/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* update_verifier verifies the integrity of the partitions after an A/B OTA update. It gets invoked
* by init, and will only perform the verification if it's the first boot post an A/B OTA update
* (https://source.android.com/devices/tech/ota/ab/#after_reboot).
*
* update_verifier relies on device-mapper-verity (dm-verity) to capture any corruption on the
* partitions being verified (https://source.android.com/security/verifiedboot). The verification
* will be skipped, if dm-verity is not enabled on the device.
*
* Upon detecting verification failures, the device will be rebooted, although the trigger of the
* reboot depends on the dm-verity mode.
* enforcing mode: dm-verity reboots the device
* eio mode: dm-verity fails the read and update_verifier reboots the device
* other mode: not supported and update_verifier reboots the device
*
* All these reboots prevent the device from booting into a known corrupt state. If the device
* continuously fails to boot into the new slot, the bootloader should mark the slot as unbootable
* and trigger a fallback to the old slot.
*
* The current slot will be marked as having booted successfully if the verifier reaches the end
* after the verification.
*/
#include "update_verifier/update_verifier.h"
#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <algorithm>
#include <future>
#include <thread>
#include <BootControlClient.h>
#include <android-base/chrono_utils.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <android/os/IVold.h>
#include <binder/BinderService.h>
#include <binder/Status.h>
#include <cutils/android_reboot.h>
#include "care_map.pb.h"
// TODO(xunchang) remove the prefix and use a default path instead.
constexpr const char* kDefaultCareMapPrefix = "/data/ota_package/care_map";
// Find directories in format of "/sys/block/dm-X".
static int dm_name_filter(const dirent* de) {
if (android::base::StartsWith(de->d_name, "dm-")) {
return 1;
}
return 0;
}
UpdateVerifier::UpdateVerifier()
: care_map_prefix_(kDefaultCareMapPrefix),
property_reader_([](const std::string& id) { return android::base::GetProperty(id, ""); }) {}
// Iterate the content of "/sys/block/dm-X/dm/name" and find all the dm-wrapped block devices.
// We will later read all the ("cared") blocks from "/dev/block/dm-X" to ensure the target
// partition's integrity.
std::map<std::string, std::string> UpdateVerifier::FindDmPartitions() {
static constexpr auto DM_PATH_PREFIX = "/sys/block/";
dirent** namelist = nullptr;
int n = scandir(DM_PATH_PREFIX, &namelist, dm_name_filter, alphasort);
if (n == -1) {
PLOG(ERROR) << "Failed to scan dir " << DM_PATH_PREFIX;
return {};
}
if (n == 0) {
LOG(ERROR) << "No dm block device found.";
return {};
}
static constexpr auto DM_PATH_SUFFIX = "/dm/name";
static constexpr auto DEV_PATH = "/dev/block/";
std::map<std::string, std::string> dm_block_devices;
while (n--) {
std::string path = DM_PATH_PREFIX + std::string(namelist[n]->d_name) + DM_PATH_SUFFIX;
std::string content;
if (!android::base::ReadFileToString(path, &content)) {
PLOG(WARNING) << "Failed to read " << path;
} else {
std::string dm_block_name = android::base::Trim(content);
// AVB is using 'vroot' for the root block device but we're expecting 'system'.
if (dm_block_name == "vroot") {
dm_block_name = "system";
} else if (android::base::EndsWith(dm_block_name, "-verity")) {
auto npos = dm_block_name.rfind("-verity");
dm_block_name = dm_block_name.substr(0, npos);
} else if (!android::base::GetProperty("ro.boot.avb_version", "").empty()) {
// Verified Boot 1.0 doesn't add a -verity suffix. On AVB 2 devices,
// if DAP is enabled, then a -verity suffix must be used to
// differentiate between dm-linear and dm-verity devices. If we get
// here, we're AVB 2 and looking at a non-verity partition.
continue;
}
dm_block_devices.emplace(dm_block_name, DEV_PATH + std::string(namelist[n]->d_name));
}
free(namelist[n]);
}
free(namelist);
return dm_block_devices;
}
bool UpdateVerifier::ReadBlocks(const std::string partition_name,
const std::string& dm_block_device, const RangeSet& ranges) {
// RangeSet::Split() splits the ranges into multiple groups with same number of blocks (except for
// the last group).
