diff options
| -rw-r--r-- | _ont/luna-sdk-userful-commands.md | 50 | ||||
| -rw-r--r-- | _ont/ont-carlitoxxpro-cpgos03-0490-v2.md | 39 | ||||
| -rw-r--r-- | _ont/ont-leox-lxt-010g-d.md | 2 | ||||
| -rw-r--r-- | _ont/ont-leox-lxt-010h-d.md | 2 | ||||
| -rw-r--r-- | _ont/ont-leox-lxt-010s-h.md | 20 | ||||
| -rw-r--r-- | _ont/ont-leox-userful-command.md | 25 | ||||
| -rw-r--r-- | _ont/ont-luna-sdk-useful-commands.md | 195 | ||||
| -rw-r--r-- | _ont/ont-odi-realtek-dfp-34g-2c2.md | 50 | ||||
| -rw-r--r-- | _ont/ont-odi-realtek-dfp-34x-2c2.md | 47 | ||||
| -rw-r--r-- | _ont/ont-t-w-twcgpon657.md | 6 | ||||
| -rw-r--r-- | _ont/ont-technicolor-afm0002.md | 18 | ||||
| -rw-r--r-- | _ont/ont-technicolor-afm0003.md | 53 | ||||
| -rw-r--r-- | _ont/ont-ufiber-uf-instant.md | 2 | ||||
| -rw-r--r-- | _ont/ont-vsol-v2801f.md | 4 |
14 files changed, 282 insertions, 231 deletions
diff --git a/_ont/luna-sdk-userful-commands.md b/_ont/luna-sdk-userful-commands.md deleted file mode 100644 index ee899d1..0000000 --- a/_ont/luna-sdk-userful-commands.md +++ /dev/null @@ -1,50 +0,0 @@ -# General Settings and Useful Commands - -## Getting/Setting the ONT's S/N -```sh -# {{ include.flash }} get GPON_SN -GPON_SN=TMBB00000000 -# {{ include.flash }} set GPON_SN TMBB0A1B2C3D -``` - -## Getting/Setting the ONT's PLOAM password -{% if include.ploam == 'hex' %} - -{% include alert.html content="The PLOAM password is stored in HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} - -```sh -# {{ include.flash }} get GPON_PLOAM_PASSWD -GPON_PLOAM_PASSWD=41414141414141414141 -# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141 -``` -{% elsif include.ploam == 'ascii' %} - -{% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %} - -```sh -# {{ include.flash }} get GPON_PLOAM_PASSWD -GPON_PLOAM_PASSWD=AAAAAAAAAA -# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA -``` -{% endif %} - -## Checking the currently active image -```sh -# nv getenv sw_active -sw_active=1 -# nv getenv sw_version0 -sw_version0=V1_7_8_210412 -# nv getenv sw_version1 -sw_version1=V1_7_8_210412 -``` - -## Booting to a different image -```sh -# nv setenv sw_commit 0|1 -# reboot -``` - -## Querying a particular OMCI ME -```sh -# omcicli mib get MIB_IDX -```
\ No newline at end of file diff --git a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md index 6c2a4e0..2f10493 100644 --- a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md +++ b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md @@ -7,31 +7,34 @@ parent: CarlitoxxPro # Hardware Specifications -| | | -| ------------ | ----------------- | -| Vendor/Brand | CarlitoxxPro | -| Model | CPGOS03-0490 v2 | -| Chipset | Realtek RTL9601CI | -| Flash | 8 MB | -| RAM | 64 MB | -| System | Linux (Luna SDK) | -| HSGMII | No | -| Optics | SC/APC | -| IP address | | -| Web Gui | ✅ | -| SSH | ✅ | -| Telnet | | -| Serial | | -| Form Factor | miniONT SFP | +| | | +| ------------ | ------------------------------------- | +| Vendor/Brand | CarlitoxxPro | +| Model | CPGOS03-0490 v2 | +| Chipset | Realtek RTL9601CI | +| Flash | 8 MB | +| RAM | 64 MB | +| System | Linux (Luna SDK) | +| HSGMII | No | +| Optics | SC/APC | +| IP address | | +| Web Gui | ✅ user `cpAdmin`, password `cpAdmin` | +| SSH | | +| Telnet | ✅ | +| Serial | | +| Form Factor | miniONT SFP | # Known Bugs - VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII -- You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE +- You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE + +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='asciiAndHex' %} + # Miscellaneous Links - [Hacking RTL960x](https://github.com/Anime4000/RTL960x) - +- [GPON