19 files changed, 4018 insertions, 0 deletions

diff --git a/src/input_common/helpers/joycon_driver.cpp b/src/input_common/helpers/joycon_driver.cpp
new file mode 100644
index 000000000..4159e5717
--- /dev/null
+++ b/src/input_common/helpers/joycon_driver.cpp
@@ -0,0 +1,572 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "common/swap.h"
+#include "common/thread.h"
+#include "input_common/helpers/joycon_driver.h"
+#include "input_common/helpers/joycon_protocol/calibration.h"
+#include "input_common/helpers/joycon_protocol/generic_functions.h"
+#include "input_common/helpers/joycon_protocol/irs.h"
+#include "input_common/helpers/joycon_protocol/nfc.h"
+#include "input_common/helpers/joycon_protocol/poller.h"
+#include "input_common/helpers/joycon_protocol/ringcon.h"
+#include "input_common/helpers/joycon_protocol/rumble.h"
+
+namespace InputCommon::Joycon {
+JoyconDriver::JoyconDriver(std::size_t port_) : port{port_} {
+    hidapi_handle = std::make_shared<JoyconHandle>();
+}
+
+JoyconDriver::~JoyconDriver() {
+    Stop();
+}
+
+void JoyconDriver::Stop() {
+    is_connected = false;
+    input_thread = {};
+}
+
+DriverResult JoyconDriver::RequestDeviceAccess(SDL_hid_device_info* device_info) {
+    std::scoped_lock lock{mutex};
+
+    handle_device_type = ControllerType::None;
+    GetDeviceType(device_info, handle_device_type);
+    if (handle_device_type == ControllerType::None) {
+        return DriverResult::UnsupportedControllerType;
+    }
+
+    hidapi_handle->handle =
+        SDL_hid_open(device_info->vendor_id, device_info->product_id, device_info->serial_number);
+    std::memcpy(&handle_serial_number, device_info->serial_number, 15);
+    if (!hidapi_handle->handle) {
+        LOG_ERROR(Input, "Yuzu can't gain access to this device: ID {:04X}:{:04X}.",
+                  device_info->vendor_id, device_info->product_id);
+        return DriverResult::HandleInUse;
+    }
+    SDL_hid_set_nonblocking(hidapi_handle->handle, 1);
+    return DriverResult::Success;
+}
+
+DriverResult JoyconDriver::InitializeDevice() {
+    if (!hidapi_handle->handle) {
+        return DriverResult::InvalidHandle;
+    }
+    std::scoped_lock lock{mutex};
+    disable_input_thread = true;
+
+    // Reset Counters
+    error_counter = 0;
+    hidapi_handle->packet_counter = 0;
+
+    // Reset external device status
+    starlink_connected = false;
+    ring_connected = false;
+    amiibo_detected = false;
+
+    // Set HW default configuration
+    vibration_enabled = true;
+    motion_enabled = true;
+    hidbus_enabled = false;
+    nfc_enabled = false;
+    passive_enabled = false;
+    irs_enabled = false;
+    gyro_sensitivity = Joycon::GyroSensitivity::DPS2000;
+    gyro_performance = Joycon::GyroPerformance::HZ833;
+    accelerometer_sensitivity = Joycon::AccelerometerSensitivity::G8;
+    accelerometer_performance = Joycon::AccelerometerPerformance::HZ100;
+
+    // Initialize HW Protocols
+    calibration_protocol = std::make_unique<CalibrationProtocol>(hidapi_handle);
+    generic_protocol = std::make_unique<GenericProtocol>(hidapi_handle);
+    irs_protocol = std::make_unique<IrsProtocol>(hidapi_handle);
+    nfc_protocol = std::make_unique<NfcProtocol>(hidapi_handle);
+    ring_protocol = std::make_unique<RingConProtocol>(hidapi_handle);
+    rumble_protocol = std::make_unique<RumbleProtocol>(hidapi_handle);
+
+    // Get fixed joycon info
+    generic_protocol->GetVersionNumber(version);
+    generic_protocol->GetColor(color);
+    if (handle_device_type == ControllerType::Pro) {
+        // Some 3rd party controllers aren't pro controllers
+        generic_protocol->GetControllerType(device_type);
+    } else {
+        device_type = handle_device_type;
+    }
+    generic_protocol->GetSerialNumber(serial_number);
+    supported_features = GetSupportedFeatures();
+
+    // Get Calibration data
+    calibration_protocol->GetLeftJoyStickCalibration(left_stick_calibration);
+    calibration_protocol->GetRightJoyStickCalibration(right_stick_calibration);
+    calibration_protocol->GetImuCalibration(motion_calibration);
+
+    // Set led status
+    generic_protocol->SetLedBlinkPattern(static_cast<u8>(1 + port));
+
+    // Apply HW configuration
+    SetPollingMode();
+
+    // Initialize joycon poller
+    joycon_poller = std::make_unique<JoyconPoller>(device_type, left_stick_calibration,
+                                                   right_stick_calibration, motion_calibration);
+
+    // Start pooling for data
+    is_connected = true;
+    if (!input_thread_running) {
+        input_thread =
+            std::jthread([this](std::stop_token stop_token) { InputThread(stop_token); });
+    }
+
+    disable_input_thread = false;
+    return DriverResult::Success;
+}
+
+void JoyconDriver::InputThread(std::stop_token stop_token) {
+    LOG_INFO(Input, "Joycon Adapter input thread started");
+    Common::SetCurrentThreadName("JoyconInput");
+    input_thread_running = true;
+
+    // Max update rate is 5ms, ensure we are always able to read a bit faster
+    constexpr int ThreadDelay = 2;
+    std::vector<u8> buffer(MaxBufferSize);
+
+    while (!stop_token.stop_requested()) {
+        int status = 0;
+
+        if (!IsInputThreadValid()) {
+            input_thread.request_stop();
+            continue;
+        }
+
+        // By disabling the input thread we can ensure custom commands will succeed as no package is
+        // skipped
+        if (!disable_input_thread) {
+            status = SDL_hid_read_timeout(hidapi_handle->handle, buffer.data(), buffer.size(),
+                                          ThreadDelay);
+        } else {
+            std::this_thread::sleep_for(std::chrono::milliseconds(ThreadDelay));
+        }
+
+        if (IsPayloadCorrect(status, buffer)) {
+            OnNewData(buffer);
+        }
+
+        std::this_thread::yield();
+    }
+
+    is_connected = false;
+    input_thread_running = false;
+    LOG_INFO(Input, "Joycon Adapter input thread stopped");
+}
+
+void JoyconDriver::OnNewData(std::span<u8> buffer) {
+    const auto report_mode = static_cast<InputReport>(buffer[0]);
+
+    // Packages can be a litte bit inconsistent. Average the delta time to provide a smoother motion
+    // experience
+    switch (report_mode) {
+    case InputReport::STANDARD_FULL_60HZ:
+    case InputReport::NFC_IR_MODE_60HZ:
+    case InputReport::SIMPLE_HID_MODE: {
+        const auto now = std::chrono::steady_clock::now();
+        const auto new_delta_time = static_cast<u64>(
+            std::chrono::duration_cast<std::chrono::microseconds>(now - last_update).count());
+        delta_time = ((delta_time * 8) + (new_delta_time * 2)) / 10;
+        last_update = now;
+        joycon_poller->UpdateColor(color);
+        break;
+    }
+    default:
+        break;
+    }
+
+    const MotionStatus motion_status{
+        .is_enabled = motion_enabled,
+        .delta_time = delta_time,
+        .gyro_sensitivity = gyro_sensitivity,
+        .accelerometer_sensitivity = accelerometer_sensitivity,
+    };
+
+    // TODO: Remove this when calibration is properly loaded and not calculated
+    if (ring_connected && report_mode == InputReport::STANDARD_FULL_60HZ) {
+        InputReportActive data{};
+        memcpy(&data, buffer.data(), sizeof(InputReportActive));
+        calibration_protocol->GetRingCalibration(ring_calibration, data.ring_input);
+    }
+
+    const RingStatus ring_status{