size_t thread_num = std::thread::hardware_concurrency() ?: 4;
std::vector<RangeSet> groups = ranges.Split(thread_num);
std::vector<std::future<bool>> threads;
for (const auto& group : groups) {
auto thread_func = [&group, &dm_block_device, &partition_name]() {
android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(dm_block_device.c_str(), O_RDONLY)));
if (fd.get() == -1) {
PLOG(ERROR) << "Error reading " << dm_block_device << " for partition " << partition_name;
return false;
}
static constexpr size_t kBlockSize = 4096;
std::vector<uint8_t> buf(1024 * kBlockSize);
size_t block_count = 0;
for (const auto& [range_start, range_end] : group) {
if (lseek64(fd.get(), static_cast<off64_t>(range_start) * kBlockSize, SEEK_SET) == -1) {
PLOG(ERROR) << "lseek to " << range_start << " failed";
return false;
}
size_t remain = (range_end - range_start) * kBlockSize;
while (remain > 0) {
size_t to_read = std::min(remain, 1024 * kBlockSize);
if (!android::base::ReadFully(fd.get(), buf.data(), to_read)) {
PLOG(ERROR) << "Failed to read blocks " << range_start << " to " << range_end;
return false;
}
remain -= to_read;
}
block_count += (range_end - range_start);
}
LOG(INFO) << "Finished reading " << block_count << " blocks on " << dm_block_device;
return true;
};
threads.emplace_back(std::async(std::launch::async, thread_func));
}
bool ret = true;
for (auto& t : threads) {
ret = t.get() && ret;
}
LOG(INFO) << "Finished reading blocks on " << dm_block_device << " with " << thread_num
<< " threads.";
return ret;
}
bool UpdateVerifier::CheckVerificationStatus() {
auto client =
android::snapshot::SnapuserdClient::Connect(android::snapshot::kSnapuserdSocket, 5s);
if (!client) {
LOG(ERROR) << "Unable to connect to snapuserd";
return false;
}
return client->QueryUpdateVerification();
}
bool UpdateVerifier::VerifyPartitions() {
const bool userspace_snapshots =
android::base::GetBoolProperty("ro.virtual_ab.userspace.snapshots.enabled", false);
if (userspace_snapshots && CheckVerificationStatus()) {
LOG(INFO) << "Partitions verified by snapuserd daemon";
return true;
}
LOG(INFO) << "Partitions not verified by snapuserd daemon";
auto dm_block_devices = FindDmPartitions();
if (dm_block_devices.empty()) {
LOG(ERROR) << "No dm-enabled block device is found.";
return false;
}
for (const auto& [partition_name, ranges] : partition_map_) {
if (dm_block_devices.find(partition_name) == dm_block_devices.end()) {
LOG(ERROR) << "Failed to find dm block device for " << partition_name;
return false;
}
if (!ReadBlocks(partition_name, dm_block_devices.at(partition_name), ranges)) {
return false;
}
}
return true;
}
bool UpdateVerifier::ParseCareMap() {
partition_map_.clear();
std::string care_map_name = care_map_prefix_ + ".pb";
if (access(care_map_name.c_str(), R_OK) == -1) {
LOG(ERROR) << care_map_name << " doesn't exist";
return false;
}
android::base::unique_fd care_map_fd(TEMP_FAILURE_RETRY(open(care_map_name.c_str(), O_RDONLY)));
// If the device is flashed before the current boot, it may not have care_map.txt in
// /data/ota_package. To allow the device to continue booting in this situation, we should
// print a warning and skip the block verification.
if (care_map_fd.get() == -1) {
PLOG(WARNING) << "Failed to open " << care_map_name;
return false;
}
std::string file_content;
if (!android::base::ReadFdToString(care_map_fd.get(), &file_content)) {
PLOG(WARNING) << "Failed to read " << care_map_name;
return false;
}
if (file_content.empty()) {
LOG(WARNING) << "Unexpected empty care map";
return false;
}
recovery_update_verifier::CareMap care_map;
if (!care_map.ParseFromString(file_content)) {
LOG(WARNING) << "Failed to parse " << care_map_name << " in protobuf format.";
return false;
}
for (const auto& partition : care_map.partitions()) {
if (partition.name().empty()) {
LOG(WARNING) << "Unexpected empty partition name.";
return false;
}
if (partition.ranges().empty()) {
LOG(WARNING) << "Unexpected block ranges for partition " << partition.name();
return false;
}
RangeSet ranges = RangeSet::Parse(partition.ranges());
if (!ranges) {
LOG(WARNING) << "Error parsing RangeSet string " << partition.ranges();
return false;
}
// Continues to check other partitions if there is a fingerprint mismatch.
