From d9ca1535d90d39a843806bf374e9e686bd6694b8 Mon Sep 17 00:00:00 2001
From: krakenrf <78108016+krakenrf@users.noreply.github.com>
Date: Fri, 7 Oct 2022 17:40:08 +1300
Subject: Updated 12. Appendix (markdown)

---
 12.-Appendix.md | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/12.-Appendix.md b/12.-Appendix.md
index 98d7ca3..716dd87 100644
--- a/12.-Appendix.md
+++ b/12.-Appendix.md
@@ -69,13 +69,15 @@ It is up to you the programmer to ensure that the inputs are valid. Entering inc
 * Intel i5, i7 on Ubuntu
 * Dell Wyse Thin Clients
 * Orange Pi 4 - Note: The OPI4 is sensitive to USB cables. Needs a short high quality USB data cable. Will not work with long and/or poor quality USB data cables.
-* Odroid N2/+ - Note: You must use the BOTTOM USB port that is closest to the DC power barrel jack. All other USB ports do not work. Also requires a high quality USB cable.
 
 ### Virtualization
 
 * Virtual Box Ubuntu VM
 * Docker with ClearLinux
 
+## Working but with major quirks
+* Odroid N2/+ - Note: You must use the BOTTOM USB port that is closest to the DC power barrel jack. All other USB ports do not work. Also requires a high quality USB cable. Also as this device does not have built in WiFi it relies on Ethernet or a USB WiFi stick. When using a USB WiFi stick there will be sample alignment glitches every now and then (we count about one USB glitch every hour). This results in the DOA/PR results going bad. If you have periodic recalibration turned ON (the default), it's not a huge deal, but you could be about 5 minutes with bad results.
+
 ## Not Working
 * Tinkerboard - Unfortunately pure 32-bit CPUs are not supported by Miniforge Conda.
 
-- 
cgit v1.2.3