diff options
| -rw-r--r-- | MCServer/Plugins/APIDump/APIDesc.lua | 37 | ||||
| -rw-r--r-- | MCServer/Plugins/APIDump/Classes/Geometry.lua | 2 | ||||
| -rw-r--r-- | src/Bindings/LuaState.cpp | 14 | ||||
| -rw-r--r-- | src/Bindings/LuaState.h | 7 | ||||
| -rw-r--r-- | src/Bindings/ManualBindings.cpp | 6 | ||||
| -rw-r--r-- | src/Bindings/PluginLua.cpp | 1 | ||||
| -rw-r--r-- | src/BlockArea.cpp | 19 | ||||
| -rw-r--r-- | src/BlockArea.h | 7 | ||||
| -rw-r--r-- | src/Entities/ProjectileEntity.cpp | 26 | ||||
| -rw-r--r-- | src/Entities/ProjectileEntity.h | 1 | ||||
| -rw-r--r-- | src/Generating/PieceGenerator.cpp | 2 | ||||
| -rw-r--r-- | src/WebAdmin.cpp | 1 | ||||
| -rw-r--r-- | src/WorldStorage/SchematicFileSerializer.cpp | 23 |
13 files changed, 124 insertions, 22 deletions
diff --git a/MCServer/Plugins/APIDump/APIDesc.lua b/MCServer/Plugins/APIDump/APIDesc.lua index 28dffc1b6..c5599b212 100644 --- a/MCServer/Plugins/APIDump/APIDesc.lua +++ b/MCServer/Plugins/APIDump/APIDesc.lua @@ -114,7 +114,7 @@ g_APIDesc = GetBlockSkyLight = { Params = "BlockX, BlockY, BlockZ", Return = "NIBBLETYPE", Notes = "Returns the skylight at the specified absolute coords" }, GetBlockType = { Params = "BlockX, BlockY, BlockZ", Return = "BLOCKTYPE", Notes = "Returns the block type at the specified absolute coords" }, GetBlockTypeMeta = { Params = "BlockX, BlockY, BlockZ", Return = "BLOCKTYPE, NIBBLETYPE", Notes = "Returns the block type and meta at the specified absolute coords" }, - GetDataTypes = { Params = "", Return = "number", Notes = "Returns the mask of datatypes that the objectis currently holding" }, + GetDataTypes = { Params = "", Return = "number", Notes = "Returns the mask of datatypes that the object is currently holding" }, GetOrigin = { Params = "", Return = "OriginX, OriginY, OriginZ", Notes = "Returns the origin coords of where the area was read from." }, GetOriginX = { Params = "", Return = "number", Notes = "Returns the origin x-coord" }, GetOriginY = { Params = "", Return = "number", Notes = "Returns the origin y-coord" }, @@ -129,6 +129,7 @@ g_APIDesc = GetSizeY = { Params = "", Return = "number", Notes = "Returns the size of the held data in the y-axis" }, GetSizeZ = { Params = "", Return = "number", Notes = "Returns the size of the held data in the z-axis" }, GetVolume = { Params = "", Return = "number", Notes = "Returns the volume of the area - the total number of blocks stored within." }, + GetWEOffset = { Params = "", Return = "{{Vector3i}}", Notes = "Returns the WE offset, a data value sometimes stored in the schematic files. MCServer doesn't use this value, but provides access to it using this method. The default is {0, 0, 0}."}, HasBlockLights = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include blocklight" }, HasBlockMetas = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include block metas" }, HasBlockSkyLights = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include skylight" }, @@ -178,6 +179,11 @@ g_APIDesc = SetRelBlockSkyLight = { Params = "RelBlockX, RelBlockY, RelBlockZ, SkyLight", Return = "", Notes = "Sets the skylight at the specified relative coords" }, SetRelBlockType = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType", Return = "", Notes = "Sets the block type at the specified relative coords" }, SetRelBlockTypeMeta = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType, BlockMeta", Return = "", Notes = "Sets the block type and meta at the specified relative coords" }, + SetWEOffset = + { + { Params = "{{Vector3i|Offset}}", Return = "", Notes = "Sets the WE offset, a data value sometimes stored in the schematic files. Mostly used for WorldEdit. MCServer doesn't use this value, but provides access to it using this method." }, + { Params = "OffsetX, OffsetY, OffsetZ", Return = "", Notes = "Sets the WE offset, a data value sometimes stored in the schematic files. Mostly used for WorldEdit. MCServer doesn't use this value, but provides access to it using this method." }, + }, Write = { { Params = "World, {{Vector3i|MinPoint}}, DataTypes", Return = "bool", Notes = "Writes the area into World at the specified coords, returns true if successful" }, @@ -417,6 +423,7 @@ g_APIDesc = SetUseDefaultFinish = { Params = "bool", Return = "", Notes = "Sets the chunk to use default finishers or not" }, SetUseDefaultHeight = { Params = "bool", Return = "", Notes = "Sets the chunk to use default height generator or not" }, SetUseDefaultStructures = { Params = "bool", Return = "", Notes = "Sets the chunk to use default structures or not" }, + UpdateHeightmap = { Params = "", Return = "", Notes = "Updates the heightmap to match current contents. The plugins should do that if they modify the contents and don't modify the heightmap accordingly; MCServer expects (and checks in Debug mode) that the heightmap matches the contents when the cChunkDesc is returned from a plugin." }, WriteBlockArea = { Params = "{{cBlockArea|BlockArea}}, MinRelX, MinRelY, MinRelZ", Return = "", Notes = "Writes data from the block area into the chunk" }, }, AdditionalInfo = @@ -466,6 +473,7 @@ end Functions = { + GetLocale = { Params = "", Return = "Locale", Notes = "Returns the locale string that the client sends as part of the protocol handshake. Can be used to provide localized strings." }, GetPing = { Params = "", Return = "number", Notes = "Returns the ping time, in ms" }, GetPlayer = { Params = "", Return = "{{cPlayer|cPlayer}}", Notes = "Returns the player object connected to this client. Note that this may be nil, for example if the player object is not yet spawned." }, GetUniqueID = { Params = "", Return = "number", Notes = "Returns the UniqueID of the client used to identify the client in the server" }, @@ -474,6 +482,7 @@ end HasPluginChannel = { Params = "ChannelName", Return = "bool", Notes = "Returns true if the client has registered to receive messages on the specified plugin channel." }, Kick = { Params = "Reason", Return = "", Notes = "Kicks the user with the specified reason" }, SendPluginMessage = { Params = "Channel, Message", Return = "", Notes = "Sends the plugin message on the specified channel." }, + SetLocale = { Params = "Locale", Return = "", Notes = "Sets the locale that MCServer keeps on record. Initially the locale is initialized in protocol handshake, this function allows plugins to override the stored value (but only server-side and only until the user disconnects)." }, SetUsername = { Params = "Name", Return = "", Notes = "Sets the username" }, SetViewDistance = { Params = "ViewDistance", Return = "", Notes = "Sets the viewdistance (number of chunks loaded for the player in each direction)" }, SendBlockChange = { Params = "BlockX, BlockY, BlockZ, BlockType, BlockMeta", Return = "", Notes = "Sends a BlockChange packet to the client. This can be used to create fake blocks only for that player." }, @@ -877,7 +886,6 @@ cFile:Delete("/usr/bin/virus.exe"); SetColor = { Return = "" }, GetColor = { Return = "string" }, AddCommand = { Return = "" }, - HasCommand = { Return = "bool" }, AddPermission = { Return = "" }, InheritFrom = { Return = "" }, }, @@ -1144,7 +1152,6 @@ These ItemGrids are available in the API and can be manipulated by the plugins, IsEnchantable = { Params = "", Return = "bool", Notes = "Returns true if the item is enchantable" }, IsFullStack = { Params = "", Return = "bool", Notes = "Returns true if the item is stacked up to its maximum stacking" }, IsSameType = { Params = "cItem", Return = "bool", Notes = "Returns true if the item in the parameter is of the same ItemType as the one stored in the object. This is true even if the two items have different enchantments" }, - IsStackableWith = { Params = "cItem", Return = "bool", Notes = "Returns true if the item in the parameter is stackable with the one stored in the object. Two items with different enchantments cannot be stacked" }, IsBothNameAndLoreEmpty = { Params = "", Return = "bool", Notes = "Returns if both the custom name and lore are not set." }, IsCustomNameEmpty = { Params = "", Return = "bool", Notes = "Returns if the custom name of the cItem is empty." }, IsLoreEmpty = { Params = "", Return = "", Notes = "Returns if the lore of the cItem is empty." }, @@ -1650,7 +1657,6 @@ a_Player:OpenWindow(Window); AddToGroup = { Params = "GroupName", Return = "", Notes = "Temporarily adds the player to the specified group. The assignment is lost when the player disconnects." }, CalcLevelFromXp = { Params = "XPAmount", Return = "number", Notes = "(STATIC) Returns the level which is reached with the specified amount of XP. Inverse of XpForLevel()." }, CanFly = { Return = "bool", Notes = "Returns if the player is able to fly." }, - CanUseCommand = { Params = "Command", Return = "bool", Notes = "Returns true if the player is allowed to use the specified command." }, CloseWindow = { Params = "[CanRefuse]", Return = "", Notes = "Closes the currently open UI window. If CanRefuse is true (default), the window may refuse the closing." }, CloseWindowIfID = { Params = "WindowID, [CanRefuse]", Return = "", Notes = "Closes the currently open UI window if its ID matches the given ID. If CanRefuse is true (default), the window may refuse the closing." }, DeltaExperience = { Params = "DeltaXP", Return = "", Notes = "Adds or removes XP from the current XP amount. Won't allow XP to go negative. Returns the new experience, -1 on error (XP overflow)." }, @@ -1727,7 +1733,6 @@ a_Player:OpenWindow(Window); SetSprint = { Params = "IsSprinting", Return = "", Notes = "Sets whether the player is sprinting or not." }, SetSprintingMaxSpeed = { Params = "SprintingMaxSpeed", Return = "", Notes = "Sets the sprinting maximum speed (as reported by the 1.6.1+ protocols)" }, SetVisible = { Params = "IsVisible", Return = "", Notes = "Sets the player visibility to other players" }, - TossItem = { Params = "DraggedItem, [Amount], [CreateType], [CreateDamage]", Return = "", Notes = "FIXME: This function will be rewritten, avoid it. It tosses an item, either from the inventory, dragged in hand (while in UI window) or a newly created one." }, XpForLevel = { Params = "XPLevel", Return = "number", Notes = "(STATIC) Returns the total amount of XP needed for the specified XP level. Inverse of CalcLevelFromXp()." }, }, Constants = @@ -1789,13 +1794,13 @@ cPluginManager.AddHook(cPluginManager.HOOK_CHAT, OnChatMessage); }, BindCommand = { - { Params = "Command, Permission, Callback, HelpString", Return = "", Notes = "(STATIC) Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display." }, - { Params = "Command, Permission, Callback, HelpString", Return = "", Notes = "Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display." }, + { Params = "Command, Permission, Callback, HelpString", Return = "[bool]", Notes = "(STATIC) Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display. Returns true if successful, logs to console and returns no value on error." }, + { Params = "Command, Permission, Callback, HelpString", Return = "[bool]", Notes = "Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display. Returns true if successful, logs to console and returns no value on error." }, }, BindConsoleCommand = { - { Params = "Command, Callback, HelpString", Return = "", Notes = "(STATIC) Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command." }, - { Params = "Command, Callback, HelpString", Return = "", Notes = "Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command." }, + { Params = "Command, Callback, HelpString", Return = "[bool]", Notes = "(STATIC) Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command. Returns true if successful, logs to console and returns no value on error." }, + { Params = "Command, Callback, HelpString", Return = "[bool]", Notes = "Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command. Returns true if successful, logs to console and returns no value on error." }, }, CallPlugin = { Params = "PluginName, FunctionName, [FunctionArgs...]", Return = "[FunctionRets]", Notes = "(STATIC) Calls the specified function in the specified plugin, passing all the given arguments to it. If it succeeds, it returns all the values returned by that function. If it fails, returns no value at all. Note that only strings, numbers, bools, nils and classes can be used for parameters and return values; tables and functions cannot be copied across plugins." }, DisablePlugin = { Params = "PluginName", Return = "bool", Notes = "Disables a plugin specified by its name. Returns true if the plugin was disabled, false if it wasn't found or wasn't active." }, @@ -2624,7 +2629,8 @@ end ]], Functions = { - AddFaceDirection = {Params = "BlockX, BlockY, BlockZ, BlockFace, [IsInverse]", Return = "BlockX, BlockY, BlockZ", Notes = "Returns the coords of a block adjacent to the specified block through the specified {{Globals#BlockFace|face}}"}, + AddFaceDirection = {Params = "BlockX, BlockY, BlockZ, BlockFace, [IsInverse]", Return = "BlockX, BlockY, BlockZ", Notes = "Returns the coords of a block adjacent to the specified block through the specified {{Globals#BlockFaces|face}}"}, + BlockFaceToString = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "string", Notes = "Returns the string representation of the {{Globals#BlockFaces|eBlockFace}} constant. Uses the axis-direction-based names, such as BLOCK_FACE_XP." }, BlockStringToType = {Params = "BlockTypeString", Return = "BLOCKTYPE", Notes = "Returns the block type parsed from the given string"}, ClickActionToString = {Params = "{{Globals#ClickAction|ClickAction}}", Return = "string", Notes = "Returns a string description of the ClickAction enumerated value"}, DamageTypeToString = {Params = "{{Globals#DamageType|DamageType}}", Return = "string", Notes = "Converts the {{Globals#DamageType|DamageType}} enumerated value to a string representation "}, @@ -2643,9 +2649,12 @@ end LOGINFO = {Params = "string", Notes = "Logs a text into the server console using 'info' severity (yellow text)"}, LOGWARN = {Params = "string", Notes = "Logs a text into the server console using 'warning' severity (red text); OBSOLETE, use LOGWARNING() instead"}, LOGWARNING = {Params = "string", Notes = "Logs