From 2dc686667782793c0e8cb2ccde043018f485de9d Mon Sep 17 00:00:00 2001 From: Luca <61296376+beastlukas@users.noreply.github.com> Date: Thu, 25 Aug 2022 11:29:47 +0200 Subject: Update ont-zyxel-pmg3000-d20b.md - added/fixed web gui credentials - fixed some urls - fixed ploam password commands - added 'Reset Web Gui admin credentials' section --- _ont/ont-zyxel-pmg3000-d20b.md | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to '_ont') diff --git a/_ont/ont-zyxel-pmg3000-d20b.md b/_ont/ont-zyxel-pmg3000-d20b.md index eddcf6a..38d275c 100644 --- a/_ont/ont-zyxel-pmg3000-d20b.md +++ b/_ont/ont-zyxel-pmg3000-d20b.md @@ -18,8 +18,8 @@ layout: default | HSGMII | Yes | | Optics | SC/APC | | IP address | 10.10.1.1 | -| Web Gui | ✅ username `admin`, password `admin` or `1234` | -| SSH | ✅ username `admin`, password `admin` or `1234` | +| Web Gui | ✅ username `admin` or `guest`, password `1234` or `guest` | +| SSH | ✅ username `admin`, password `admin` | | Form Factor | miniONT SFP | {% include image.html file="pmg3000-d20b.png" alt="PMG3000-D20B" caption="PMG3000-D20B" %} @@ -30,11 +30,11 @@ From the zyxel shell you can move to a standard linux shell via the `linuxshell` ## Firmware is interchangeable with: -- [Zyxel PMG3000-D20B](/ont-Zyxel-PMG3000-D20B) -- [Halny HL-GSFP](/ont-Halny-HL-GSFP) -- [D-LINK DPN-100-Rev-A2](/ont-D-LINK-DPN-100-Rev-A2) +- [Zyxel PMG3000-D20B](/ont-zyxel-pmg3000-d20b) +- [Halny HL-GSFP](/ont-halny-hl-gsfp) +- [D-LINK DPN-100-Rev-A2](/ont-d-link-dpn-100-rev-a2) - [Ziza OP151s](/ont-ziza-op151s) -- [T&W TW2362H-CDEL](/ont-T-W-TW2362H-CDEL) +- [T&W TW2362H-CDEL](/ont-t-w-tw2362h-cdel) # List of software versions @@ -76,7 +76,7 @@ set sn ALCLf0f0f0f0 {% include alert.html content="the PLOAM is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %} This can be done easily via web ui. If you prefer to do it via the shell use: ```sh -manufactory +hal set password PLOAMPASS ``` @@ -151,6 +151,11 @@ system reboot ``` +# Reset Web Gui admin credentials + +Sometimes, under certain circumstances, the Web Gui admin credentials might get changed from the default `admin`/`1234` combination. +To restore the default combination you can try following [this method](https://github.com/xvzf/zyxel-gpon-sfp/issues/6#issuecomment-1065864650). + # Known Bugs - [Not working with Broadcom BCM57810S](https://github.com/xvzf/zyxel-gpon-sfp/issues/10) - Issue on IPv6 discovery. But we are not sure if is a edge case of a particular ISP or not -- cgit v1.2.3