+        .is_enabled = ring_connected,
+        .default_value = ring_calibration.default_value,
+        .max_value = ring_calibration.max_value,
+        .min_value = ring_calibration.min_value,
+    };
+
+    if (irs_protocol->IsEnabled()) {
+        irs_protocol->RequestImage(buffer);
+        joycon_poller->UpdateCamera(irs_protocol->GetImage(), irs_protocol->GetIrsFormat());
+    }
+
+    if (nfc_protocol->IsEnabled()) {
+        if (amiibo_detected) {
+            if (!nfc_protocol->HasAmiibo()) {
+                joycon_poller->UpdateAmiibo({});
+                amiibo_detected = false;
+                return;
+            }
+        }
+
+        if (!amiibo_detected) {
+            std::vector<u8> data(0x21C);
+            const auto result = nfc_protocol->ScanAmiibo(data);
+            if (result == DriverResult::Success) {
+                joycon_poller->UpdateAmiibo(data);
+                amiibo_detected = true;
+            }
+        }
+    }
+
+    switch (report_mode) {
+    case InputReport::STANDARD_FULL_60HZ:
+        joycon_poller->ReadActiveMode(buffer, motion_status, ring_status);
+        break;
+    case InputReport::NFC_IR_MODE_60HZ:
+        joycon_poller->ReadNfcIRMode(buffer, motion_status);
+        break;
+    case InputReport::SIMPLE_HID_MODE:
+        joycon_poller->ReadPassiveMode(buffer);
+        break;
+    case InputReport::SUBCMD_REPLY:
+        LOG_DEBUG(Input, "Unhandled command reply");
+        break;
+    default:
+        LOG_ERROR(Input, "Report mode not Implemented {}", report_mode);
+        break;
+    }
+}
+
+DriverResult JoyconDriver::SetPollingMode() {
+    disable_input_thread = true;
+
+    rumble_protocol->EnableRumble(vibration_enabled && supported_features.vibration);
+
+    if (motion_enabled && supported_features.motion) {
+        generic_protocol->EnableImu(true);
+        generic_protocol->SetImuConfig(gyro_sensitivity, gyro_performance,
+                                       accelerometer_sensitivity, accelerometer_performance);
+    } else {
+        generic_protocol->EnableImu(false);
+    }
+
+    if (irs_protocol->IsEnabled()) {
+        irs_protocol->DisableIrs();
+    }
+
+    if (nfc_protocol->IsEnabled()) {
+        amiibo_detected = false;
+        nfc_protocol->DisableNfc();
+    }
+
+    if (ring_protocol->IsEnabled()) {
+        ring_connected = false;
+        ring_protocol->DisableRingCon();
+    }
+
+    if (irs_enabled && supported_features.irs) {
+        auto result = irs_protocol->EnableIrs();
+        if (result == DriverResult::Success) {
+            disable_input_thread = false;
+            return result;
+        }
+        irs_protocol->DisableIrs();
+        LOG_ERROR(Input, "Error enabling IRS");
+    }
+
+    if (nfc_enabled && supported_features.nfc) {
+        auto result = nfc_protocol->EnableNfc();
+        if (result == DriverResult::Success) {
+            result = nfc_protocol->StartNFCPollingMode();
+        }
+        if (result == DriverResult::Success) {
+            disable_input_thread = false;
+            return result;
+        }
+        nfc_protocol->DisableNfc();
+        LOG_ERROR(Input, "Error enabling NFC");
+    }
+
+    if (hidbus_enabled && supported_features.hidbus) {
+        auto result = ring_protocol->EnableRingCon();
+        if (result == DriverResult::Success) {
+            result = ring_protocol->StartRingconPolling();
+        }
+        if (result == DriverResult::Success) {
+            ring_connected = true;
+            disable_input_thread = false;
+            return result;
+        }
+        ring_connected = false;
+        ring_protocol->DisableRingCon();
+        LOG_ERROR(Input, "Error enabling Ringcon");
+    }
+
+    if (passive_enabled && supported_features.passive) {
+        const auto result = generic_protocol->EnablePassiveMode();
+        if (result == DriverResult::Success) {
+            disable_input_thread = false;
+            return result;
+        }
+        LOG_ERROR(Input, "Error enabling passive mode");
+    }
+
+    // Default Mode
+    const auto result = generic_protocol->EnableActiveMode();
+    if (result != DriverResult::Success) {
+        LOG_ERROR(Input, "Error enabling active mode");
+    }
+
+    disable_input_thread = false;
+    return result;
+}
+
+JoyconDriver::SupportedFeatures JoyconDriver::GetSupportedFeatures() {
+    SupportedFeatures features{
+        .passive = true,
+        .motion = true,
+        .vibration = true,
+    };
+
+    if (device_type == ControllerType::Right) {
+        features.nfc = true;
+        features.irs = true;
+        features.hidbus = true;
+    }
+
+    if (device_type == ControllerType::Pro) {
+        features.nfc = true;
+    }
+    return features;
+}
+
+bool JoyconDriver::IsInputThreadValid() const {
+    if (!is_connected.load()) {
+        return false;
+    }
+    if (hidapi_handle->handle == nullptr) {
+        return false;
+    }
+    // Controller is not responding. Terminate connection
+    if (error_counter > MaxErrorCount) {
+        return false;
+    }
+    return true;
+}
+
+bool JoyconDriver::IsPayloadCorrect(int status, std::span<const u8> buffer) {
+    if (status <= -1) {
+        error_counter++;
+        return false;
+    }
+    // There's no new data
+    if (status == 0) {
+        return false;
+    }
+    // No reply ever starts with zero
+    if (buffer[0] == 0x00) {
+        error_counter++;
+        return false;
+    }
+    error_counter = 0;
+    return true;
+}
+
+DriverResult JoyconDriver::SetVibration(const VibrationValue& vibration) {
+    std::scoped_lock lock{mutex};
+    if (disable_input_thread) {
+        return DriverResult::HandleInUse;
+    }
+    return rumble_protocol->SendVibration(vibration);
+}
+
+DriverResult JoyconDriver::SetLedConfig(u8 led_pattern) {
+    std::scoped_lock lock{mutex};
+    if (disable_input_thread) {
+        return DriverResult::HandleInUse;
+    }
+    return generic_protocol->SetLedPattern(led_pattern);
+}
+
+DriverResult JoyconDriver::SetIrsConfig(IrsMode mode_, IrsResolution format_) {
+    std::scoped_lock lock{mutex};
+    if (disable_input_thread) {
+        return DriverResult::HandleInUse;
+    }
+    disable_input_thread = true;
+    const auto result = irs_protocol->SetIrsConfig(mode_, format_);
+    disable_input_thread = false;
+    return result;
+}
+
+DriverResult JoyconDriver::SetPasiveMode() {
+    std::scoped_lock lock{mutex};
+    motion_enabled = false;
+    hidbus_enabled = false;
+    nfc_enabled = false;
+    passive_enabled = true;
+    irs_enabled = false;
+    return SetPollingMode();
+}
+
+DriverResult JoyconDriver::SetActiveMode() {
+    if (is_ring_disabled_by_irs) {
+        is_ring_disabled_by_irs = false;
+        SetActiveMode();
+        return SetRingConMode();
+    }
+
+    std::scoped_lock lock{mutex};
+    motion_enabled = true;
+    hidbus_enabled = false;
+    nfc_enabled = false;
+    passive_enabled = false;
+    irs_enabled = false;
+    return SetPollingMode();
+}
+
+DriverResult JoyconDriver::SetIrMode() {
+    std::scoped_lock lock{mutex};
+
+    if (!supported_features.irs) {
+        return DriverResult::NotSupported;
+    }
+
+    if (ring_connected) {
+        is_ring_disabled_by_irs = true;
+    }
+
+    motion_enabled = false;
+    hidbus_enabled = false;
+    nfc_enabled = false;
+    passive_enabled = false;
+    irs_enabled = true;
+    return SetPollingMode();
+}
+
+DriverResult JoyconDriver::SetNfcMode() {