a text into the server console using 'warning' severity (red text)"}, + MirrorBlockFaceY = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after mirroring it around the Y axis (or rotating 180 degrees around it)." }, NoCaseCompare = {Params = "string, string", Return = "number", Notes = "Case-insensitive string comparison; returns 0 if the strings are the same"}, NormalizeAngleDegrees = { Params = "AngleDegrees", Return = "AngleDegrees", Notes = "Returns the angle, wrapped into the [-180, +180) range." }, ReplaceString = {Params = "full-string, to-be-replaced-string, to-replace-string", Notes = "Replaces *each* occurence of to-be-replaced-string in full-string with to-replace-string"}, + RotateBlockFaceCCW = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after rotating it around the Y axis 90 degrees counter-clockwise." }, + RotateBlockFaceCW = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after rotating it around the Y axis 90 degrees clockwise." }, StringSplit = {Params = "string, SeperatorsString", Return = "array table of strings", Notes = "Seperates string into multiple by splitting every time any of the characters in SeperatorsString is encountered."}, StringSplitAndTrim = {Params = "string, SeperatorsString", Return = "array table of strings", Notes = "Seperates string into multiple by splitting every time any of the characters in SeperatorsString is encountered. Each of the separate strings is trimmed (whitespace removed from the beginning and end of the string)"}, StringToBiome = {Params = "string", Return = "{{Globals#BiomeTypes|BiomeType}}", Notes = "Converts a string representation to a {{Globals#BiomeTypes|BiomeType}} enumerated value"}, @@ -2692,7 +2701,13 @@ end Include = "^BLOCK_FACE_.*", TextBefore = [[ These constants are used to describe individual faces of the block. They are used when the - client is interacting with a block, or when the {{cLineBlockTracer}} hits a block, etc. + client is interacting with a block in the {{OnPlayerBreakingBlock|HOOK_PLAYER_BREAKING_BLOCK}}, + {{OnPlayerBrokenBlock|HOOK_PLAYER_BROKEN_BLOCK}}, {{OnPlayerLeftClick|HOOK_PLAYER_LEFT_CLICK}}, + {{OnPlayerPlacedBlock|HOOK_PLAYER_PLACED_BLOCK}}, {{OnPlayerPlacingBlock|HOOK_PLAYER_PLACING_BLOCK}}, + {{OnPlayerRightClick|HOOK_PLAYER_RIGHT_CLICK}}, {{OnPlayerUsedBlock|HOOK_PLAYER_USED_BLOCK}}, + {{OnPlayerUsedItem|HOOK_PLAYER_USED_ITEM}}, {{OnPlayerUsingBlock|HOOK_PLAYER_USING_BLOCK}}, + and {{OnPlayerUsingItem|HOOK_PLAYER_USING_ITEM}} hooks, or when the {{cLineBlockTracer}} hits a + block, etc. ]], }, ClickAction = diff --git a/MCServer/Plugins/APIDump/Classes/Geometry.lua b/MCServer/Plugins/APIDump/Classes/Geometry.lua index e83d6e4b1..6f95c4cbf 100644 --- a/MCServer/Plugins/APIDump/Classes/Geometry.lua +++ b/MCServer/Plugins/APIDump/Classes/Geometry.lua @@ -76,6 +76,7 @@ return DifY = { Params = "", Return = "number", Notes = "Returns the difference between the two Y coords (Y-size minus 1). Assumes sorted." }, DifZ = { Params = "", Return = "number", Notes = "Returns the difference between the two Z coords (Z-size minus 1). Assumes sorted." }, DoesIntersect = { Params = "OtherCuboid", Return = "bool", Notes = "Returns true if this cuboid has at least one voxel in common with OtherCuboid. Note that edges are considered inclusive. Assumes both sorted." }, + Engulf = { Params = "{{Vector3i|Point}}", Return = "", Notes = "If needed, expands the cuboid to include the specified point. Doesn't shrink. Assumes sorted. " }, Expand = { Params = "SubMinX, AddMaxX, SubMinY, AddMaxY, SubMinZ, AddMaxZ", Return = "", Notes = "Expands the cuboid by the specified amount in each direction. Works on unsorted cuboids as well. NOTE: this function doesn't check for underflows." }, GetVolume = { Params = "", Return = "number", Notes = "Returns the volume of the cuboid, in blocks. Note that the volume considers both coords inclusive. Works on unsorted cuboids, too." }, IsCompletelyInside = { Params = "OuterCuboid", Return = "bool", Notes = "Returns true if this cuboid is completely inside (in all directions) in OuterCuboid. Assumes both sorted." }, @@ -308,6 +309,7 @@ end }, Equals = { Params = "Vector3i", Return = "bool", Notes = "Returns true if this vector is exactly the same as the specified vector." }, Length = { Params = "", Return = "number", Notes = "Returns the (euclidean) length of this vector." }, + Move = { Params = "X, Y, Z", Return = "", Notes = "Moves the vector by the specified amount in each axis direction." }, Set = { Params = "x, y, z", Return = "", Notes = "Sets all the coords of the vector at once" }, SqrLength = { Params = "", Return = "number", Notes = "Returns the (euclidean) length of this vector, squared. This operation is slightly less computationally expensive than Length(), while it conserves some properties of Length(), such as comparison." }, }, diff --git a/src/Bindings/LuaState.cpp b/src/Bindings/LuaState.cpp index aa6ee05b3..dfc428bbc 100644 --- a/src/Bindings/LuaState.cpp +++ b/src/Bindings/LuaState.cpp @@ -94,12 +94,20 @@ void cLuaState::Create(void) } m_LuaState = lua_open(); luaL_openlibs(m_LuaState); + m_IsOwned = true; +} + + + + + +void cLuaState::RegisterAPILibs(void) +{ tolua_AllToLua_open(m_LuaState); ManualBindings::Bind(m_LuaState); DeprecatedBindings::Bind(m_LuaState); luaopen_lsqlite3(m_LuaState); luaopen_lxp(m_LuaState); - m_IsOwned = true; } @@ -734,10 +742,6 @@ void cLuaState::GetStackValue(int a_StackPos, AString & a_Value) { a_Value.assign(data, len); } - else - { - a_Value.clear(); - } } diff --git a/src/Bindings/LuaState.h b/src/Bindings/LuaState.h index 1156f5363..73f9629cb 100644 --- a/src/Bindings/LuaState.h +++ b/src/Bindings/LuaState.h @@ -140,9 +140,14 @@ public: /** Allows this object to be used in the same way as a lua_State *, for example in the LuaLib functions */ operator lua_State * (void) { return m_LuaState; } - /** Creates the m_LuaState, if not closed already. This state will be automatically closed in the destructor */ + /** Creates the m_LuaState, if not closed already. This state will be automatically closed in the destructor. + The regular Lua libs are registered, but the MCS API is not registered (so that Lua can be used as + lite-config as well), use RegisterAPILibs() to do that. */ void Create(void); + /** Registers all the API libraries that MCS provides into m_LuaState. */ + void RegisterAPILibs(void); + /** Closes the m_LuaState, if not closed already */ void Close(void); diff --git a/src/Bindings/ManualBindings.cpp b/src/Bindings/ManualBindings.cpp index a5247bbe6..462ef3682 100644 --- a/src/Bindings/ManualBindings.cpp +++ b/src/Bindings/ManualBindings.cpp @@ -1497,7 +1497,8 @@ static int tolua_cPluginManager_BindCommand(lua_State * L) } Plugin->BindCommand(Command, FnRef); - return 0; + lua_pushboolean(L, true); + return 1; } @@ -1561,7 +1562,8 @@ static int tolua_cPluginManager_BindConsoleCommand(lua_State * L) } Plugin->BindConsoleCommand(Command, FnRef); - return 0; + lua_pushboolean(L, true); + return 1; } diff --git a/src/Bindings/PluginLua.cpp b/src/Bindings/PluginLua.cpp