1 files changed, 0 insertions, 527 deletions

diff --git a/libjpegtwrp/jccolor.c b/libjpegtwrp/jccolor.c
deleted file mode 100644
index 57a76c36b..000000000
--- a/libjpegtwrp/jccolor.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- * jccolor.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains input colorspace conversion routines.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-// this enables unrolling null_convert's loop, and reading/write ints for speed
-#define ENABLE_ANDROID_NULL_CONVERT
-
-/* Private subobject */
-
-typedef struct {
-  struct jpeg_color_converter pub; /* public fields */
-
-  /* Private state for RGB->YCC conversion */
-  INT32 * rgb_ycc_tab;		/* => table for RGB to YCbCr conversion */
-} my_color_converter;
-
-typedef my_color_converter * my_cconvert_ptr;
-
-
-/**************** RGB -> YCbCr conversion: most common case **************/
-
-/*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
- *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
- *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
- * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
- * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
- * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
- * were not represented exactly.  Now we sacrifice exact representation of
- * maximum red and maximum blue in order to get exact grayscales.
- *
- * To avoid floating-point arithmetic, we represent the fractional constants
- * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
- * the products by 2^16, with appropriate rounding, to get the correct answer.
- *
- * For even more speed, we avoid doing any multiplications in the inner loop
- * by precalculating the constants times R,G,B for all possible values.
- * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
- * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
- * in the tables to save adding them separately in the inner loop.
- */
-
-#define SCALEBITS	16	/* speediest right-shift on some machines */
-#define CBCR_OFFSET	((INT32) CENTERJSAMPLE << SCALEBITS)
-#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
-#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-/* We allocate one big table and divide it up into eight parts, instead of
- * doing eight alloc_small requests.  This lets us use a single table base
- * address, which can be held in a register in the inner loops on many
- * machines (more than can hold all eight addresses, anyway).
- */
-
-#define R_Y_OFF		0			/* offset to R => Y section */
-#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
-#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
-#define R_CB_OFF	(3*(MAXJSAMPLE+1))
-#define G_CB_OFF	(4*(MAXJSAMPLE+1))
-#define B_CB_OFF	(5*(MAXJSAMPLE+1))
-#define R_CR_OFF	B_CB_OFF		/* B=>Cb, R=>Cr are the same */
-#define G_CR_OFF	(6*(MAXJSAMPLE+1))
-#define B_CR_OFF	(7*(MAXJSAMPLE+1))
-#define TABLE_SIZE	(8*(MAXJSAMPLE+1))
-
-
-/*
- * Initialize for RGB->YCC colorspace conversion.
- */
-
-METHODDEF(void)
-rgb_ycc_start (j_compress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  INT32 * rgb_ycc_tab;
-  INT32 i;
-
-  /* Allocate and fill in the conversion tables. */
-  cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(TABLE_SIZE * SIZEOF(INT32)));
-
-  for (i = 0; i <= MAXJSAMPLE; i++) {
-    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
-    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
-    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
-    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
-    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
-    /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
-     * This ensures that the maximum output will round to MAXJSAMPLE
-     * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
-     */
-    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
-/*  B=>Cb and R=>Cr tables are the same
-    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
-*/
-    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
-    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- *
- * Note that we change from the application's interleaved-pixel format
- * to our internal noninterleaved, one-plane-per-component format.
- * The input buffer is therefore three times as wide as the output buffer.
- *
- * A starting row offset is provided only for the output buffer.  The caller
- * can easily adjust the passed input_buf value to accommodate any row
- * offset required on that side.
- */
-
-METHODDEF(void)
-rgb_ycc_convert (j_compress_ptr cinfo,
-		 JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		 JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr0, outptr1, outptr2;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr0 = output_buf[0][output_row];
-    outptr1 = output_buf[1][output_row];
-    outptr2 = output_buf[2][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
-      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
-       * must be too; we do not need an explicit range-limiting operation.
-       * Hence the value being shifted is never negative, and we don't
-       * need the general RIGHT_SHIFT macro.
