|
|
---
title: Technicolor AFM0002
has_children: false
parent: ONT
---
# Hardware Specifications
| | |
| ----------- | ----------------------------------------------- |
| Vendor | Technicolor |
| Model | AFM0002TIM/FWB/WND |
| Alias | |
| Chipset | Realtek RTL9601B |
| Flash | |
| RAM | |
| System | Linux (Luna SDK) |
| HSGMII | NO |
| Optics | |
| IP address | 192.168.2.1 / 169.0.0.1 |
| Web Gui | Can be enabled, user `admin`, password `system` |
| SSH | ✅ user `admin`, password `system` |
| Form Factor | miniONT SFP |
{% include image.html file="afm0002tim.jpg" alt="AFM0002TIM" caption="AFM0002TIM" %}
# Hardware Revisions
- AFM0002TIM (IP address: 192.168.2.1)
- AFM0002FWB (IP address: 169.0.0.1)
- AFM0002WND
{% include alert.html content="The version used to obtain the info shown on this page is the AFM0002TIM" alert="Info" icon="svg-info" color="blue" %}
{% include alert.html content="The AFM0002FWB can be transformed into AFM0002TIM. The AFM0002FWB has an older software version." alert="Warning" icon="svg-warning" color="red" %}
# List of software versions
- V1_7_8_180122
- V1_7_8_180725
- V1_7_8_181123
- V1_7_8_210412
- V1_7_8_210928
# List of partitions
| dev | size | erasesize | name |
| ----- | -------- | --------- | --------------- |
| mtd0 | 00040000 | 00001000 | "boot" |
| mtd1 | 00002000 | 00001000 | "env" |
| mtd2 | 00002000 | 00001000 | "env2" |
| mtd3 | 0003c000 | 00001000 | "config" |
| mtd4 | 00300000 | 00001000 | "k0" |
| mtd5 | 004c0000 | 00001000 | "r0" |
| mtd6 | 00300000 | 00001000 | "k1" |
| mtd7 | 004c0000 | 00001000 | "r1" |
| mtd8 | 00001000 | 00001000 | "Partition_008" |
| mtd9 | 00001000 | 00001000 | "Partition_009" |
| mtd10 | 00001000 | 00001000 | "Partition_010" |
| mtd11 | 00001000 | 00001000 | "Partition_011" |
| mtd12 | 00300000 | 00001000 | "linux" |
| mtd13 | 004c0000 | 00001000 | "rootfs" |
This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
# List of firmwares and files
## Useful files
- `/var/config/lastgood.xml` - Contains the user portion of the configuration
- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (i.e. that _should_ not be changed)
- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below)
## Useful binaries
- `/etc/scripts/flash` - Used to manipulate the config files in a samewhat safe manner
- `xmlconfig` - Used to low-level manipulate the XML config files. Called by `flash`
- `nv` - Used to manipulate the nvram storage, including persistent config entries via `nv setenv`/`nv getenv`
- `omcicli` - Used to interact with the running OMCI daemon
- `omci_app` - The OMCI daemon
- `diag` - Used to run low-level diagnostics commands on the stick
# Useful Commands
## Getting/Setting the ONT's S/N
```sh
# /etc/scripts/bin flash get GPON_SN
GPON_SN=TMBB00000000
# /etc/scripts/bin flash set GPON_SN TMBB0A1B2C3D
```
## Getting/Setting the ONT's PLOAM password
{% include alert.html content="The PLOAM password is stored in ASCII format" %}
```sh
# /etc/scripts/bin flash get GPON_PLOAM_PASSWD
GPON_PLOAM_PASSWD=AAAAAAAAAA
# /etc/scripts/bin flash set GPON_PLOAM_PASSWD AAAAAAAAAA
```
## Enabling the Web UI
```sh
# /bin/iptables -D INPUT -p tcp --dport 80 -j DROP
```
## Checking the currently active image
```sh
# nv getenv sw_active
sw_activ=1
# nv getenv sw_version0
sw_version0=V1_7_8_210412
# nv getenv sw_version1
sw_version1=V1_7_8_210412
```
## Booting to a different image
```sh
# nv setenv sw_commit 0|1
# reboot
```
## Querying a particular OMCI ME
```sh
# omcicli mib get MIB_IDX
```
# Low Level Modding
{% include alert.html content="This section is based on `V1_7_8_210412` firmware version of the stick" %}
## Trasnfering files from/to the stick
Works with binary files too, just run md5sum on source and destination to make sure you are not corrupting anything...
