	| this | Src | msOverwrite | msFillAir | msImprint |
-	+------+-----+-------------+-----------+-----------+
-	| air  | air | air         | air       | air       |
-	| A    | air | air         | A         | A         |
-	| air  | B   | B           | B         | B         |
-	| A    | B   | B           | A         | B         |
-	
-	So to sum up:
-	- msOverwrite completely overwrites all blocks with the Src's blocks
-	- msFillAir overwrites only those blocks that were air
-	- msImprint overwrites with only those blocks that are non-air
-
-	Special strategies:
-	msLake (evaluate top-down, first match wins):
-	|    area block     |        |
-	|   this   | Src    | result |
-	+----------+--------+--------+
-	| A        | sponge | A      |  Sponge is the NOP block
-	| *        | air    | air    |  Air always gets hollowed out, even under the oceans
-	| water    | *      | water  |  Water is never overwritten
-	| lava     | *      | lava   |  Lava is never overwritten
-	| *        | water  | water  |  Water always overwrites anything
-	| *        | lava   | lava   |  Lava always overwrites anything
-	| dirt     | stone  | stone  |  Stone overwrites dirt
-	| grass    | stone  | stone  |    ... and grass
-	| mycelium | stone  | stone  |    ... and mycelium
-	| A        | stone  | A      |    ... but nothing else
-	| A        | *      | A      |  Everything else is left as it is
-
-	*/
-	void Merge(const cBlockArea & a_Src, int a_RelX, int a_RelY, int a_RelZ, eMergeStrategy a_Strategy);
-	
-	/// Fills the entire block area with the specified data
-	void Fill(int a_DataTypes, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta = 0, NIBBLETYPE a_BlockLight = 0, NIBBLETYPE a_BlockSkyLight = 0x0f);
-	
-	/// Fills a cuboid inside the block area with the specified data
-	void FillRelCuboid(int a_MinRelX, int a_MaxRelX, int a_MinRelY, int a_MaxRelY, int a_MinRelZ, int a_MaxRelZ, 
-		int a_DataTypes, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta = 0,
-		NIBBLETYPE a_BlockLight = 0, NIBBLETYPE a_BlockSkyLight = 0x0f
-	);
-	
-	/// Draws a line from between two points with the specified data
-	void RelLine(int a_RelX1, int a_RelY1, int a_RelZ1, int a_RelX2, int a_RelY2, int a_RelZ2,
-		int a_DataTypes, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta = 0,
-		NIBBLETYPE a_BlockLight = 0, NIBBLETYPE a_BlockSkyLight = 0x0f
-	);
-	
-	/// Rotates the entire area counter-clockwise around the Y axis
-	void RotateCCW(void);
-	
-	/// Rotates the entire area clockwise around the Y axis
-	void RotateCW(void);
-	
-	/// Mirrors the entire area around the XY plane
-	void MirrorXY(void);
-	
-	/// Mirrors the entire area around the XZ plane
-	void MirrorXZ(void);
-	
-	/// Mirrors the entire area around the YZ plane
-	void MirrorYZ(void);
-	
-	/// Rotates the entire area counter-clockwise around the Y axis, doesn't use blockhandlers for block meta
-	void RotateCCWNoMeta(void);
-	
-	/// Rotates the entire area clockwise around the Y axis, doesn't use blockhandlers for block meta
-	void RotateCWNoMeta(void);
-	
-	/// Mirrors the entire area around the XY plane, doesn't use blockhandlers for block meta
-	void MirrorXYNoMeta(void);
-	
-	/// Mirrors the entire area around the XZ plane, doesn't use blockhandlers for block meta
-	void MirrorXZNoMeta(void);
-	