ONU SFP - CPGOS03-0490 v2.0: Configuration Manual 1.0](https://wiki.rockstable.it/FTTH?action=AttachFile&do=get&target=CPGOS03-0490v2_Configuration-Manual.pdf) diff --git a/_ont/ont-leox-lxt-010g-d.md b/_ont/ont-leox-lxt-010g-d.md index f01afd6..02da189 100644 --- a/_ont/ont-leox-lxt-010g-d.md +++ b/_ont/ont-leox-lxt-010g-d.md @@ -30,4 +30,4 @@ parent: LEOX The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. -{% include_relative ont-leox-userful-command.md %} +{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' %} diff --git a/_ont/ont-leox-lxt-010h-d.md b/_ont/ont-leox-lxt-010h-d.md index 0dc0892..90a29f7 100644 --- a/_ont/ont-leox-lxt-010h-d.md +++ b/_ont/ont-leox-lxt-010h-d.md @@ -31,4 +31,4 @@ parent: LEOX The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. -{% include_relative ont-leox-userful-command.md %} +{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' %} diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md index 84db6c8..dd0f632 100644 --- a/_ont/ont-leox-lxt-010s-h.md +++ b/_ont/ont-leox-lxt-010s-h.md @@ -67,25 +67,7 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a - V3.3.4L3 - V3.3.4L4rc1 (Fix 2.5GbE HiSGMII) -{% include_relative ont-leox-userful-command.md %} - -## LAN SDS Mode (with firmware V3.3.4L4rc1): - -| mode | description | -| ---------------- | ------------------------ | -| LAN_SDS_MODE = 1 | 1GbE with auto-neg on | -| LAN_SDS_MODE = 7 | 1GbE with auto-neg off | -| LAN_SDS_MODE = 8 | 2.5GbE with auto-neg off | - -If you try to use any mode not listed here, stick will default to mode 1. - -To change the link mode use this command: - -```sh -# /etc/scripts/flash get LAN_SDS_MODE -LAN_SDS_MODE=1 -# /etc/scripts/flash set LAN_SDS_MODE 1 -``` +{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' %} # Known Bugs diff --git a/_ont/ont-leox-userful-command.md b/_ont/ont-leox-userful-command.md deleted file mode 100644 index 1900b23..0000000 --- a/_ont/ont-leox-userful-command.md +++ /dev/null @@ -1,25 +0,0 @@ -# General Settings and Useful Commands - -## Change IP address -```sh -# /etc/scripts/flash get LAN_IP_ADDR -LAN_IP_ADDR=192.168.2.1 -# /etc/scripts/flash set LAN_IP_ADDR 192.168.1.1 - ``` - -## Getting/Setting the ONT's S/N -```sh -# /etc/scripts/flash get GPON_SN -GPON_SN=LEOX00000000 -# /etc/scripts/flash set GPON_SN TMBB0A1B2C3D -``` - -## Getting/Setting the ONT's PLOAM password - -{% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %} - -```sh -# /etc/scripts/flash get GPON_PLOAM_PASSWD -GPON_PLOAM_PASSWD=AAAAAAAAAA -# /etc/scripts/flash set GPON_PLOAM_PASSWD AAAAAAAAAA -```
\ No newline at end of file diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md new file mode 100644 index 0000000..535d62a --- /dev/null +++ b/_ont/ont-luna-sdk-useful-commands.md @@ -0,0 +1,195 @@ +# General Settings and Useful Commands + +## Useful files +- `/var/config/lastgood.xml` - Contains the user portion of the configuration +{% if include.lastgoodHs %} +- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) +{% endif %} +- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) + +## Useful binaries +- `{{ include.flash }}` - Used to manipulate the config files in a somewhat safe manner +- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `{{ include.flash }}` +- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` +- `omcicli` - Used to interact with the running OMCI daemon +- `omci_app` - The OMCI daemon +- `diag` - Used to run low-level diagnostics commands on the stick + + +## Getting/Setting the ONT's S/N +```sh +# {{ include.flash }} get GPON_SN +GPON_SN=TMBB00000000 +# {{ include.flash }} set GPON_SN TMBB0A1B2C3D +``` + +## Getting/Setting