+    std::scoped_lock lock{mutex};
+
+    if (!supported_features.nfc) {
+        return DriverResult::NotSupported;
+    }
+
+    motion_enabled = true;
+    hidbus_enabled = false;
+    nfc_enabled = true;
+    passive_enabled = false;
+    irs_enabled = false;
+    return SetPollingMode();
+}
+
+DriverResult JoyconDriver::SetRingConMode() {
+    std::scoped_lock lock{mutex};
+
+    if (!supported_features.hidbus) {
+        return DriverResult::NotSupported;
+    }
+
+    motion_enabled = true;
+    hidbus_enabled = true;
+    nfc_enabled = false;
+    passive_enabled = false;
+    irs_enabled = false;
+
+    const auto result = SetPollingMode();
+
+    if (!ring_connected) {
+        return DriverResult::NoDeviceDetected;
+    }
+
+    return result;
+}
+
+bool JoyconDriver::IsConnected() const {
+    std::scoped_lock lock{mutex};
+    return is_connected.load();
+}
+
+bool JoyconDriver::IsVibrationEnabled() const {
+    std::scoped_lock lock{mutex};
+    return vibration_enabled;
+}
+
+FirmwareVersion JoyconDriver::GetDeviceVersion() const {
+    std::scoped_lock lock{mutex};
+    return version;
+}
+
+Color JoyconDriver::GetDeviceColor() const {
+    std::scoped_lock lock{mutex};
+    return color;
+}
+
+std::size_t JoyconDriver::GetDevicePort() const {
+    std::scoped_lock lock{mutex};
+    return port;
+}
+
+ControllerType JoyconDriver::GetDeviceType() const {
+    std::scoped_lock lock{mutex};
+    return device_type;
+}
+
+ControllerType JoyconDriver::GetHandleDeviceType() const {
+    std::scoped_lock lock{mutex};
+    return handle_device_type;
+}
+
+SerialNumber JoyconDriver::GetSerialNumber() const {
+    std::scoped_lock lock{mutex};
+    return serial_number;
+}
+
+SerialNumber JoyconDriver::GetHandleSerialNumber() const {
+    std::scoped_lock lock{mutex};
+    return handle_serial_number;
+}
+
+void JoyconDriver::SetCallbacks(const JoyconCallbacks& callbacks) {
+    joycon_poller->SetCallbacks(callbacks);
+}
+
+DriverResult JoyconDriver::GetDeviceType(SDL_hid_device_info* device_info,
+                                         ControllerType& controller_type) {
+    static constexpr std::array<std::pair<u32, ControllerType>, 2> supported_devices{
+        std::pair<u32, ControllerType>{0x2006, ControllerType::Left},
+        {0x2007, ControllerType::Right},
+    };
+    constexpr u16 nintendo_vendor_id = 0x057e;
+
+    controller_type = ControllerType::None;
+    if (device_info->vendor_id != nintendo_vendor_id) {
+        return DriverResult::UnsupportedControllerType;
+    }
+
+    for (const auto& [product_id, type] : supported_devices) {
+        if (device_info->product_id == static_cast<u16>(product_id)) {
+            controller_type = type;
+            return Joycon::DriverResult::Success;
+        }
+    }
+    return Joycon::DriverResult::UnsupportedControllerType;
+}
+
+DriverResult JoyconDriver::GetSerialNumber(SDL_hid_device_info* device_info,
+                                           SerialNumber& serial_number) {
+    if (device_info->serial_number == nullptr) {
+        return DriverResult::Unknown;
+    }
+    std::memcpy(&serial_number, device_info->serial_number, 15);
+    return Joycon::DriverResult::Success;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_driver.h b/src/input_common/helpers/joycon_driver.h
new file mode 100644
index 000000000..c1e189fa5
--- /dev/null
+++ b/src/input_common/helpers/joycon_driver.h
@@ -0,0 +1,150 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <atomic>
+#include <functional>
+#include <mutex>
+#include <span>
+#include <thread>
+
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+class CalibrationProtocol;
+class GenericProtocol;
+class IrsProtocol;
+class NfcProtocol;
+class JoyconPoller;
+class RingConProtocol;
+class RumbleProtocol;
+
+class JoyconDriver final {
+public:
+    explicit JoyconDriver(std::size_t port_);
+
+    ~JoyconDriver();
+
+    DriverResult RequestDeviceAccess(SDL_hid_device_info* device_info);
+    DriverResult InitializeDevice();
+    void Stop();
+
+    bool IsConnected() const;
+    bool IsVibrationEnabled() const;
+
+    FirmwareVersion GetDeviceVersion() const;
+    Color GetDeviceColor() const;
+    std::size_t GetDevicePort() const;
+    ControllerType GetDeviceType() const;
+    ControllerType GetHandleDeviceType() const;
+    SerialNumber GetSerialNumber() const;
+    SerialNumber GetHandleSerialNumber() const;
+
+    DriverResult SetVibration(const VibrationValue& vibration);
+    DriverResult SetLedConfig(u8 led_pattern);
+    DriverResult SetIrsConfig(IrsMode mode_, IrsResolution format_);
+    DriverResult SetPasiveMode();
+    DriverResult SetActiveMode();
+    DriverResult SetIrMode();
+    DriverResult SetNfcMode();
+    DriverResult SetRingConMode();
+
+    void SetCallbacks(const JoyconCallbacks& callbacks);
+
+    // Returns device type from hidapi handle
+    static DriverResult GetDeviceType(SDL_hid_device_info* device_info,
+                                      ControllerType& controller_type);
+
+    // Returns serial number from hidapi handle
+    static DriverResult GetSerialNumber(SDL_hid_device_info* device_info,
+                                        SerialNumber& serial_number);
+
+private:
+    struct SupportedFeatures {
+        bool passive{};
+        bool hidbus{};
+        bool irs{};
+        bool motion{};
+        bool nfc{};
+        bool vibration{};
+    };
+
+    /// Main thread, actively request new data from the handle
+    void InputThread(std::stop_token stop_token);
+
+    /// Called everytime a valid package arrives
+    void OnNewData(std::span<u8> buffer);
+
+    /// Updates device configuration to enable or disable features
+    DriverResult SetPollingMode();
+
+    /// Returns true if input thread is valid and doesn't need to be stopped
+    bool IsInputThreadValid() const;
+
+    /// Returns true if the data should be interpreted. Otherwise the error counter is incremented
+    bool IsPayloadCorrect(int status, std::span<const u8> buffer);
+
+    /// Returns a list of supported features that can be enabled on this device
+    SupportedFeatures GetSupportedFeatures();
+
+    // Protocol Features
+    std::unique_ptr<CalibrationProtocol> calibration_protocol;
+    std::unique_ptr<GenericProtocol> generic_protocol;
+    std::unique_ptr<IrsProtocol> irs_protocol;
+    std::unique_ptr<NfcProtocol> nfc_protocol;
+    std::unique_ptr<JoyconPoller> joycon_poller;
+    std::unique_ptr<RingConProtocol> ring_protocol;
+    std::unique_ptr<RumbleProtocol> rumble_protocol;
+
+    // Connection status
+    std::atomic<bool> is_connected{};
+    u64 delta_time;
+    std::size_t error_counter{};
+    std::shared_ptr<JoyconHandle> hidapi_handle;
+    std::chrono::time_point<std::chrono::steady_clock> last_update;
+
+    // External device status
+    bool starlink_connected{};
+    bool ring_connected{};
+    bool amiibo_detected{};
+    bool is_ring_disabled_by_irs{};
+
+    // Harware configuration
+    u8 leds{};
+    ReportMode mode{};
+    bool passive_enabled{};   // Low power mode, Ideal for multiple controllers at the same time
+    bool hidbus_enabled{};    // External device support
+    bool irs_enabled{};       // Infrared camera input
+    bool motion_enabled{};    // Enables motion input
+    bool nfc_enabled{};       // Enables Amiibo detection
+    bool vibration_enabled{}; // Allows vibrations
+
+    // Calibration data