-       */
-      /* Y */
-      outptr0[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-      /* Cb */
-      outptr1[col] = (JSAMPLE)
-		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
-		 >> SCALEBITS);
-      /* Cr */
-      outptr2[col] = (JSAMPLE)
-		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/**************** Cases other than RGB -> YCbCr **************/
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles RGB->grayscale conversion, which is the same
- * as the RGB->Y portion of RGB->YCbCr.
- * We assume rgb_ycc_start has been called (we only use the Y tables).
- */
-
-METHODDEF(void)
-rgb_gray_convert (j_compress_ptr cinfo,
-		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		  JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
-      /* Y */
-      outptr[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles Adobe-style CMYK->YCCK conversion,
- * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same
- * conversion as above, while passing K (black) unchanged.
- * We assume rgb_ycc_start has been called.
- */
-
-METHODDEF(void)
-cmyk_ycck_convert (j_compress_ptr cinfo,
-		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		   JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr0, outptr1, outptr2, outptr3;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr0 = output_buf[0][output_row];
-    outptr1 = output_buf[1][output_row];
-    outptr2 = output_buf[2][output_row];
-    outptr3 = output_buf[3][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = MAXJSAMPLE - GETJSAMPLE(inptr[0]);
-      g = MAXJSAMPLE - GETJSAMPLE(inptr[1]);
-      b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
-      /* K passes through as-is */
-      outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
-      inptr += 4;
-      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
-       * must be too; we do not need an explicit range-limiting operation.
-       * Hence the value being shifted is never negative, and we don't
-       * need the general RIGHT_SHIFT macro.
-       */
-      /* Y */
-      outptr0[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-      /* Cb */
-      outptr1[col] = (JSAMPLE)
-		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
-		 >> SCALEBITS);
-      /* Cr */
-      outptr2[col] = (JSAMPLE)
-		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles grayscale output with no conversion.
- * The source can be either plain grayscale or YCbCr (since Y == gray).
- */
-
-METHODDEF(void)
-grayscale_convert (j_compress_ptr cinfo,
-		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		   JDIMENSION output_row, int num_rows)
-{
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-  int instride = cinfo->input_components;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
-      inptr += instride;
-    }
-  }
-}
-
-#ifdef ENABLE_ANDROID_NULL_CONVERT
-
-typedef unsigned long UINT32;
-
-#define B0(n)   ((n) & 0xFF)
-#define B1(n)   (((n) >> 8) & 0xFF)
-#define B2(n)   (((n) >> 16) & 0xFF)
-#define B3(n)   ((n) >> 24)
-
-#define PACK(a, b, c, d)    ((a) | ((b) << 8) | ((c) << 16) | ((d) << 24))
-
-static int ptr_is_quad(const void* p)
-{
-    return (((const char*)p - (const char*)0) & 3) == 0;
-}
-
-static void copyquads(const UINT32 in[], UINT32 out0[], UINT32 out1[], UINT32 out2[], int col4)
-{
-    do {
-        UINT32 src0 = *in++;
-        UINT32 src1 = *in++;
-        UINT32 src2 = *in++;
-        // LEndian
-        *out0++ = PACK(B0(src0), B3(src0), B2(src1), B1(src2));
-        *out1++ = PACK(B1(src0), B0(src1), B3(src1), B2(src2));
-        *out2++ = PACK(B2(src0), B1(src1), B0(src2), B3(src2));
-    } while (--col4 != 0);
-}
-
-#endif
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles multi-component colorspaces without conversion.
- * We assume input_components == num_components.
