From 2e73f1aec042986fae435d68cacafcba8b8ec49f Mon Sep 17 00:00:00 2001 From: martinbra Date: Thu, 30 Jul 2020 00:21:11 -0300 Subject: Fixing some minor typos (continous, maxium and paramater). Keeping "typoed" ADS1115_CONTINOUS enum value for backward compatibilities. --- examples/Alert_Window_Mode/Alert_Window_Mode.ino | 10 +++++----- .../Alert_Window_Mode_with_Latch.ino | 8 ++++---- examples/Single_Shot/Single_Shot.ino | 10 +++++----- .../Single_Shot_Conv_Ready_Alert_Controlled.ino | 8 ++++---- .../Single_Shot_Conv_Ready_Controlled.ino | 10 +++++----- src/ADS1115_WE.h | 11 ++++++----- 6 files changed, 29 insertions(+), 28 deletions(-) diff --git a/examples/Alert_Window_Mode/Alert_Window_Mode.ino b/examples/Alert_Window_Mode/Alert_Window_Mode.ino index 3be5dec..a68b684 100644 --- a/examples/Alert_Window_Mode/Alert_Window_Mode.ino +++ b/examples/Alert_Window_Mode/Alert_Window_Mode.ino @@ -81,14 +81,14 @@ void setup() { */ //adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode - * ADS1115_SINGLE -> single shot mode (default) + * ADS1115_CONTINUOUS -> continuous mode + * ADS1115_SINGLE -> single shot mode (default) */ - adc.setMeasureMode(ADS1115_CONTINOUS); //comment or change you want to change to single shot + adc.setMeasureMode(ADS1115_CONTINUOUS); //comment or change you want to change to single shot - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated diff --git a/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino b/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino index 049a65f..f90d6db 100644 --- a/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino +++ b/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino @@ -83,14 +83,14 @@ void setup() { */ //adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode + * ADS1115_CONTINUOUS -> continuous mode * ADS1115_SINGLE -> single shot mode (default) */ - adc.setMeasureMode(ADS1115_CONTINOUS); //comment or change if you want to change single shot + adc.setMeasureMode(ADS1115_CONTINUOUS); //comment or change if you want to change single shot - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated diff --git a/examples/Single_Shot/Single_Shot.ino b/examples/Single_Shot/Single_Shot.ino index 8a5a198..3b583b2 100644 --- a/examples/Single_Shot/Single_Shot.ino +++ b/examples/Single_Shot/Single_Shot.ino @@ -32,7 +32,7 @@ void setup() { * ADS1115_RANGE_0512 -> +/- 512 mV * ADS1115_RANGE_0256 -> +/- 256 mV */ - adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change paramater to change range + adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range /* Set the inputs to be compared * @@ -71,14 +71,14 @@ void setup() { */ //adc.setConvRate(ADS1115_128_SPS); //uncomment if you want to change the default - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode + * ADS1115_CONTINUOUS -> continuous mode * ADS1115_SINGLE -> single shot mode (default) */ - //adc.setMeasureMode(ADS1115_CONTINOUS); //uncomment if you want to change the default + //adc.setMeasureMode(ADS1115_CONTINUOUS); //uncomment if you want to change the default - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated (if diff --git a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino b/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino index a02067a..5822f01 100644 --- a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino +++ b/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino @@ -76,14 +76,14 @@ void setup() { */ adc.setConvRate(ADS1115_8_SPS); //comment line/change parameter to change SPS - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode + * ADS1115_CONTINUOUS -> continuous mode * ADS1115_SINGLE -> single shot mode (default) */ - //adc.setMeasureMode(ADS1115_CONTINOUS); // continous mode does not work with conversion ready + //adc.setMeasureMode(ADS1115_CONTINUOUS); // continuous mode does not work with conversion ready - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated (if diff --git a/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino b/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino index 976e682..9ca409e 100644 --- a/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino +++ b/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino @@ -2,7 +2,7 @@ * Example sketch for the ADS1115_WE library * * This sketch shows how you can use the conversion ready bit with the isBusy function. -* This does not work in the continous mode. +* This does not work in the continuous mode. * * Further information can be found on: * https://wolles-elektronikkiste.de/ads1115 @@ -72,14 +72,14 @@ void setup() { */ adc.setConvRate(ADS1115_8_SPS); //comment line/change parameter to change SPS - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode + * ADS1115_CONTINUOUS -> continuous mode * ADS1115_SINGLE -> single shot mode (default) */ - //adc.setMeasureMode(ADS1115_CONTINOUS); //continous mode does not work with conversion ready (isBusy) + //adc.setMeasureMode(ADS1115_CONTINUOUS); //continuous mode does not work with conversion ready (isBusy) - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated (if diff --git a/src/ADS1115_WE.h b/src/ADS1115_WE.h index c5a269a..c531368 100644 --- a/src/ADS1115_WE.h +++ b/src/ADS1115_WE.h @@ -70,8 +70,9 @@ typedef enum ADS1115_CONV_RATE{ } convRate; typedef enum ADS1115_MEASURE_MODE{ - ADS1115_CONTINOUS = 0x0000, - ADS1115_SINGLE = 0x0100 + ADS1115_CONTINOUS = 0x0000, // keeping misspelled enum for backwards compatibility. + ADS1115_CONTINUOUS = 0x0000, + ADS1115_SINGLE = 0x0100 } measureMode; typedef enum ADS1115_RANGE{ @@ -139,7 +140,7 @@ public: */ void setAlertPol(ADS1115_ALERT_POL polarity); - /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will + /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will * be active when measured values are beyond the maximum limit or outside the window * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) * In max limit mode the minimum value is the limit where the alert pin will be deactivated (if @@ -164,9 +165,9 @@ public: */ void setConvRate(ADS1115_CONV_RATE rate); - /* Set continous or single shot mode: + /* Set continuous or single shot mode: * - * ADS1115_CONTINOUS -> continous mode + * ADS1115_CONTINUOUS -> continuous mode * ADS1115_SINGLE -> single shot mode (default) */ void setMeasureMode(ADS1115_MEASURE_MODE mode); -- cgit v1.2.3