+    GyroSensitivity gyro_sensitivity{};
+    GyroPerformance gyro_performance{};
+    AccelerometerSensitivity accelerometer_sensitivity{};
+    AccelerometerPerformance accelerometer_performance{};
+    JoyStickCalibration left_stick_calibration{};
+    JoyStickCalibration right_stick_calibration{};
+    MotionCalibration motion_calibration{};
+    RingCalibration ring_calibration{};
+
+    // Fixed joycon info
+    FirmwareVersion version{};
+    Color color{};
+    std::size_t port{};
+    ControllerType device_type{};        // Device type reported by controller
+    ControllerType handle_device_type{}; // Device type reported by hidapi
+    SerialNumber serial_number{};        // Serial number reported by controller
+    SerialNumber handle_serial_number{}; // Serial number type reported by hidapi
+    SupportedFeatures supported_features{};
+
+    // Thread related
+    mutable std::mutex mutex;
+    std::jthread input_thread;
+    bool input_thread_running{};
+    bool disable_input_thread{};
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/calibration.cpp b/src/input_common/helpers/joycon_protocol/calibration.cpp
new file mode 100644
index 000000000..f6e7e97d5
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/calibration.cpp
@@ -0,0 +1,184 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <cstring>
+
+#include "input_common/helpers/joycon_protocol/calibration.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+CalibrationProtocol::CalibrationProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult CalibrationProtocol::GetLeftJoyStickCalibration(JoyStickCalibration& calibration) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> buffer;
+    DriverResult result{DriverResult::Success};
+    calibration = {};
+
+    result = ReadSPI(CalAddr::USER_LEFT_MAGIC, sizeof(u16), buffer);
+
+    if (result == DriverResult::Success) {
+        const bool has_user_calibration = buffer[0] == 0xB2 && buffer[1] == 0xA1;
+        if (has_user_calibration) {
+            result = ReadSPI(CalAddr::USER_LEFT_DATA, 9, buffer);
+        } else {
+            result = ReadSPI(CalAddr::FACT_LEFT_DATA, 9, buffer);
+        }
+    }
+
+    if (result == DriverResult::Success) {
+        calibration.x.max = static_cast<u16>(((buffer[1] & 0x0F) << 8) | buffer[0]);
+        calibration.y.max = static_cast<u16>((buffer[2] << 4) | (buffer[1] >> 4));
+        calibration.x.center = static_cast<u16>(((buffer[4] & 0x0F) << 8) | buffer[3]);
+        calibration.y.center = static_cast<u16>((buffer[5] << 4) | (buffer[4] >> 4));
+        calibration.x.min = static_cast<u16>(((buffer[7] & 0x0F) << 8) | buffer[6]);
+        calibration.y.min = static_cast<u16>((buffer[8] << 4) | (buffer[7] >> 4));
+    }
+
+    // Nintendo fix for drifting stick
+    // result = ReadSPI(0x60, 0x86 ,buffer, 16);
+    // calibration.deadzone = (u16)((buffer[4] << 8) & 0xF00 | buffer[3]);
+
+    // Set a valid default calibration if data is missing
+    ValidateCalibration(calibration);
+
+    return result;
+}
+
+DriverResult CalibrationProtocol::GetRightJoyStickCalibration(JoyStickCalibration& calibration) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> buffer;
+    DriverResult result{DriverResult::Success};
+    calibration = {};
+
+    result = ReadSPI(CalAddr::USER_RIGHT_MAGIC, sizeof(u16), buffer);
+
+    if (result == DriverResult::Success) {
+        const bool has_user_calibration = buffer[0] == 0xB2 && buffer[1] == 0xA1;
+        if (has_user_calibration) {
+            result = ReadSPI(CalAddr::USER_RIGHT_DATA, 9, buffer);
+        } else {
+            result = ReadSPI(CalAddr::FACT_RIGHT_DATA, 9, buffer);
+        }
+    }
+
+    if (result == DriverResult::Success) {
+        calibration.x.center = static_cast<u16>(((buffer[1] & 0x0F) << 8) | buffer[0]);
+        calibration.y.center = static_cast<u16>((buffer[2] << 4) | (buffer[1] >> 4));
+        calibration.x.min = static_cast<u16>(((buffer[4] & 0x0F) << 8) | buffer[3]);
+        calibration.y.min = static_cast<u16>((buffer[5] << 4) | (buffer[4] >> 4));
+        calibration.x.max = static_cast<u16>(((buffer[7] & 0x0F) << 8) | buffer[6]);
+        calibration.y.max = static_cast<u16>((buffer[8] << 4) | (buffer[7] >> 4));
+    }
+
+    // Nintendo fix for drifting stick
+    // buffer = ReadSPI(0x60, 0x98 , 16);
+    // joystick.deadzone = (u16)((buffer[4] << 8) & 0xF00 | buffer[3]);
+
+    // Set a valid default calibration if data is missing
+    ValidateCalibration(calibration);
+
+    return result;
+}
+
+DriverResult CalibrationProtocol::GetImuCalibration(MotionCalibration& calibration) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> buffer;
+    DriverResult result{DriverResult::Success};
+    calibration = {};
+
+    result = ReadSPI(CalAddr::USER_IMU_MAGIC, sizeof(u16), buffer);
+
+    if (result == DriverResult::Success) {
+        const bool has_user_calibration = buffer[0] == 0xB2 && buffer[1] == 0xA1;
+        if (has_user_calibration) {
+            result = ReadSPI(CalAddr::USER_IMU_DATA, sizeof(IMUCalibration), buffer);
+        } else {
+            result = ReadSPI(CalAddr::FACT_IMU_DATA, sizeof(IMUCalibration), buffer);
+        }
+    }
+
+    if (result == DriverResult::Success) {
+        IMUCalibration device_calibration{};
+        memcpy(&device_calibration, buffer.data(), sizeof(IMUCalibration));
+        calibration.accelerometer[0].offset = device_calibration.accelerometer_offset[0];
+        calibration.accelerometer[1].offset = device_calibration.accelerometer_offset[1];
+        calibration.accelerometer[2].offset = device_calibration.accelerometer_offset[2];
+
+        calibration.accelerometer[0].scale = device_calibration.accelerometer_scale[0];
+        calibration.accelerometer[1].scale = device_calibration.accelerometer_scale[1];
+        calibration.accelerometer[2].scale = device_calibration.accelerometer_scale[2];
+
+        calibration.gyro[0].offset = device_calibration.gyroscope_offset[0];
+        calibration.gyro[1].offset = device_calibration.gyroscope_offset[1];
+        calibration.gyro[2].offset = device_calibration.gyroscope_offset[2];
+
+        calibration.gyro[0].scale = device_calibration.gyroscope_scale[0];
+        calibration.gyro[1].scale = device_calibration.gyroscope_scale[1];
+        calibration.gyro[2].scale = device_calibration.gyroscope_scale[2];
+    }
+
+    ValidateCalibration(calibration);
+
+    return result;
+}
+
+DriverResult CalibrationProtocol::GetRingCalibration(RingCalibration& calibration,
+                                                     s16 current_value) {
+    // TODO: Get default calibration form ring itself
+    if (ring_data_max == 0 && ring_data_min == 0) {
+        ring_data_max = current_value + 800;
+        ring_data_min = current_value - 800;
+        ring_data_default = current_value;
+    }
+    ring_data_max = std::max(ring_data_max, current_value);
+    ring_data_min = std::min(ring_data_min, current_value);
+    calibration = {
+        .default_value = ring_data_default,
+        .max_value = ring_data_max,
+        .min_value = ring_data_min,
+    };
+    return DriverResult::Success;
+}
+
+void CalibrationProtocol::ValidateCalibration(JoyStickCalibration& calibration) {
+    constexpr u16 DefaultStickCenter{2048};
+    constexpr u16 DefaultStickRange{1740};
+
+    if (calibration.x.center == 0xFFF || calibration.x.center == 0) {
+        calibration.x.center = DefaultStickCenter;