- */
-
-METHODDEF(void)
-null_convert (j_compress_ptr cinfo,
-	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-	      JDIMENSION output_row, int num_rows)
-{
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  register int ci;
-  int nc = cinfo->num_components;
-  JDIMENSION num_cols = cinfo->image_width;
-
-#ifdef ENABLE_ANDROID_NULL_CONVERT
-    if (1 == num_rows && 3 == nc && num_cols > 0) {
-        JSAMPROW inptr = *input_buf;
-        JSAMPROW outptr0 = output_buf[0][output_row];
-        JSAMPROW outptr1 = output_buf[1][output_row];
-        JSAMPROW outptr2 = output_buf[2][output_row];
-        
-        int col = num_cols;
-        int col4 = col >> 2;
-        if (col4 > 0 && ptr_is_quad(inptr) && ptr_is_quad(outptr0) &&
-                        ptr_is_quad(outptr1) && ptr_is_quad(outptr2)) {
-            
-            const UINT32* in = (const UINT32*)inptr;
-            UINT32* out0 = (UINT32*)outptr0;
-            UINT32* out1 = (UINT32*)outptr1;
-            UINT32* out2 = (UINT32*)outptr2;
-            copyquads(in, out0, out1, out2, col4);
-            col &= 3;
-            if (0 == col)
-                return;
-            col4 <<= 2;
-            inptr += col4 * 3;  /* we read this 3 times per in copyquads */
-            outptr0 += col4;
-            outptr1 += col4;
-            outptr2 += col4;
-            /* fall through to while-loop */
-        }
-        do {
-            *outptr0++ = *inptr++;
-            *outptr1++ = *inptr++;
-            *outptr2++ = *inptr++;
-        } while (--col != 0);
-        return;
-    }
-SLOW:
-#endif
-  while (--num_rows >= 0) {
-    /* It seems fastest to make a separate pass for each component. */
-    for (ci = 0; ci < nc; ci++) {
-      inptr = *input_buf;
-      outptr = output_buf[ci][output_row];
-      for (col = 0; col < num_cols; col++) {
-	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
-	inptr += nc;
-      }
-    }
-    input_buf++;
-    output_row++;
-  }
-}
-
-
-/*
- * Empty method for start_pass.
- */
-
-METHODDEF(void)
-null_method (j_compress_ptr cinfo)
-{
-  /* no work needed */
-}
-
-
-/*
- * Module initialization routine for input colorspace conversion.
- */
-
-GLOBAL(void)
-jinit_color_converter (j_compress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert;
-
-  cconvert = (my_cconvert_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_color_converter));
-  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
-  /* set start_pass to null method until we find out differently */
-  cconvert->pub.start_pass = null_method;
-
-  /* Make sure input_components agrees with in_color_space */
-  switch (cinfo->in_color_space) {
-  case JCS_GRAYSCALE:
-    if (cinfo->input_components != 1)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  case JCS_RGB:
-#if RGB_PIXELSIZE != 3
-    if (cinfo->input_components != RGB_PIXELSIZE)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-#endif /* else share code with YCbCr */
-
-  case JCS_YCbCr:
-    if (cinfo->input_components != 3)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  case JCS_CMYK:
-  case JCS_YCCK:
-    if (cinfo->input_components != 4)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  default:			/* JCS_UNKNOWN can be anything */
-    if (cinfo->input_components < 1)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-  }
-
-  /* Check num_components, set conversion method based on requested space */
-  switch (cinfo->jpeg_color_space) {
-  case JCS_GRAYSCALE:
-    if (cinfo->num_components != 1)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_GRAYSCALE)
-      cconvert->pub.color_convert = grayscale_convert;
-    else if (cinfo->in_color_space == JCS_RGB) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = rgb_gray_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = grayscale_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_RGB:
-    if (cinfo->num_components != 3)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_YCbCr:
-    if (cinfo->num_components != 3)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = rgb_ycc_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_CMYK:
-    if (cinfo->num_components != 4)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_YCCK:
-    if (cinfo->num_components != 4)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = cmyk_ycck_convert;
-    } else if (cinfo->in_color_space == JCS_YCCK)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  default:			/* allow null conversion of JCS_UNKNOWN */
-    if (cinfo->jpeg_color_space != cinfo->in_color_space ||
-	cinfo->num_components != cinfo->input_components)
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    cconvert->pub.color_convert = null_convert;
-    break;
-  }
-}