-	/// Mirrors the entire area around the YZ plane, doesn't use blockhandlers for block meta
-	void MirrorYZNoMeta(void);
-	
-	// Setters:
-	void SetRelBlockType    (int a_RelX,   int a_RelY,   int a_RelZ,   BLOCKTYPE  a_BlockType);
-	void SetBlockType       (int a_BlockX, int a_BlockY, int a_BlockZ, BLOCKTYPE  a_BlockType);
-	void SetRelBlockMeta    (int a_RelX,   int a_RelY,   int a_RelZ,   NIBBLETYPE a_BlockMeta);
-	void SetBlockMeta       (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_BlockMeta);
-	void SetRelBlockLight   (int a_RelX,   int a_RelY,   int a_RelZ,   NIBBLETYPE a_BlockLight);
-	void SetBlockLight      (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_BlockLight);
-	void SetRelBlockSkyLight(int a_RelX,   int a_RelY,   int a_RelZ,   NIBBLETYPE a_BlockSkyLight);
-	void SetBlockSkyLight   (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_BlockSkyLight);
-
-	// Getters:
-	BLOCKTYPE  GetRelBlockType    (int a_RelX,   int a_RelY,   int a_RelZ)   const;
-	BLOCKTYPE  GetBlockType       (int a_BlockX, int a_BlockY, int a_BlockZ) const;
-	NIBBLETYPE GetRelBlockMeta    (int a_RelX,   int a_RelY,   int a_RelZ)   const;
-	NIBBLETYPE GetBlockMeta       (int a_BlockX, int a_BlockY, int a_BlockZ) const;
-	NIBBLETYPE GetRelBlockLight   (int a_RelX,   int a_RelY,   int a_RelZ)   const;
-	NIBBLETYPE GetBlockLight      (int a_BlockX, int a_BlockY, int a_BlockZ) const;
-	NIBBLETYPE GetRelBlockSkyLight(int a_RelX,   int a_RelY,   int a_RelZ)   const;
-	NIBBLETYPE GetBlockSkyLight   (int a_BlockX, int a_BlockY, int a_BlockZ) const;
-
-	void SetBlockTypeMeta   (int a_BlockX, int a_BlockY, int a_BlockZ, BLOCKTYPE a_BlockType,   NIBBLETYPE a_BlockMeta);
-	void SetRelBlockTypeMeta(int a_RelX,   int a_RelY,   int a_RelZ,   BLOCKTYPE a_BlockType,   NIBBLETYPE a_BlockMeta);
-	void GetBlockTypeMeta   (int a_BlockX, int a_BlockY, int a_BlockZ, BLOCKTYPE & a_BlockType, NIBBLETYPE & a_BlockMeta) const;
-	void GetRelBlockTypeMeta(int a_RelX,   int a_RelY,   int a_RelZ,   BLOCKTYPE & a_BlockType, NIBBLETYPE & a_BlockMeta) const;
-	
-	int GetSizeX(void) const { return m_SizeX; }
-	int GetSizeY(void) const { return m_SizeY; }
-	int GetSizeZ(void) const { return m_SizeZ; }
-	
-	int GetOriginX(void) const { return m_OriginX; }
-	int GetOriginY(void) const { return m_OriginY; }
-	int GetOriginZ(void) const { return m_OriginZ; }
-	
-	/// Returns the datatypes that are stored in the object (bitmask of baXXX values)
-	int GetDataTypes(void) const;
-	
-	bool HasBlockTypes    (void) const { return (m_BlockTypes    != NULL); }
-	bool HasBlockMetas    (void) const { return (m_BlockMetas    != NULL); }
-	bool HasBlockLights   (void) const { return (m_BlockLight    != NULL); }
-	bool HasBlockSkyLights(void) const { return (m_BlockSkyLight != NULL); }
-	
-	// tolua_end
-	
-	// Clients can use these for faster access to all blocktypes. Be careful though!
-	/// Returns the internal pointer to the block types
-	BLOCKTYPE *  GetBlockTypes   (void) const { return m_BlockTypes; }
-	NIBBLETYPE * GetBlockMetas   (void) const { return m_BlockMetas; }     // NOTE: one byte per block!
-	NIBBLETYPE * GetBlockLight   (void) const { return m_BlockLight; }     // NOTE: one byte per block!
-	NIBBLETYPE * GetBlockSkyLight(void) const { return m_BlockSkyLight; }  // NOTE: one byte per block!