the ONT's PLOAM password +{% if include.ploam == 'asciiAndHex' %} + +{% include alert.html content="The ploam can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141 +``` + +{% elsif include.ploam == 'hex' %} + +{% include alert.html content="The PLOAM password is stored in HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=41414141414141414141 +# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141 +``` +{% elsif include.ploam == 'ascii' %} + +{% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA +``` +{% endif %} + +## Checking the currently active image +```sh +# nv getenv sw_active +sw_active=1 +# nv getenv sw_version0 +sw_version0=V1_7_8_210412 +# nv getenv sw_version1 +sw_version1=V1_7_8_210412 +``` + +## Booting to a different image +```sh +# nv setenv sw_commit 0|1 +# reboot +``` + +## Getting/Setting the ONT Vendor ID + +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# flash get PON_VENDOR_ID +PON_VENDOR_ID=ZTEG +# flash set PON_VENDOR_ID HWTC +``` + +## Getting/Settng the ONT Custom software version +{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the OMCI_OLT_MODE value to be set to 3" %} +{% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %} + +```sh +# nv setenv sw_custom_version0 YOURFIRSTSWVER +# nv setenv sw_custom_version1 YOURSECONDSWVER +``` + +## Getting/Setting a custom HW Version +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get HW_HWVER +HW_HWVER=V2.0 +# {{ include.flash }} set HW_HWVER MYHWVERSION +``` + +## Getting/Setting a custom ONT Equipment ID +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_ONU_MODEL +GPON_ONU_MODEL=DFP-34X-2C2 +# {{ include.flash }} set GPON_ONU_MODEL DFP-34X-XXX +``` + +## Getting/Setting OMCI OLT Mode and Fake OMCI + +Configure how ONT Stick handle OMCI from OLT: + +```sh +# {{ include.flash }} get OMCI_OLT_MODE +OMCI_OLT_MODE=1 +# {{ include.flash }} set OMCI_OLT_MODE 2 +``` + +| Value | Note | OMCI Information | +| ----- | --------------- | ---------------------------------------------- | +| 0 | Default Mode | Stock, some value are cannot be change | +| 1 | Huawei OLT Mode | Huawei MA5671a | +| 2 | ZTE OLT Mode | ZTE | +| 3 | Customized Mode | Custom Software/Hardware Version, OMCC, etc... | + +Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or proprietary OMCI that ONT Stick cant not understand, this will make ONT Stick reply OK whatever OMCI OLT throw at. + +`0` = Disable, `1` = Enable, Default is 0 + +```sh +# {{ include.flash }} get OMCI_FAKE_OK +OMCI_FAKE_OK=0 +# {{ include.flash }} set OMCI_FAKE_OK 1 +``` +{% if include.speedLan %} + +## Getting/Setting Speed LAN Mode +{% assign customSpeedLanAlert = include.customSpeedLanAlert | default: "Before editing the speed make sure your hardware supports it." %} +{% include alert.html content=customSpeedLanAlert alert="Note" icon="svg-info" color="blue" %} + +To change the link mode use this command: + +```sh +# {{ include.flash }} get LAN_SDS_MODE +LAN_SDS_MODE=0 +# {{ include.flash }} set LAN_SDS_MODE 1 +``` + +| Value | `cat /proc/kmsg` | Mode | Behavior | +| ----- | ------------------------------------ | -------- | --------------------------- |{% if include.speedLan contains '0' %} +| 0 | `<4>change mode to 0(GE/FE PHY)` | `TP` | 1GbaseT/100baseT |{% endif %}{% if include.speedLan contains '1' %} +| 1 | `<4>change mode to 1(Fiber 1G)` | `FIBER` | 1GbaseX with auto-neg on |{% endif %}{% if include.speedLan contains '2' %} +| 2 | `<4>change mode to 2(SGMII PHY)` | `TP MII` | 1Gb PHY |{% endif %}{% if include.speedLan contains '3' %} +| 3 | `<4>change mode to 3(SGMII MAC)` | `MII` | 1Gb MAC |{% endif %}{% if include.speedLan contains '4' %} +| 