1 files changed, 0 insertions, 181 deletions

diff --git a/source/LightingThread.h b/source/LightingThread.h
deleted file mode 100644
index 498755025..000000000
--- a/source/LightingThread.h
+++ /dev/null
@@ -1,181 +0,0 @@
-
-// LightingThread.h
-
-// Interfaces to the cLightingThread class representing the thread that processes requests for lighting
-
-/*
-Lighting is done on whole chunks. For each chunk to be lighted, the whole 3x3 chunk area around it is read,
-then it is processed, so that the middle chunk area has valid lighting, and the lighting is copied into the ChunkMap.
-Lighting is calculated in full char arrays instead of nibbles, so that accessing the arrays is fast.
-Lighting is calculated in a flood-fill fashion:
-1. Generate seeds from where the light spreads (full skylight / light-emitting blocks)
-2. For each seed:
-	- Spread the light 1 block in each of the 6 cardinal directions, if the blocktype allows
-	- If the recipient block has had lower lighting value than that being spread, make it a new seed
-3. Repeat step 2, until there are no more seeds
-The seeds need two fast operations:
-	- Check if a block at [x, y, z] is already a seed
-	- Get the next seed in the row
-For that reason it is stored in two arrays, one stores a bool saying a seed is in that position, 
-the other is an array of seed coords, encoded as a single int.
-Step 2 needs two separate storages for old seeds and new seeds, so there are two actual storages for that purpose,
-their content is swapped after each full step-2-cycle.
-
-The thread has two queues of chunks that are to be lighted.
-The first queue, m_Queue, is the only one that is publicly visible, chunks get queued there by external requests.
-The second one, m_PostponedQueue, is for chunks that have been taken out of m_Queue and didn't have neighbors ready.
-Chunks from m_PostponedQueue are moved back into m_Queue when their neighbors get valid, using the ChunkReady callback.
-*/
-
-
-
-#pragma once
-
-#include "OSSupport/IsThread.h"
-#include "ChunkDef.h"
-
-
-
-
-
-// fwd: "cWorld.h"
-class cWorld;
-
-// fwd: "cChunkMap.h"
-class cChunkStay;
-
-
-
-
-
-class cLightingThread :
-	public cIsThread
-{
-	typedef cIsThread super;
-	
-public:
-	
-	cLightingThread(void);
-	~cLightingThread();
-	
-	bool Start(cWorld * a_World);
-	
-	void Stop(void);
-	
-	/// Queues the entire chunk for lighting
-	void QueueChunk(int a_ChunkX, int a_ChunkZ, cChunkCoordCallback * a_CallbackAfter = NULL);
-	
-	/// Blocks until the queue is empty or the thread is terminated
-	void WaitForQueueEmpty(void);
-	
-	size_t GetQueueLength(void);
-	
-	/// Called from cWorld when a chunk gets valid. Chunks in m_PostponedQueue may need moving into m_Queue
-	void ChunkReady(int a_ChunkX, int a_ChunkZ);
-	
-protected:
-
-	struct sItem
-	{
-		int x, z;
-		cChunkStay * m_ChunkStay;
-		cChunkCoordCallback * m_Callback;
-		
-		sItem(void) {}  // empty default constructor needed
-		sItem(int a_X, int a_Z, cChunkStay * a_ChunkStay, cChunkCoordCallback * a_Callback) :
-			x(a_X),
-			z(a_Z),
-			m_ChunkStay(a_ChunkStay),
-			m_Callback(a_Callback)
-		{
-		}
-	} ;
-	
-	typedef std::list<sItem> sItems;
-	
-	cWorld *         m_World;
-	cCriticalSection m_CS;
-	sItems           m_Queue;
-	sItems           m_PostponedQueue;  // Chunks that have been postponed due to missing neighbors
-	cEvent           m_evtItemAdded;    // Set when queue is appended, or to stop the thread
-	cEvent           m_evtQueueEmpty;   // Set when the queue gets empty
-	
-	// Buffers for the 3x3 chunk data
-	// These buffers alone are 1.7 MiB in size, therefore they cannot be located on the stack safely - some architectures may have only 1 MiB for stack, or even less
-	// Placing the buffers into the object means that this object can light chunks only in one thread!
