diff options
| -rw-r--r-- | 07.-KrakenSDR-Troubleshooting.md | 5 |
1 files changed, 1 insertions, 4 deletions
diff --git a/07.-KrakenSDR-Troubleshooting.md b/07.-KrakenSDR-Troubleshooting.md index 07a9009..3594dfb 100644 --- a/07.-KrakenSDR-Troubleshooting.md +++ b/07.-KrakenSDR-Troubleshooting.md @@ -5,13 +5,10 @@ Please note that we can only provide troubleshooting advice for our ready to use #### The KrakenSDR web interface only shows a header with three buttons. This is due to cookies being totally disabled by your browser settings. Please enable cookies as the dash backend requires them to load and save settings. -#### The KrakenSDR web interface loads, but shows no activity -This is most likely due to a poor power connection to the KrakenSDR. Ensure that you are using a quality power supply that can provide at least up to 2.4A. - #### The KrakenSDR graphs are updating very slowly, or the UI is slow It could be that your Pi 4 overheating and throttling the CPU, or insufficiently powered and also throttling. -#### Connection and sync status remain red in the Web GUI +#### Connection and sync status remain red in the Web GUI / The KrakenSDR web interface loads, but shows no activity This indicates that the Kraken isn't connecting to the software correctly. The first most likely cause of that is a poor quality or low current power supply being used with the KrakenSDR. KrakenSDR draws up to 2.2A, so a 2.4A or better 5V power supply is required. If a 1A or 2A power supply is used the unit will be unable to power up when the software requests it to start. |