+    }
+    if (calibration.x.max == 0xFFF || calibration.x.max == 0) {
+        calibration.x.max = DefaultStickRange;
+    }
+    if (calibration.x.min == 0xFFF || calibration.x.min == 0) {
+        calibration.x.min = DefaultStickRange;
+    }
+
+    if (calibration.y.center == 0xFFF || calibration.y.center == 0) {
+        calibration.y.center = DefaultStickCenter;
+    }
+    if (calibration.y.max == 0xFFF || calibration.y.max == 0) {
+        calibration.y.max = DefaultStickRange;
+    }
+    if (calibration.y.min == 0xFFF || calibration.y.min == 0) {
+        calibration.y.min = DefaultStickRange;
+    }
+}
+
+void CalibrationProtocol::ValidateCalibration(MotionCalibration& calibration) {
+    for (auto& sensor : calibration.accelerometer) {
+        if (sensor.scale == 0) {
+            sensor.scale = 0x4000;
+        }
+    }
+    for (auto& sensor : calibration.gyro) {
+        if (sensor.scale == 0) {
+            sensor.scale = 0x3be7;
+        }
+    }
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/calibration.h b/src/input_common/helpers/joycon_protocol/calibration.h
new file mode 100644
index 000000000..afb52a36a
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/calibration.h
@@ -0,0 +1,64 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+
+namespace InputCommon::Joycon {
+enum class DriverResult;
+struct JoyStickCalibration;
+struct IMUCalibration;
+struct JoyconHandle;
+} // namespace InputCommon::Joycon
+
+namespace InputCommon::Joycon {
+
+/// Driver functions related to retrieving calibration data from the device
+class CalibrationProtocol final : private JoyconCommonProtocol {
+public:
+    explicit CalibrationProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    /**
+     * Sends a request to obtain the left stick calibration from memory
+     * @param is_factory_calibration if true factory values will be returned
+     * @returns JoyStickCalibration of the left joystick
+     */
+    DriverResult GetLeftJoyStickCalibration(JoyStickCalibration& calibration);
+
+    /**
+     * Sends a request to obtain the right stick calibration from memory
+     * @param is_factory_calibration if true factory values will be returned
+     * @returns JoyStickCalibration of the right joystick
+     */
+    DriverResult GetRightJoyStickCalibration(JoyStickCalibration& calibration);
+
+    /**
+     * Sends a request to obtain the motion calibration from memory
+     * @returns ImuCalibration of the motion sensor
+     */
+    DriverResult GetImuCalibration(MotionCalibration& calibration);
+
+    /**
+     * Calculates on run time the proper calibration of the ring controller
+     * @returns RingCalibration of the ring sensor
+     */
+    DriverResult GetRingCalibration(RingCalibration& calibration, s16 current_value);
+
+private:
+    void ValidateCalibration(JoyStickCalibration& calibration);
+    void ValidateCalibration(MotionCalibration& calibration);
+
+    s16 ring_data_max = 0;
+    s16 ring_data_default = 0;
+    s16 ring_data_min = 0;
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/common_protocol.cpp b/src/input_common/helpers/joycon_protocol/common_protocol.cpp
new file mode 100644
index 000000000..417d0dcc5
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/common_protocol.cpp
@@ -0,0 +1,299 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+
+namespace InputCommon::Joycon {
+JoyconCommonProtocol::JoyconCommonProtocol(std::shared_ptr<JoyconHandle> hidapi_handle_)
+    : hidapi_handle{std::move(hidapi_handle_)} {}
+
+u8 JoyconCommonProtocol::GetCounter() {
+    hidapi_handle->packet_counter = (hidapi_handle->packet_counter + 1) & 0x0F;
+    return hidapi_handle->packet_counter;
+}
+
+void JoyconCommonProtocol::SetBlocking() {
+    SDL_hid_set_nonblocking(hidapi_handle->handle, 0);
+}
+
+void JoyconCommonProtocol::SetNonBlocking() {
+    SDL_hid_set_nonblocking(hidapi_handle->handle, 1);
+}
+
+DriverResult JoyconCommonProtocol::GetDeviceType(ControllerType& controller_type) {
+    std::vector<u8> buffer;
+    const auto result = ReadSPI(CalAddr::DEVICE_TYPE, 1, buffer);
+    controller_type = ControllerType::None;
+
+    if (result == DriverResult::Success) {
+        controller_type = static_cast<ControllerType>(buffer[0]);
+        // Fallback to 3rd party pro controllers
+        if (controller_type == ControllerType::None) {
+            controller_type = ControllerType::Pro;
+        }
+    }
+
+    return result;
+}
+
+DriverResult JoyconCommonProtocol::CheckDeviceAccess(SDL_hid_device_info* device_info) {
+    ControllerType controller_type{ControllerType::None};
+    const auto result = GetDeviceType(controller_type);
+    if (result != DriverResult::Success || controller_type == ControllerType::None) {
+        return DriverResult::UnsupportedControllerType;
+    }
+
+    hidapi_handle->handle =
+        SDL_hid_open(device_info->vendor_id, device_info->product_id, device_info->serial_number);
+
+    if (!hidapi_handle->handle) {
+        LOG_ERROR(Input, "Yuzu can't gain access to this device: ID {:04X}:{:04X}.",
+                  device_info->vendor_id, device_info->product_id);
+        return DriverResult::HandleInUse;
+    }
+
+    SetNonBlocking();
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::SetReportMode(ReportMode report_mode) {
+    const std::array<u8, 1> buffer{static_cast<u8>(report_mode)};
+    return SendSubCommand(SubCommand::SET_REPORT_MODE, buffer);
+}
+
+DriverResult JoyconCommonProtocol::SendData(std::span<const u8> buffer) {
+    const auto result = SDL_hid_write(hidapi_handle->handle, buffer.data(), buffer.size());
+
+    if (result == -1) {
+        return DriverResult::ErrorWritingData;
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::GetSubCommandResponse(SubCommand sc, std::vector<u8>& output) {
+    constexpr int timeout_mili = 66;
+    constexpr int MaxTries = 15;
+    int tries = 0;
+    output.resize(MaxSubCommandResponseSize);
+
+    do {
+        int result = SDL_hid_read_timeout(hidapi_handle->handle, output.data(),
+                                          MaxSubCommandResponseSize, timeout_mili);
+
+        if (result < 1) {
+            LOG_ERROR(Input, "No response from joycon");
+        }
+        if (tries++ > MaxTries) {
+            return DriverResult::Timeout;
+        }
+    } while (output[0] != 0x21 && output[14] != static_cast<u8>(sc));
+
+    if (output[0] != 0x21 && output[14] != static_cast<u8>(sc)) {
+        return DriverResult::WrongReply;
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::SendSubCommand(SubCommand sc, std::span<const u8> buffer,
+                                                  std::vector<u8>& output) {
+    std::vector<u8> local_buffer(MaxResponseSize);
+
+    local_buffer[0] = static_cast<u8>(OutputReport::RUMBLE_AND_SUBCMD);
+    local_buffer[1] = GetCounter();
+    local_buffer[10] = static_cast<u8>(sc);
+    for (std::size_t i = 0; i < buffer.size(); ++i) {
+        local_buffer[11 + i] = buffer[i];
+    }
+
+    auto result = SendData(local_buffer);
+
+    if (result != DriverResult::Success) {
+        return result;
+    }
+
+    result = GetSubCommandResponse(sc, output);
+
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::SendSubCommand(SubCommand sc, std::span<const u8> buffer) {
+    std::vector<u8> output;
+    return SendSubCommand(sc, buffer, output);
+}
+
+DriverResult JoyconCommonProtocol::SendMCUCommand(SubCommand sc, std::span<const u8> buffer) {