From the stick to the PC:
```sh
# ssh admin@192.168.2.1 "cat /tmp/omcilog" > omcilog.log
```
From the PC to the stick
```sh
# cat lastgood.xml | ssh admin@192.168.2.1 "cat > /var/config/lastgood.xml"
```
{% include alert.html content="If a Windows system is used replace type with cat and run the commands from cmd (not Powershell)" %}
## Extracting and repacking the rootfs
```sh
# unsquashfs mtd5.bin
# mksquashfs squashfs-root rootfs -b 131072 -comp lzma -no-recovery
```
## Flashing a new rootfs
{% include alert.html content="Only the inactive image can be flashed" %}
So mtd4/5 if you are on image1, mtd6/7 if you are on image0.
The follwing examples flashes a new rootfs to image1 and boots to it
```sh
# flash_eraseall /dev/mtd7
# cat /tmp/rootfs.new > /dev/mtd7
# nv setenv sw_commit=1
# reboot
```
## Adding support to configurable SW and HW versions, VENDOR ID and much more
`/etc/scripts/flash` can be flashed in order to add support for some variables implemented in `omci_app` but removed from `xmlconfig`. The patch is below (change the values to suit your needs)
```patch
--- squashfs-root/etc/scripts/flash 2021-09-28 10:38:52.000000000 +0200
+++ squashfs-root.new/etc/scripts/flash 2022-08-04 00:00:29.769605000 +0200
@@ -62,7 +62,26 @@
if [ `echo $para | egrep $specific_mib_patten` ]; then
/bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g" | sed -r "s/,+//g"
else
- /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g"
+ case "$para" in
+ "OMCI_EQID")
+ echo "$para=MY_EQID"
+ ;;
+ "OMCI_VENDOR_ID")
+ echo "$para=MY_VENDOR"
+ ;;
+ "OMCI_SW_VER1")
+ echo "$para=MY_SW_VER1"
+ ;;
+ "OMCI_SW_VER2")
+ echo "$para=MY_SW_VER2"
+ ;;
+ "OMCI_ONT_VER")
+ echo "$para=MY_HW_VER"
+ ;;
+ *)
+ /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g"
+ ;;
+ esac
fi
if [ "$?" = "0" ]; then
exit 0
```
## Increasing the length of the software version from 13 to 14 characters
`omci_app` has an hard-coded limit of 13 characters for the software version, which is too low. We can binary patch it to increase it to 14 (or more, if you dare/need)
```
JVhEWjAwNCUAAAAIAAgACAAAAAAAAAAAAAAAAAAAAABvbWNpX2FwcG9tY2lfYXBwH4sIAAAAAAAA
AwMAAAAAAAAAAAAfiwgAAAAAAAADY2BoYGZgYFjh9Uq/aNcZQdXsOh3R5ktr/fd0sTEwcuTnJmfG
JxYUYJVlZGAA0gCHsMK2QQAAAAAAAEQlWERaMDA0JQ==
```
Save it as `omci_app.xdelta.base64`, then run:
```sh
# base64 -d omci_app.xdelta.base64 > omci_app.xdelta
# xdelta patch omci_app.xdelta bin/omci_app bin/omci_app.new
# mv bin/omci_app.new bin/omci_app
```
For reference, the patch changes the follwing section of the omci_app:
```diff
-00408c24 24 05 00 0e li a1,0xe
+00408c24 24 05 00 0f li a1,0xf
-00408cf0 24 05 00 0f li a1,0xe
+00408cf0 24 05 00 0f li a1,0xf
```
(It's inside the function referecing the string `OMCI_SW_VER1`)
The original file md5sum is: `4aea2f72bacc11256b7e2c1583d2ad4f`
The patched file md5sum is: `da20327c4c002e4c27f82f6ee63dbc1a`
## Enabling PLOAM logging
```sh
/etc/scripts/bin flash set OMCI_DBGLVL 1
/etc/scripts/bin flash set OMCI_DBGLOGFILE 1
reboot
/bin/omcicli set logfile 1 ffffffff
```
1. The binary log will be placed inside: `/tmp/omcilog`
2. You can convert it into .pcap using https://github.com/ADeltaX/omcilog2pcap
3. You can then open it with Wireshark by installing the OMCI plugin from https://wiki.wireshark.org/Contrib.md
If you want to log everything since the stick boots, you can create a custom rootfs. Place the last command inside `etc/runomci.sh` as the last line of the file
# Known Bugs
# Miscellaneous Links
- [omcilog2pcap](https://github.com/ADeltaX/omcilog2pcap)
|