4 | `<4>change mode to 4(HiSGMII PHY)` | `TP MII` | 2.5Gb PHY |{% endif %}{% if include.speedLan contains '5' %} +| 5 | `<4>change mode to 5(HiSGMII MAC)` | `MII` | 2.5Gb MAC |{% endif %}{% if include.speedLan contains '6' %} +| 6 | `<4>change mode to 6(2500BaseX)` | `FIBER` | 2500baseX with auto-neg on |{% endif %}{% if include.speedLan contains '7' %} +| 7 | `<4>change mode to 7(SGMII Force)` | `TP` | 1GbaseT with auto-neg off |{% endif %}{% if include.speedLan contains '8' %} +| 8 | `<4>change mode to 8(HISGMII Force)` | `TP` | 2500baseT with auto-neg off |{% endif %} + +{% endif %} + +## Change IP address + +```sh +# {{ flash }} get LAN_IP_ADDR +LAN_IP_ADDR=192.168.2.1 +# {{ flash }} set LAN_IP_ADDR 192.168.1.1 +``` + +## Checking whether the connection with the OLT was successful (O5 state) + +```sh +diag gpon get onu-state +``` + +## Querying a particular OMCI ME +```sh +# omcicli mib get MIB_IDX +``` + +## Getting/Setting the L2 Bridge MTU +{% include alert.html content="Settings given via diag are not permanent after reboot" alert="Note" icon="svg-info" color="blue" %} + +Getting/Setting the MTU of the L2 bridge +```sh +# diag switch get max-pkt-len port all +Port Speed +---------- +0 1538 +2 2031 +# diag switch set max-pkt-len port all length 2000 +```
\ No newline at end of file diff --git a/_ont/ont-odi-realtek-dfp-34g-2c2.md b/_ont/ont-odi-realtek-dfp-34g-2c2.md index f58def1..a3878ef 100644 --- a/_ont/ont-odi-realtek-dfp-34g-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34g-2c2.md @@ -33,16 +33,18 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16 {% include image.html file="realtek-dfp-34g-2c2.jpg" alt="ODI Realtek DFP-34X-C2C" caption="ODI Realtek DFP-34X-C2C" %} - ## List of software versions -- V1.0-220530 -- V1.0-220414 +- V1.0-220923 (hybrid by @lanseyujie and @stick86) +- V1.0-220817 +- V1.0-220530 (hybrid by @stick86) +- V1.0-220414 (vlan working) - V1.0-220304 +- V1.0-210702 ## List of firmwares and files -- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/V2801F) +- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/DFP-34X-2C2) -The reccomended version are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar` because it has working VLAN translation. +The reccomended version are `M114_sfp_ODI_Vlan_220414.tar`, `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar` because it has working VLAN translation. ## List of partitions @@ -76,43 +78,7 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative luna-sdk-userful-commands.md flash='flash' flash='flash' ploam='hex' %} - -## Getting/Setting the ONT Vendor ID - -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get PON_VENDOR_ID -PON_VENDOR_ID=ZTEG -# flash set PON_VENDOR_ID HWTC -``` - -## Getting/Settng the ONT Custom software version -{% include alert.html content="This needs the OMCI_OLT_MODE value to be set to 3 and firmware 220530 as modded by stich86" alert="Note" icon="svg-info" color="blue" %} - -```sh -# nv setenv sw_custom_version0 YOURFIRSTSWVER -# nv setenv sw_custom_version1 YOURSECONDSWVER -``` - -## Getting/Setting a custom HW Version -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get HW_HWVER -HW_HWVER=V2.0 -# flash set HW_HWVER MYHWVERSION -``` - -## Getting/Setting a custom ONT Equipment ID -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get GPON_ONU_MODEL -GPON_ONU_MODEL=DFP-34X-2C2 -# flash set GPON_ONU_MODEL DFP-34X-XXX -``` +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86' speedLan='1234567' %} # Known Bugs diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md index f20cfc5..d1e1f46 100644 --- a/_ont/ont-odi-realtek-dfp-34x-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md @@ -35,12 +35,15 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16 ## List of software versions -- V1.0-220530 -- V1.0-220414 +- V1.0-220923 (hybrid by @lanseyujie and @stick86) +- V1.0-220817 +- V1.0-220530 (hybrid by @stick86) +- V1.0-220414 (vlan working) - V1.0-220304 +- V1.0-210702 ## List of firmwares and files -- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/V2801F) +- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/DFP-34X-2C2) The reccomended version are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar` because it has working VLAN translation. @@ -76,43 +79,7 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative luna-sdk-userful-commands.md flash='flash' ploam='hex' %} - -## Getting/Setting the ONT Vendor ID - -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get PON_VENDOR_ID -PON_VENDOR_ID=ZTEG -# flash set PON_VENDOR_ID HWTC -``` - -## Getting/Settng the ONT Custom software version -{% include alert.html content="This needs the OMCI_OLT_MODE value to be set to 3 and firmware 220530 as modded by stich86" alert="Note" icon="svg-info" color="blue" %} - -```sh -# nv setenv sw_custom_version0 YOURFIRSTSWVER -# nv setenv sw_custom_version1 YOURSECONDSWVER -``` - -## Getting/Setting a custom HW Version -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get HW_HWVER -HW_HWVER=V2.0 -# flash set HW_HWVER MYHWVERSION -``` - -## Getting/Setting a custom ONT Equipment ID -{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} - -```sh -# flash get GPON_ONU_MODEL -GPON_ONU_MODEL=DFP-34X-2C2 -# flash set GPON_ONU_MODEL DFP-34X-XXX -``` +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86' speedLan='1234567' %} # Known Bugs diff --git a/_ont/ont-t-w-twcgpon657.md b/_ont/ont-t-w-twcgpon657.md index d09bd01..a92287d 100644 --- a/_ont/ont-t-w-twcgpon657.md +++ b/_ont/ont-t-w-twcgpon657.md @@ -34,13 +34,15 @@ parent: T&W - [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/TWCGPON657) -The reccomended version are `C00R657V2801F_V1.9.0-220404.tar` because it is the V2801F for T&W TWC GPON657 +The reccomended version are `C00R657V2801F_V1.9.0-220404.tar` because it is the V2801F firmware for T&W TWC GPON657. + +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. Before editing the speed make sure your hardware supports it.' %} # Known Bugs VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII -You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE +You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE # Miscellaneous Links diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md index 41dde55..20612ab 100644 --- a/_ont/ont-technicolor-afm0002.md +++ b/_ont/ont-technicolor-afm0002.md @@ -82,21 +82,7 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one -# List of firmwares and files -## Useful files -- `/var/config/lastgood.xml` - Contains the user portion of the configuration -- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) -- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) - -## Useful binaries -- `/etc/scripts/flash` - Used to manipulate the config files in a somewhat safe manner -- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `flash` -- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` -- `omcicli` - Used to interact with the running OMCI daemon -- `omci_app` - The OMCI daemon -- `diag` - Used to run low-level diagnostics commands on the stick - -{% include_relative luna-sdk-userful-commands.md flash='/etc/scripts/flash' ploam='ascii' %} +{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' lastgoodHs=true %} ## Enabling the Web UI ```sh @@ -109,7 +95,7 @@ From the stick to the PC: ```sh # ssh