+    std::vector<u8> local_buffer(MaxResponseSize);
+
+    local_buffer[0] = static_cast<u8>(OutputReport::MCU_DATA);
+    local_buffer[1] = GetCounter();
+    local_buffer[10] = static_cast<u8>(sc);
+    for (std::size_t i = 0; i < buffer.size(); ++i) {
+        local_buffer[11 + i] = buffer[i];
+    }
+
+    return SendData(local_buffer);
+}
+
+DriverResult JoyconCommonProtocol::SendVibrationReport(std::span<const u8> buffer) {
+    std::vector<u8> local_buffer(MaxResponseSize);
+
+    local_buffer[0] = static_cast<u8>(Joycon::OutputReport::RUMBLE_ONLY);
+    local_buffer[1] = GetCounter();
+
+    memcpy(local_buffer.data() + 2, buffer.data(), buffer.size());
+
+    return SendData(local_buffer);
+}
+
+DriverResult JoyconCommonProtocol::ReadSPI(CalAddr addr, u8 size, std::vector<u8>& output) {
+    constexpr std::size_t MaxTries = 10;
+    std::size_t tries = 0;
+    std::array<u8, 5> buffer = {0x00, 0x00, 0x00, 0x00, size};
+    std::vector<u8> local_buffer(size + 20);
+
+    buffer[0] = static_cast<u8>(static_cast<u16>(addr) & 0x00FF);
+    buffer[1] = static_cast<u8>((static_cast<u16>(addr) & 0xFF00) >> 8);
+    do {
+        const auto result = SendSubCommand(SubCommand::SPI_FLASH_READ, buffer, local_buffer);
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if (tries++ > MaxTries) {
+            return DriverResult::Timeout;
+        }
+    } while (local_buffer[15] != buffer[0] || local_buffer[16] != buffer[1]);
+
+    // Remove header from output
+    output = std::vector<u8>(local_buffer.begin() + 20, local_buffer.begin() + 20 + size);
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::EnableMCU(bool enable) {
+    const std::array<u8, 1> mcu_state{static_cast<u8>(enable ? 1 : 0)};
+    const auto result = SendSubCommand(SubCommand::SET_MCU_STATE, mcu_state);
+
+    if (result != DriverResult::Success) {
+        LOG_ERROR(Input, "SendMCUData failed with error {}", result);
+    }
+
+    return result;
+}
+
+DriverResult JoyconCommonProtocol::ConfigureMCU(const MCUConfig& config) {
+    LOG_DEBUG(Input, "ConfigureMCU");
+    std::array<u8, sizeof(MCUConfig)> config_buffer;
+    memcpy(config_buffer.data(), &config, sizeof(MCUConfig));
+    config_buffer[37] = CalculateMCU_CRC8(config_buffer.data() + 1, 36);
+
+    const auto result = SendSubCommand(SubCommand::SET_MCU_CONFIG, config_buffer);
+
+    if (result != DriverResult::Success) {
+        LOG_ERROR(Input, "Set MCU config failed with error {}", result);
+    }
+
+    return result;
+}
+
+DriverResult JoyconCommonProtocol::GetMCUDataResponse(ReportMode report_mode_,
+                                                      std::vector<u8>& output) {
+    const int report_mode = static_cast<u8>(report_mode_);
+    constexpr int TimeoutMili = 200;
+    constexpr int MaxTries = 9;
+    int tries = 0;
+    output.resize(0x170);
+
+    do {
+        int result = SDL_hid_read_timeout(hidapi_handle->handle, output.data(), 0x170, TimeoutMili);
+
+        if (result < 1) {
+            LOG_ERROR(Input, "No response from joycon attempt {}", tries);
+        }
+        if (tries++ > MaxTries) {
+            return DriverResult::Timeout;
+        }
+    } while (output[0] != report_mode || output[49] == 0xFF);
+
+    if (output[0] != report_mode || output[49] == 0xFF) {
+        return DriverResult::WrongReply;
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::SendMCUData(ReportMode report_mode, SubCommand sc,
+                                               std::span<const u8> buffer,
+                                               std::vector<u8>& output) {
+    std::vector<u8> local_buffer(MaxResponseSize);
+
+    local_buffer[0] = static_cast<u8>(OutputReport::MCU_DATA);
+    local_buffer[1] = GetCounter();
+    local_buffer[9] = static_cast<u8>(sc);
+    for (std::size_t i = 0; i < buffer.size(); ++i) {
+        local_buffer[10 + i] = buffer[i];
+    }
+
+    auto result = SendData(local_buffer);
+
+    if (result != DriverResult::Success) {
+        return result;
+    }
+
+    result = GetMCUDataResponse(report_mode, output);
+
+    return DriverResult::Success;
+}
+
+DriverResult JoyconCommonProtocol::WaitSetMCUMode(ReportMode report_mode, MCUMode mode) {
+    std::vector<u8> output;
+    constexpr std::size_t MaxTries{8};
+    std::size_t tries{};
+
+    do {
+        const std::vector<u8> mcu_data{static_cast<u8>(MCUMode::Standby)};
+        const auto result = SendMCUData(report_mode, SubCommand::STATE, mcu_data, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if (tries++ > MaxTries) {
+            return DriverResult::WrongReply;
+        }
+    } while (output[49] != 1 || output[56] != static_cast<u8>(mode));
+
+    return DriverResult::Success;
+}
+
+// crc-8-ccitt / polynomial 0x07 look up table
+constexpr std::array<u8, 256> mcu_crc8_table = {
+    0x00, 0x07, 0x0E, 0x09, 0x1C, 0x1B, 0x12, 0x15, 0x38, 0x3F, 0x36, 0x31, 0x24, 0x23, 0x2A, 0x2D,
+    0x70, 0x77, 0x7E, 0x79, 0x6C, 0x6B, 0x62, 0x65, 0x48, 0x4F, 0x46, 0x41, 0x54, 0x53, 0x5A, 0x5D,
+    0xE0, 0xE7, 0xEE, 0xE9, 0xFC, 0xFB, 0xF2, 0xF5, 0xD8, 0xDF, 0xD6, 0xD1, 0xC4, 0xC3, 0xCA, 0xCD,
+    0x90, 0x97, 0x9E, 0x99, 0x8C, 0x8B, 0x82, 0x85, 0xA8, 0xAF, 0xA6, 0xA1, 0xB4, 0xB3, 0xBA, 0xBD,
+    0xC7, 0xC0, 0xC9, 0xCE, 0xDB, 0xDC, 0xD5, 0xD2, 0xFF, 0xF8, 0xF1, 0xF6, 0xE3, 0xE4, 0xED, 0xEA,
+    0xB7, 0xB0, 0xB9, 0xBE, 0xAB, 0xAC, 0xA5, 0xA2, 0x8F, 0x88, 0x81, 0x86, 0x93, 0x94, 0x9D, 0x9A,
+    0x27, 0x20, 0x29, 0x2E, 0x3B, 0x3C, 0x35, 0x32, 0x1F, 0x18, 0x11, 0x16, 0x03, 0x04, 0x0D, 0x0A,
+    0x57, 0x50, 0x59, 0x5E, 0x4B, 0x4C, 0x45, 0x42, 0x6F, 0x68, 0x61, 0x66, 0x73, 0x74, 0x7D, 0x7A,
+    0x89, 0x8E, 0x87, 0x80, 0x95, 0x92, 0x9B, 0x9C, 0xB1, 0xB6, 0xBF, 0xB8, 0xAD, 0xAA, 0xA3, 0xA4,
+    0xF9, 0xFE, 0xF7, 0xF0, 0xE5, 0xE2, 0xEB, 0xEC, 0xC1, 0xC6, 0xCF, 0xC8, 0xDD, 0xDA, 0xD3, 0xD4,
+    0x69, 0x6E, 0x67, 0x60, 0x75, 0x72, 0x7B, 0x7C, 0x51, 0x56, 0x5F, 0x58, 0x4D, 0x4A, 0x43, 0x44,
+    0x19, 0x1E, 0x17, 0x10, 0x05, 0x02, 0x0B, 0x0C, 0x21, 0x26, 0x2F, 0x28, 0x3D, 0x3A, 0x33, 0x34,
+    0x4E, 0x49, 0x40, 0x47, 0x52, 0x55, 0x5C, 0x5B, 0x76, 0x71, 0x78, 0x7F, 0x6A, 0x6D, 0x64, 0x63,
+    0x3E, 0x39, 0x30, 0x37, 0x22, 0x25, 0x2C, 0x2B, 0x06, 0x01, 0x08, 0x0F, 0x1A, 0x1D, 0x14, 0x13,
+    0xAE, 0xA9, 0xA0, 0xA7, 0xB2, 0xB5, 0xBC, 0xBB, 0x96, 0x91, 0x98, 0x9F, 0x8A, 0x8D, 0x84, 0x83,
+    0xDE, 0xD9, 0xD0, 0xD7, 0xC2, 0xC5, 0xCC, 0xCB, 0xE6, 0xE1, 0xE8, 0xEF, 0xFA, 0xFD, 0xF4, 0xF3};
+
+u8 JoyconCommonProtocol::CalculateMCU_CRC8(u8* buffer, u8 size) const {
+    u8 crc8 = 0x0;
+
+    for (int i = 0; i < size; ++i) {
+        crc8 = mcu_crc8_table[static_cast<u8>(crc8 ^ buffer[i])];
+    }
+    return crc8;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/common_protocol.h b/src/input_common/helpers/joycon_protocol/common_protocol.h
new file mode 100644
index 000000000..903bcf402
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/common_protocol.h
@@ -0,0 +1,173 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <memory>
+#include <span>
+#include <vector>
+
+#include "common/common_types.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+/// Joycon driver functions that handle low level communication
+class JoyconCommonProtocol {
+public:
+    explicit JoyconCommonProtocol(std::shared_ptr<JoyconHandle> hidapi_handle_);
+
+    /**
+     * Sets handle to blocking. In blocking mode, SDL_hid_read() will wait (block) until there is
+     * data to read before returning.
