1 files changed, 0 insertions, 179 deletions

diff --git a/zlib-1.2.7/adler32.c b/zlib-1.2.7/adler32.c
deleted file mode 100644
index a868f073d..000000000
--- a/zlib-1.2.7/adler32.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2011 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-#define local static
-
-local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
-
-#define BASE 65521      /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* use NO_DIVIDE if your processor does not do division in hardware --
-   try it both ways to see which is faster */
-#ifdef NO_DIVIDE
-/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
-   (thank you to John Reiser for pointing this out) */
-#  define CHOP(a) \
-    do { \
-        unsigned long tmp = a >> 16; \
-        a &= 0xffffUL; \
-        a += (tmp << 4) - tmp; \
-    } while (0)
-#  define MOD28(a) \
-    do { \
-        CHOP(a); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#  define MOD(a) \
-    do { \
-        CHOP(a); \
-        MOD28(a); \
-    } while (0)
-#  define MOD63(a) \
-    do { /* this assumes a is not negative */ \
-        z_off64_t tmp = a >> 32; \
-        a &= 0xffffffffL; \
-        a += (tmp << 8) - (tmp << 5) + tmp; \
-        tmp = a >> 16; \
-        a &= 0xffffL; \
-        a += (tmp << 4) - tmp; \
-        tmp = a >> 16; \
-        a &= 0xffffL; \
-        a += (tmp << 4) - tmp; \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#else
-#  define MOD(a) a %= BASE
-#  define MOD28(a) a %= BASE
-#  define MOD63(a) a %= BASE
-#endif
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    unsigned long sum2;
-    unsigned n;
-
-    /* split Adler-32 into component sums */
-    sum2 = (adler >> 16) & 0xffff;
-    adler &= 0xffff;
-
-    /* in case user likes doing a byte at a time, keep it fast */
-    if (len == 1) {
-        adler += buf[0];
-        if (adler >= BASE)
-            adler -= BASE;
-        sum2 += adler;
-        if (sum2 >= BASE)
-            sum2 -= BASE;
-        return adler | (sum2 << 16);
-    }
-
-    /* initial Adler-32 value (deferred check for len == 1 speed) */
-    if (buf == Z_NULL)
-        return 1L;
-
-    /* in case short lengths are provided, keep it somewhat fast */
-    if (len < 16) {
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        if (adler >= BASE)
-            adler -= BASE;
-        MOD28(sum2);            /* only added so many BASE's */
-        return adler | (sum2 << 16);
-    }
-
-    /* do length NMAX blocks -- requires just one modulo operation */
-    while (len >= NMAX) {
-        len -= NMAX;
-        n = NMAX / 16;          /* NMAX is divisible by 16 */
-        do {
-            DO16(buf);          /* 16 sums unrolled */
-            buf += 16;
-        } while (--n);
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* do remaining bytes (less than NMAX, still just one modulo) */
-    if (len) {                  /* avoid modulos if none remaining */
-        while (len >= 16) {
-            len -= 16;
-            DO16(buf);
-            buf += 16;
-        }
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* return recombined sums */
-    return adler | (sum2 << 16);
-}
-
-/* ========================================================================= */
-local uLong adler32_combine_(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    unsigned long sum1;
-    unsigned long sum2;
-    unsigned rem;
-
-    /* for negative len, return invalid adler32 as a clue for debugging */
-    if (len2 < 0)
-        return 0xffffffffUL;
-
-    /* the derivation of this formula is left as an exercise for the reader */
-    MOD63(len2);                /* assumes len2 >= 0 */
-    rem = (unsigned)len2;
-    sum1 = adler1 & 0xffff;
-    sum2 = rem * sum1;
-    MOD(sum2);
-    sum1 += (adler2 & 0xffff) + BASE - 1;
-    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum1 >= BASE) sum1 -= BASE;
-    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
-    if (sum2 >= BASE) sum2 -= BASE;
-    return sum1 | (sum2 << 16);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}
-
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}