-	// The blobs are XZY organized as a whole, instead of 3x3 XZY-organized subarrays ->
-	//  -> This means data has to be scatterred when reading and gathered when writing!
-	static const int BlocksPerYLayer = cChunkDef::Width * cChunkDef::Width * 3 * 3;
-	BLOCKTYPE  m_BlockTypes[BlocksPerYLayer * cChunkDef::Height];
-	NIBBLETYPE m_BlockLight[BlocksPerYLayer * cChunkDef::Height];
-	NIBBLETYPE m_SkyLight  [BlocksPerYLayer * cChunkDef::Height];
-	HEIGHTTYPE m_HeightMap [BlocksPerYLayer];
-	
-	// Seed management (5.7 MiB)
-	// Two buffers, in each calc step one is set as input and the other as output, then in the next step they're swapped
-	// Each seed is represented twice in this structure - both as a "list" and as a "position".
-	// "list" allows fast traversal from seed to seed
-	// "position" allows fast checking if a coord is already a seed
-	unsigned char m_IsSeed1 [BlocksPerYLayer * cChunkDef::Height];
-	unsigned int  m_SeedIdx1[BlocksPerYLayer * cChunkDef::Height];
-	unsigned char m_IsSeed2 [BlocksPerYLayer * cChunkDef::Height];
-	unsigned int  m_SeedIdx2[BlocksPerYLayer * cChunkDef::Height];
-	int m_NumSeeds;
-
-	virtual void Execute(void) override;
-
-	/// Lights the entire chunk. If neighbor chunks don't exist, touches them and re-queues the chunk
-	void LightChunk(sItem & a_Item);
-	
-	/// Prepares m_BlockTypes and m_HeightMap data; returns false if any of the chunks fail. Zeroes out the light arrays
-	bool ReadChunks(int a_ChunkX, int a_ChunkZ);
-	
-	/// Uses m_HeightMap to initialize the m_SkyLight[] data; fills in seeds for the skylight
-	void PrepareSkyLight(void);
-	
-	/// Uses m_BlockTypes to initialize the m_BlockLight[] data; fills in seeds for the blocklight
-	void PrepareBlockLight(void);
-	
-	/// Calculates light in the light array specified, using stored seeds
-	void CalcLight(NIBBLETYPE * a_Light);
-	
-	/// Does one step in the light calculation - one seed propagation and seed recalculation
-	void CalcLightStep(
-		NIBBLETYPE * a_Light, 
-		int a_NumSeedsIn,    unsigned char * a_IsSeedIn,  unsigned int * a_SeedIdxIn,
-		int & a_NumSeedsOut, unsigned char * a_IsSeedOut, unsigned int * a_SeedIdxOut
-	);
-	
-	/// Compresses from 1-block-per-byte (faster calc) into 2-blocks-per-byte (MC storage):
-	void CompressLight(NIBBLETYPE * a_LightArray, NIBBLETYPE * a_ChunkLight);
-	
-	inline void PropagateLight(
-		NIBBLETYPE * a_Light, 
-		int a_SrcIdx, int a_DstIdx,
-		int & a_NumSeedsOut, unsigned char * a_IsSeedOut, unsigned int * a_SeedIdxOut
-	)
-	{
-		ASSERT(a_SrcIdx >= 0);
-		ASSERT(a_SrcIdx < ARRAYCOUNT(m_SkyLight));
-		ASSERT(a_DstIdx >= 0);
-		ASSERT(a_DstIdx < ARRAYCOUNT(m_BlockTypes));
-		
-		if (a_Light[a_SrcIdx] <= a_Light[a_DstIdx] + g_BlockSpreadLightFalloff[m_BlockTypes[a_DstIdx]])
-		{
-			// We're not offering more light than the dest block already has
-			return;
-		}
-
-		a_Light[a_DstIdx] = a_Light[a_SrcIdx] - g_BlockSpreadLightFalloff[m_BlockTypes[a_DstIdx]];
-		if (!a_IsSeedOut[a_DstIdx])
-		{
-			a_IsSeedOut[a_DstIdx] = true;
-			a_SeedIdxOut[a_NumSeedsOut++] = a_DstIdx;
-		}
-	}
-	
-} ;
-
-
-
-