+     */
+    void SetBlocking();
+
+    /**
+     * Sets handle to non blocking. In non-blocking mode calls to SDL_hid_read() will return
+     * immediately with a value of 0 if there is no data to be read
+     */
+    void SetNonBlocking();
+
+    /**
+     * Sends a request to obtain the joycon type from device
+     * @returns controller type of the joycon
+     */
+    DriverResult GetDeviceType(ControllerType& controller_type);
+
+    /**
+     * Verifies and sets the joycon_handle if device is valid
+     * @param device info from the driver
+     * @returns success if the device is valid
+     */
+    DriverResult CheckDeviceAccess(SDL_hid_device_info* device);
+
+    /**
+     * Sends a request to set the polling mode of the joycon
+     * @param report_mode polling mode to be set
+     */
+    DriverResult SetReportMode(Joycon::ReportMode report_mode);
+
+    /**
+     * Sends data to the joycon device
+     * @param buffer data to be send
+     */
+    DriverResult SendData(std::span<const u8> buffer);
+
+    /**
+     * Waits for incoming data of the joycon device that matchs the subcommand
+     * @param sub_command type of data to be returned
+     * @returns a buffer containing the responce
+     */
+    DriverResult GetSubCommandResponse(SubCommand sub_command, std::vector<u8>& output);
+
+    /**
+     * Sends a sub command to the device and waits for it's reply
+     * @param sc sub command to be send
+     * @param buffer data to be send
+     * @returns output buffer containing the responce
+     */
+    DriverResult SendSubCommand(SubCommand sc, std::span<const u8> buffer, std::vector<u8>& output);
+
+    /**
+     * Sends a sub command to the device and waits for it's reply and ignores the output
+     * @param sc sub command to be send
+     * @param buffer data to be send
+     */
+    DriverResult SendSubCommand(SubCommand sc, std::span<const u8> buffer);
+
+    /**
+     * Sends a mcu command to the device
+     * @param sc sub command to be send
+     * @param buffer data to be send
+     */
+    DriverResult SendMCUCommand(SubCommand sc, std::span<const u8> buffer);
+
+    /**
+     * Sends vibration data to the joycon
+     * @param buffer data to be send
+     */
+    DriverResult SendVibrationReport(std::span<const u8> buffer);
+
+    /**
+     * Reads the SPI memory stored on the joycon
+     * @param Initial address location
+     * @param size in bytes to be read
+     * @returns output buffer containing the responce
+     */
+    DriverResult ReadSPI(CalAddr addr, u8 size, std::vector<u8>& output);
+
+    /**
+     * Enables MCU chip on the joycon
+     * @param enable if true the chip will be enabled
+     */
+    DriverResult EnableMCU(bool enable);
+
+    /**
+     * Configures the MCU to the correspoinding mode
+     * @param MCUConfig configuration
+     */
+    DriverResult ConfigureMCU(const MCUConfig& config);
+
+    /**
+     * Waits until there's MCU data available. On timeout returns error
+     * @param report mode of the expected reply
+     * @returns a buffer containing the responce
+     */
+    DriverResult GetMCUDataResponse(ReportMode report_mode_, std::vector<u8>& output);
+
+    /**
+     * Sends data to the MCU chip and waits for it's reply
+     * @param report mode of the expected reply
+     * @param sub command to be send
+     * @param buffer data to be send
+     * @returns output buffer containing the responce
+     */
+    DriverResult SendMCUData(ReportMode report_mode, SubCommand sc, std::span<const u8> buffer,
+                             std::vector<u8>& output);
+
+    /**
+     * Wait's until the MCU chip is on the specified mode
+     * @param report mode of the expected reply
+     * @param MCUMode configuration
+     */
+    DriverResult WaitSetMCUMode(ReportMode report_mode, MCUMode mode);
+
+    /**
+     * Calculates the checksum from the MCU data
+     * @param buffer containing the data to be send
+     * @param size of the buffer in bytes
+     * @returns byte with the correct checksum
+     */
+    u8 CalculateMCU_CRC8(u8* buffer, u8 size) const;
+
+private:
+    /**
+     * Increments and returns the packet counter of the handle
+     * @param joycon_handle device to send the data
+     * @returns packet counter value
+     */
+    u8 GetCounter();
+
+    std::shared_ptr<JoyconHandle> hidapi_handle;
+};
+
+class ScopedSetBlocking {
+public:
+    explicit ScopedSetBlocking(JoyconCommonProtocol* self) : m_self{self} {
+        m_self->SetBlocking();
+    }
+
+    ~ScopedSetBlocking() {
+        m_self->SetNonBlocking();
+    }
+
+private:
+    JoyconCommonProtocol* m_self{};
+};
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/generic_functions.cpp b/src/input_common/helpers/joycon_protocol/generic_functions.cpp
new file mode 100644
index 000000000..52bb8b61a
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/generic_functions.cpp
@@ -0,0 +1,125 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/generic_functions.h"
+
+namespace InputCommon::Joycon {
+
+GenericProtocol::GenericProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult GenericProtocol::EnablePassiveMode() {
+    ScopedSetBlocking sb(this);
+    return SetReportMode(ReportMode::SIMPLE_HID_MODE);
+}
+
+DriverResult GenericProtocol::EnableActiveMode() {
+    ScopedSetBlocking sb(this);
+    return SetReportMode(ReportMode::STANDARD_FULL_60HZ);
+}
+
+DriverResult GenericProtocol::GetDeviceInfo(DeviceInfo& device_info) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> output;
+
+    const auto result = SendSubCommand(SubCommand::REQ_DEV_INFO, {}, output);
+
+    device_info = {};
+    if (result == DriverResult::Success) {
+        memcpy(&device_info, output.data(), sizeof(DeviceInfo));
+    }
+
+    return result;
+}
+
+DriverResult GenericProtocol::GetControllerType(ControllerType& controller_type) {
+    return GetDeviceType(controller_type);
+}
+
+DriverResult GenericProtocol::EnableImu(bool enable) {
+    ScopedSetBlocking sb(this);
+    const std::array<u8, 1> buffer{static_cast<u8>(enable ? 1 : 0)};
+    return SendSubCommand(SubCommand::ENABLE_IMU, buffer);
+}
+
+DriverResult GenericProtocol::SetImuConfig(GyroSensitivity gsen, GyroPerformance gfrec,
+                                           AccelerometerSensitivity asen,
+                                           AccelerometerPerformance afrec) {
+    ScopedSetBlocking sb(this);
+    const std::array<u8, 4> buffer{static_cast<u8>(gsen), static_cast<u8>(asen),
+                                   static_cast<u8>(gfrec), static_cast<u8>(afrec)};
+    return SendSubCommand(SubCommand::SET_IMU_SENSITIVITY, buffer);
+}
+
+DriverResult GenericProtocol::GetBattery(u32& battery_level) {
+    // This function is meant to request the high resolution battery status
+    battery_level = 0;
+    return DriverResult::NotSupported;
+}
+
+DriverResult GenericProtocol::GetColor(Color& color) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> buffer;
+    const auto result = ReadSPI(CalAddr::COLOR_DATA, 12, buffer);
+
+    color = {};
+    if (result == DriverResult::Success) {
+        color.body = static_cast<u32>((buffer[0] << 16) | (buffer[1] << 8) | buffer[2]);
+        color.buttons = static_cast<u32>((buffer[3] << 16) | (buffer[4] << 8) | buffer[5]);
+        color.left_grip = static_cast<u32>((buffer[6] << 16) | (buffer[7] << 8) | buffer[8]);
+        color.right_grip = static_cast<u32>((buffer[9] << 16) | (buffer[10] << 8) | buffer[11]);
+    }
+
+    return result;
+}
+
+DriverResult GenericProtocol::GetSerialNumber(SerialNumber& serial_number) {
+    ScopedSetBlocking sb(this);
+    std::vector<u8> buffer;
+    const auto result = ReadSPI(CalAddr::SERIAL_NUMBER, 16, buffer);
+
+    serial_number = {};
+    if (result == DriverResult::Success) {