admin@192.168.2.1 "cat /tmp/omcilog" > omcilog.log ``` -From the PC to the stick +From the PC to the stick: ```sh # cat lastgood.xml | ssh admin@192.168.2.1 "cat > /var/config/lastgood.xml" ``` diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md index 30eedea..9fc88c7 100644 --- a/_ont/ont-technicolor-afm0003.md +++ b/_ont/ont-technicolor-afm0003.md @@ -70,27 +70,50 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one -# List of firmwares and files -## Useful files -- `/var/config/lastgood.xml` - Contains the user portion of the configuration -- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) -- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) - -## Useful binaries -- `/etc/scripts/flash` - Used to manipulate the config files in a somewhat safe manner -- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `flash` -- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` -- `omcicli` - Used to interact with the running OMCI daemon -- `omci_app` - The OMCI daemon -- `diag` - Used to run low-level diagnostics commands on the stick - -{% include_relative luna-sdk-userful-commands.md flash='/etc/scripts/flash' ploam='ascii' %} +{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' lastgoodHs=true %} ## Enabling the Web UI ```sh # /bin/iptables -D INPUT -p tcp --dport 80 -j DROP ``` +## Transfering files from/to the stick +Works with binary files too, just run md5sum on source and destination to make sure you are not corrupting anything... +From the stick to the PC: +```sh +# tftp <IP> +tftp> put <filename> <directory> +tftp> q +``` +From the PC to the stick: +```sh +# tftp <IP> +tftp> get <filename> +tftp> q +``` + +## Extracting and repacking the rootfs +{% include alert.html content="Make sure you run both commands as root, otherwise you might get a damaged rootfs image" alert="Warning" icon="svg-warning" color="red" %} + +```sh +# unsquashfs mtd5.bin +# mksquashfs squashfs-root rootfs -b 131072 -comp lzma -no-recovery +``` +## Flashing a new rootfs + +{% include alert.html content="Only the inactive image can be flashed, change sw_versionX and sw_commit X based on the bank you have flashed" alert="Info" icon="svg-info" color="blue" %} + +So mtd4/5 if you are on image1, mtd6/7 if you are on image0. + +The following commands are used to flash a new rootfs to image1 and then boot to it +```sh +# flash_eraseall /dev/mtd7 +# cat /tmp/rootfs.new > /dev/mtd7 +# nv setenv sw_version1 NEW_SOFTWARE_VERSION +# nv setenv sw_commit 1 +# reboot +``` + # Miscellaneous Links - [omcilog2pcap](https://github.com/hack-gpon/omcilog2pcap) diff --git a/_ont/ont-ufiber-uf-instant.md b/_ont/ont-ufiber-uf-instant.md index edbebaa..1b3a79b 100644 --- a/_ont/ont-ufiber-uf-instant.md +++ b/_ont/ont-ufiber-uf-instant.md @@ -51,7 +51,7 @@ parent: UFiber VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII -You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE +You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE # Miscellaneous Links diff --git a/_ont/ont-vsol-v2801f.md b/_ont/ont-vsol-v2801f.md index 874c49a..fdc2b60 100644 --- a/_ont/ont-vsol-v2801f.md +++ b/_ont/ont-vsol-v2801f.md @@ -35,11 +35,13 @@ parent: VSOL The reccomended version are `V2801F_V1.9.0-220425.tar` because it has Modern WebGUI, 2.5GbE, patched `runlansds.sh`, `tftpd`, ... +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `V2801F_V1.9.0-220425.tar`. Before editing the speed make sure your hardware supports it.' %} + # Known Bugs VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII -You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE +You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE # Miscellaneous Links |