-	int          GetBlockCount(void) const { return m_SizeX * m_SizeY * m_SizeZ; }
-	int MakeIndex(int a_RelX, int a_RelY, int a_RelZ) const;
-
-protected:
-	friend class cChunkDesc;
-	
-	class cChunkReader :
-		public cChunkDataCallback
-	{
-	public:
-		cChunkReader(cBlockArea & a_Area);
-		
-	protected:
-		cBlockArea & m_Area;
-		int m_OriginX;
-		int m_OriginY;
-		int m_OriginZ;
-		int m_CurrentChunkX;
-		int m_CurrentChunkZ;
-		
-		void CopyNibbles(NIBBLETYPE * a_AreaDst, const NIBBLETYPE * a_ChunkSrc);
-		
-		// cChunkDataCallback overrides:
-		virtual bool Coords       (int a_ChunkX, int a_ChunkZ) override;
-		virtual void BlockTypes   (const BLOCKTYPE *  a_BlockTypes)    override;
-		virtual void BlockMeta    (const NIBBLETYPE * a_BlockMetas)    override;
-		virtual void BlockLight   (const NIBBLETYPE * a_BlockLight)    override;
-		virtual void BlockSkyLight(const NIBBLETYPE * a_BlockSkyLight) override;
-	} ;
-	
-	typedef NIBBLETYPE * NIBBLEARRAY;
-	
-	
-	int m_OriginX;
-	int m_OriginY;
-	int m_OriginZ;
-	int m_SizeX;
-	int m_SizeY;
-	int m_SizeZ;
-	
-	BLOCKTYPE *  m_BlockTypes;
-	NIBBLETYPE * m_BlockMetas;     // Each meta is stored as a separate byte for faster access
-	NIBBLETYPE * m_BlockLight;     // Each light value is stored as a separate byte for faster access
-	NIBBLETYPE * m_BlockSkyLight;  // Each light value is stored as a separate byte for faster access
-	
-	/// Clears the data stored and prepares a fresh new block area with the specified dimensions
-	bool SetSize(int a_SizeX, int a_SizeY, int a_SizeZ, int a_DataTypes);
-	
-	// Basic Setters:
-	void SetRelNibble(int a_RelX,   int a_RelY,   int a_RelZ,   NIBBLETYPE a_Value, NIBBLETYPE * a_Array);
-	void SetNibble   (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_Value, NIBBLETYPE * a_Array);
-
-	// Basic Getters:
-	NIBBLETYPE GetRelNibble(int a_RelX,   int a_RelY,   int a_RelZ,   NIBBLETYPE * a_Array) const;
-	NIBBLETYPE GetNibble   (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE * a_Array) const;
-	
-	// Crop helpers:
-	void CropBlockTypes(int a_AddMinX, int a_SubMaxX, int a_AddMinY, int a_SubMaxY, int a_AddMinZ, int a_SubMaxZ);
-	void CropNibbles   (NIBBLEARRAY & a_Array, int a_AddMinX, int a_SubMaxX, int a_AddMinY, int a_SubMaxY, int a_AddMinZ, int a_SubMaxZ);
-	
-	// Expand helpers:
-	void ExpandBlockTypes(int a_SubMinX, int a_AddMaxX, int a_SubMinY, int a_AddMaxY, int a_SubMinZ, int a_AddMaxZ);
-	void ExpandNibbles   (NIBBLEARRAY & a_Array, int a_SubMinX, int a_AddMaxX, int a_SubMinY, int a_AddMaxY, int a_SubMinZ, int a_AddMaxZ);
-	
-	/// Loads the area from a schematic file uncompressed and parsed into a NBT tree. Returns true if successful.
-	bool LoadFromSchematicNBT(cParsedNBT & a_NBT);
-
-	/// Sets the specified datatypes at the specified location.
-	void RelSetData(
-		int a_RelX, int a_RelY, int a_RelZ, 
-		int a_DataTypes, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta,
-		NIBBLETYPE a_BlockLight, NIBBLETYPE a_BlockSkyLight
-	);
-	// tolua_begin
-} ;
-// tolua_end
-
-
-
-