if (partition.id().empty() || partition.id() == "unknown") {
LOG(WARNING) << "Skip reading partition " << partition.name()
<< ": property_id is not provided to get fingerprint.";
continue;
}
std::string fingerprint = property_reader_(partition.id());
if (fingerprint != partition.fingerprint()) {
LOG(WARNING) << "Skip reading partition " << partition.name() << ": fingerprint "
<< fingerprint << " doesn't match the expected value "
<< partition.fingerprint();
continue;
}
partition_map_.emplace(partition.name(), ranges);
}
if (partition_map_.empty()) {
LOG(WARNING) << "No partition to verify";
return false;
}
return true;
}
void UpdateVerifier::set_care_map_prefix(const std::string& prefix) {
care_map_prefix_ = prefix;
}
void UpdateVerifier::set_property_reader(
const std::function<std::string(const std::string&)>& property_reader) {
property_reader_ = property_reader;
}
static int reboot_device() {
if (android_reboot(ANDROID_RB_RESTART2, 0, nullptr) == -1) {
LOG(ERROR) << "Failed to reboot.";
return -1;
}
while (true) pause();
}
int update_verifier(int argc, char** argv) {
for (int i = 1; i < argc; i++) {
LOG(INFO) << "Started with arg " << i << ": " << argv[i];
}
const auto module = android::hal::BootControlClient::WaitForService();
if (module == nullptr) {
LOG(ERROR) << "Error getting bootctrl module.";
return reboot_device();
}
uint32_t current_slot = module->GetCurrentSlot();
const auto is_successful = module->IsSlotMarkedSuccessful(current_slot);
if (!is_successful.has_value()) {
LOG(INFO) << "Booting slot " << current_slot << " failed";
} else {
LOG(INFO) << "Booting slot " << current_slot
<< ": isSlotMarkedSuccessful=" << is_successful.value();
}
if (is_successful.has_value() && !is_successful.value()) {
// The current slot has not booted successfully.
bool skip_verification = false;
std::string verity_mode = android::base::GetProperty("ro.boot.veritymode", "");
if (verity_mode.empty()) {
// Skip the verification if ro.boot.veritymode property is not set. This could be a result
// that device doesn't support dm-verity, or has disabled that.
LOG(WARNING) << "dm-verity not enabled; marking without verification.";
skip_verification = true;
} else if (android::base::EqualsIgnoreCase(verity_mode, "eio")) {
// We shouldn't see verity in EIO mode if the current slot hasn't booted successfully before.
// Continue the verification until we fail to read some blocks.
LOG(WARNING) << "Found dm-verity in EIO mode.";
} else if (android::base::EqualsIgnoreCase(verity_mode, "disabled")) {
LOG(WARNING) << "dm-verity in disabled mode; marking without verification.";
skip_verification = true;
} else if (verity_mode != "enforcing") {
LOG(ERROR) << "Unexpected dm-verity mode: " << verity_mode << ", expecting enforcing.";
return reboot_device();
}
if (!skip_verification) {
UpdateVerifier verifier;
if (!verifier.ParseCareMap()) {
LOG(WARNING) << "Failed to parse the care map file, skipping verification";
} else if (!verifier.VerifyPartitions()) {
LOG(ERROR) << "Failed to verify all blocks in care map file.";
return reboot_device();
}
}
bool supports_checkpoint = false;
auto sm = android::defaultServiceManager();
android::sp<android::IBinder> binder = sm->getService(android::String16("vold"));
if (binder) {
auto vold = android::interface_cast<android::os::IVold>(binder);
android::binder::Status status = vold->supportsCheckpoint(&supports_checkpoint);
if (!status.isOk()) {
LOG(ERROR) << "Failed to check if checkpoints supported. Continuing";
}
} else {
LOG(ERROR) << "Failed to obtain vold Binder. Continuing";
}
if (!supports_checkpoint) {
const auto cr = module->MarkBootSuccessful();
if (!cr.success) {
LOG(ERROR) << "Error marking booted successfully: " << cr.errMsg;
return reboot_device();
}
LOG(INFO) << "Marked slot " << current_slot << " as booted successfully.";
// Clears the warm reset flag for next reboot.
if (!android::base::SetProperty("ota.warm_reset", "0")) {
LOG(WARNING) << "Failed to reset the warm reset flag";
}
} else {
LOG(INFO) << "Deferred marking slot " << current_slot << " as booted successfully.";
}
}
LOG(INFO) << "Leaving update_verifier.";
return 0;
}