index 45c8216be..cccbc3c93 100644 --- a/src/Bindings/PluginLua.cpp +++ b/src/Bindings/PluginLua.cpp @@ -75,6 +75,7 @@ bool cPluginLua::Initialize(void) if (!m_LuaState.IsValid()) { m_LuaState.Create(); + m_LuaState.RegisterAPILibs(); // Inject the identification global variables into the state: lua_pushlightuserdata(m_LuaState, this); diff --git a/src/BlockArea.cpp b/src/BlockArea.cpp index d07ef747a..406e18a3b 100644 --- a/src/BlockArea.cpp +++ b/src/BlockArea.cpp @@ -168,6 +168,7 @@ cBlockArea::cBlockArea(void) : m_SizeX(0), m_SizeY(0), m_SizeZ(0), + m_WEOffset(0, 0, 0), m_BlockTypes(NULL), m_BlockMetas(NULL), m_BlockLight(NULL), @@ -254,6 +255,24 @@ void cBlockArea::Create(int a_SizeX, int a_SizeY, int a_SizeZ, int a_DataTypes) +void cBlockArea::SetWEOffset(int a_OffsetX, int a_OffsetY, int a_OffsetZ) +{ + m_WEOffset.Set(a_OffsetX, a_OffsetY, a_OffsetZ); +} + + + + + +void cBlockArea::SetWEOffset(const Vector3i & a_Offset) +{ + m_WEOffset.Set(a_Offset.x, a_Offset.y, a_Offset.z); +} + + + + + void cBlockArea::SetOrigin(int a_OriginX, int a_OriginY, int a_OriginZ) { m_OriginX = a_OriginX; diff --git a/src/BlockArea.h b/src/BlockArea.h index 0e52a5de0..e0e8fe972 100644 --- a/src/BlockArea.h +++ b/src/BlockArea.h @@ -209,6 +209,8 @@ public: void SetBlockLight (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_BlockLight); void SetRelBlockSkyLight(int a_RelX, int a_RelY, int a_RelZ, NIBBLETYPE a_BlockSkyLight); void SetBlockSkyLight (int a_BlockX, int a_BlockY, int a_BlockZ, NIBBLETYPE a_BlockSkyLight); + void SetWEOffset (int a_OffsetX, int a_OffsetY, int a_OffsetZ); + void SetWEOffset (const Vector3i & a_Offset); // Getters: BLOCKTYPE GetRelBlockType (int a_RelX, int a_RelY, int a_RelZ) const; @@ -219,6 +221,7 @@ public: NIBBLETYPE GetBlockLight (int a_BlockX, int a_BlockY, int a_BlockZ) const; NIBBLETYPE GetRelBlockSkyLight(int a_RelX, int a_RelY, int a_RelZ) const; NIBBLETYPE GetBlockSkyLight (int a_BlockX, int a_BlockY, int a_BlockZ) const; + const Vector3i & GetWEOffset (void) const {return m_WEOffset;} void SetBlockTypeMeta (int a_BlockX, int a_BlockY, int a_BlockZ, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta); void SetRelBlockTypeMeta(int a_RelX, int a_RelY, int a_RelZ, BLOCKTYPE a_BlockType, NIBBLETYPE a_BlockMeta); @@ -299,6 +302,10 @@ protected: int m_SizeY; int m_SizeZ; + /** An extra data value sometimes stored in the .schematic file. Used mainly by the WorldEdit plugin. + cBlockArea doesn't use this value in any way. */ + Vector3i m_WEOffset; + BLOCKTYPE * m_BlockTypes; NIBBLETYPE * m_BlockMetas; // Each meta is stored as a separate byte for faster access NIBBLETYPE * m_BlockLight; // Each light value is stored as a separate byte for faster access diff --git a/src/Entities/ProjectileEntity.cpp b/src/Entities/ProjectileEntity.cpp index 12d2025ec..f4ab825f2 100644 --- a/src/Entities/ProjectileEntity.cpp +++ b/src/Entities/ProjectileEntity.cpp @@ -663,8 +663,6 @@ cThrownSnowballEntity::cThrownSnowballEntity(cEntity * a_Creator, double a_X, do void cThrownSnowballEntity::OnHitSolidBlock(const Vector3d & a_HitPos, eBlockFace a_HitFace) { - // TODO: Apply damage to certain mobs (blaze etc.) and anger all mobs - Destroy(); } @@ -672,6 +670,30 @@ void cThrownSnowballEntity::OnHitSolidBlock(const Vector3d & a_HitPos, eBlockFac +void cThrownSnowballEntity::OnHitEntity(cEntity & a_EntityHit, const Vector3d & a_HitPos) +{ + int TotalDamage = 0; + if (a_EntityHit.IsMob()) + { + cMonster::eType MobType = ((cMonster &) a_EntityHit).GetMobType(); + if (MobType == cMonster::mtBlaze) + { + TotalDamage = 3; + } + else if (MobType == cMonster::mtEnderDragon) + { + TotalDamage = 1; + } + } + a_EntityHit.TakeDamage(dtRangedAttack, this, TotalDamage, 1); + + Destroy(true); +} + + + + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // cBottleOEnchantingEntity : diff --git a/src/Entities/ProjectileEntity.h b/src/Entities/ProjectileEntity.h index fac592d16..efb7ae783 100644 --- a/src/Entities/ProjectileEntity.h +++ b/src/Entities/ProjectileEntity.h @@ -259,6 +259,7 @@ protected: // cProjectileEntity overrides: virtual void OnHitSolidBlock(const Vector3d & a_HitPos, eBlockFace a_HitFace) override; + virtual void OnHitEntity (cEntity & a_EntityHit, const Vector3d & a_HitPos) override; // tolua_begin diff --git a/src/Generating/PieceGenerator.cpp b/src/Generating/PieceGenerator.cpp index e3de5b951..cf5ab6226 100644 --- a/src/Generating/PieceGenerator.cpp +++ b/src/Generating/PieceGenerator.cpp @@ -377,7 +377,7 @@ bool cPieceGenerator::TryPlacePieceAtConnector( // You need DirectionRotationTable[rot1][rot2] CCW turns to connect rot1 to rot2 (they are opposite) static const int DirectionRotationTable[6][6] = { - /* YM, YP, ZM, ZP, XM, XP + /* YM, YP, ZM, ZP, XM, XP */ /* YM */ { 0, 0, 0, 0, 0, 0}, /* YP */ { 0, 0, 0, 0, 0, 0}, /* ZM */ { 0, 0, 2, 0, 1, 3}, diff --git a/src/WebAdmin.cpp b/src/WebAdmin.cpp index e88de5947..402cd3035 100644 --- a/src/WebAdmin.cpp +++ b/src/WebAdmin.cpp @@ -127,6 +127,7 @@ bool cWebAdmin::Start(void) // Initialize the WebAdmin template script and load the file m_TemplateScript.Create(); + m_TemplateScript.RegisterAPILibs(); if (!m_TemplateScript.LoadFile(FILE_IO_PREFIX "webadmin/template.lua")) { LOGWARN("Could not load WebAdmin template \"%s\", using default template.", FILE_IO_PREFIX "webadmin/template.lua"); diff --git a/src/WorldStorage/SchematicFileSerializer.cpp b/src/WorldStorage/SchematicFileSerializer.cpp index b021aeb0c..ef67fdb13 100644 --- a/src/WorldStorage/SchematicFileSerializer.cpp +++ b/src/WorldStorage/SchematicFileSerializer.cpp @@ -177,6 +177,25 @@ bool cSchematicFileSerializer::LoadFromSchematicNBT(cBlockArea & a_BlockArea, cP a_BlockArea.Clear(); a_BlockArea.SetSize(SizeX, SizeY, SizeZ, AreMetasPresent ? (cBlockArea::baTypes | cBlockArea::baMetas) : cBlockArea::baTypes); + int TOffsetX = a_NBT.FindChildByName(a_NBT.GetRoot(), "WEOffsetX"); + int TOffsetY = a_NBT.FindChildByName(a_NBT.GetRoot(), "WEOffsetY"); + int TOffsetZ = a_NBT.FindChildByName(a_NBT.GetRoot(), "WEOffsetZ"); + + if ( + (TOffsetX < 0) || (TOffsetY < 0) || (TOffsetZ < 0) || + (a_NBT.GetType(TOffsetX) != TAG_Int) || + (a_NBT.GetType(TOffsetY) != TAG_Int) || + (a_NBT.GetType(TOffsetZ) != TAG_Int) + ) + { + // Not every schematic file has an offset, so we shoudn't give a warn message. + a_BlockArea.SetWEOffset(0, 0, 0); + } + else + { + a_BlockArea.SetWEOffset(a_NBT.GetInt(TOffsetX), a_NBT.GetInt(TOffsetY), a_NBT.GetInt(TOffsetZ)); + } + // Copy the block types and metas: int NumBytes = a_BlockArea.m_SizeX * a_BlockArea.m_SizeY * a_BlockArea.m_SizeZ; if (a_NBT.GetDataLength(TBlockTypes) < NumBytes) @@ -234,6 +253,10 @@ AString cSchematicFileSerializer::SaveToSchematicNBT(const cBlockArea & a_BlockA Writer.AddByteArray("Data", Dummy.data(), Dummy.size()); } + Writer.AddInt("WEOffsetX", a_BlockArea.m_WEOffset.x); + Writer.AddInt("WEOffsetY", a_BlockArea.m_WEOffset.y); + Writer.AddInt("WEOffsetZ", a_BlockArea.m_WEOffset.z); + // TODO: Save entities and block entities Writer.BeginList("Entities", TAG_Compound); Writer.EndList(); |