+        memcpy(serial_number.data(), buffer.data() + 1, sizeof(SerialNumber));
+    }
+
+    return result;
+}
+
+DriverResult GenericProtocol::GetTemperature(u32& temperature) {
+    // Not all devices have temperature sensor
+    temperature = 25;
+    return DriverResult::NotSupported;
+}
+
+DriverResult GenericProtocol::GetVersionNumber(FirmwareVersion& version) {
+    DeviceInfo device_info{};
+
+    const auto result = GetDeviceInfo(device_info);
+    version = device_info.firmware;
+
+    return result;
+}
+
+DriverResult GenericProtocol::SetHomeLight() {
+    ScopedSetBlocking sb(this);
+    static constexpr std::array<u8, 3> buffer{0x0f, 0xf0, 0x00};
+    return SendSubCommand(SubCommand::SET_HOME_LIGHT, buffer);
+}
+
+DriverResult GenericProtocol::SetLedBusy() {
+    return DriverResult::NotSupported;
+}
+
+DriverResult GenericProtocol::SetLedPattern(u8 leds) {
+    ScopedSetBlocking sb(this);
+    const std::array<u8, 1> buffer{leds};
+    return SendSubCommand(SubCommand::SET_PLAYER_LIGHTS, buffer);
+}
+
+DriverResult GenericProtocol::SetLedBlinkPattern(u8 leds) {
+    return SetLedPattern(static_cast<u8>(leds << 4));
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/generic_functions.h b/src/input_common/helpers/joycon_protocol/generic_functions.h
new file mode 100644
index 000000000..239bb7dbf
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/generic_functions.h
@@ -0,0 +1,108 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+/// Joycon driver functions that easily implemented
+class GenericProtocol final : private JoyconCommonProtocol {
+public:
+    explicit GenericProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    /// Enables passive mode. This mode only sends button data on change. Sticks will return digital
+    /// data instead of analog. Motion will be disabled
+    DriverResult EnablePassiveMode();
+
+    /// Enables active mode. This mode will return the current status every 5-15ms
+    DriverResult EnableActiveMode();
+
+    /**
+     * Sends a request to obtain the joycon firmware and mac from handle
+     * @returns controller device info
+     */
+    DriverResult GetDeviceInfo(DeviceInfo& controller_type);
+
+    /**
+     * Sends a request to obtain the joycon type from handle
+     * @returns controller type of the joycon
+     */
+    DriverResult GetControllerType(ControllerType& controller_type);
+
+    /**
+     * Enables motion input
+     * @param enable if true motion data will be enabled
+     */
+    DriverResult EnableImu(bool enable);
+
+    /**
+     * Configures the motion sensor with the specified parameters
+     * @param gsen gyroscope sensor sensitvity in degrees per second
+     * @param gfrec gyroscope sensor frequency in hertz
+     * @param asen accelerometer sensitivity in G force
+     * @param afrec accelerometer frequency in hertz
+     */
+    DriverResult SetImuConfig(GyroSensitivity gsen, GyroPerformance gfrec,
+                              AccelerometerSensitivity asen, AccelerometerPerformance afrec);
+
+    /**
+     * Request battery level from the device
+     * @returns battery level
+     */
+    DriverResult GetBattery(u32& battery_level);
+
+    /**
+     * Request joycon colors from the device
+     * @returns colors of the body and buttons
+     */
+    DriverResult GetColor(Color& color);
+
+    /**
+     * Request joycon serial number from the device
+     * @returns 16 byte serial number
+     */
+    DriverResult GetSerialNumber(SerialNumber& serial_number);
+
+    /**
+     * Request joycon serial number from the device
+     * @returns 16 byte serial number
+     */
+    DriverResult GetTemperature(u32& temperature);
+
+    /**
+     * Request joycon serial number from the device
+     * @returns 16 byte serial number
+     */
+    DriverResult GetVersionNumber(FirmwareVersion& version);
+
+    /**
+     * Sets home led behaviour
+     */
+    DriverResult SetHomeLight();
+
+    /**
+     * Sets home led into a slow breathing state
+     */
+    DriverResult SetLedBusy();
+
+    /**
+     * Sets the 4 player leds on the joycon on a solid state
+     * @params bit flag containing the led state
+     */
+    DriverResult SetLedPattern(u8 leds);
+
+    /**
+     * Sets the 4 player leds on the joycon on a blinking state
+     * @returns bit flag containing the led state
+     */
+    DriverResult SetLedBlinkPattern(u8 leds);
+};
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/irs.cpp b/src/input_common/helpers/joycon_protocol/irs.cpp
new file mode 100644
index 000000000..09e17bc5b
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/irs.cpp
@@ -0,0 +1,298 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <thread>
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/irs.h"
+
+namespace InputCommon::Joycon {
+
+IrsProtocol::IrsProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult IrsProtocol::EnableIrs() {
+    LOG_INFO(Input, "Enable IRS");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = SetReportMode(ReportMode::NFC_IR_MODE_60HZ);
+    }
+    if (result == DriverResult::Success) {
+        result = EnableMCU(true);
+    }
+    if (result == DriverResult::Success) {
+        result = WaitSetMCUMode(ReportMode::NFC_IR_MODE_60HZ, MCUMode::Standby);
+    }
+    if (result == DriverResult::Success) {
+        const MCUConfig config{
+            .command = MCUCommand::ConfigureMCU,
+            .sub_command = MCUSubCommand::SetMCUMode,
+            .mode = MCUMode::IR,
+            .crc = {},
+        };
+
+        result = ConfigureMCU(config);
+    }
+    if (result == DriverResult::Success) {
+        result = WaitSetMCUMode(ReportMode::NFC_IR_MODE_60HZ, MCUMode::IR);
+    }
+    if (result == DriverResult::Success) {
+        result = ConfigureIrs();
+    }
+    if (result == DriverResult::Success) {
+        result = WriteRegistersStep1();
+    }
+    if (result == DriverResult::Success) {
+        result = WriteRegistersStep2();
+    }
+
+    is_enabled = true;
+
+    return result;
+}
+
+DriverResult IrsProtocol::DisableIrs() {
+    LOG_DEBUG(Input, "Disable IRS");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = EnableMCU(false);
+    }
+
+    is_enabled = false;
+
+    return result;
+}
+
+DriverResult IrsProtocol::SetIrsConfig(IrsMode mode, IrsResolution format) {
+    irs_mode = mode;
+    switch (format) {
+    case IrsResolution::Size320x240:
+        resolution_code = IrsResolutionCode::Size320x240;
+        fragments = IrsFragments::Size320x240;
+        resolution = IrsResolution::Size320x240;
+        break;
+    case IrsResolution::Size160x120:
+        resolution_code = IrsResolutionCode::Size160x120;
+        fragments = IrsFragments::Size160x120;
+        resolution = IrsResolution::Size160x120;
+        break;
+    case IrsResolution::Size80x60:
+        resolution_code = IrsResolutionCode::Size80x60;
+        fragments = IrsFragments::Size80x60;
+        resolution = IrsResolution::Size80x60;
+        break;
+    case IrsResolution::Size20x15:
+        resolution_code = IrsResolutionCode::Size20x15;
+        fragments = IrsFragments::Size20x15;
+        resolution = IrsResolution::Size20x15;
+        break;
+    case IrsResolution::Size40x30:
+    default:
+        resolution_code = IrsResolutionCode::Size40x30;
+        fragments = IrsFragments::Size40x30;
+        resolution = IrsResolution::Size40x30;
+        break;
+    }
+
+    // Restart feature
+    if (is_enabled) {
+        DisableIrs();
+        return EnableIrs();
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult IrsProtocol::RequestImage(std::span<u8> buffer) {
+    const u8 next_packet_fragment =
+        static_cast<u8>((packet_fragment + 1) % (static_cast<u8>(fragments) + 1));
+
+    if (buffer[0] == 0x31 && buffer[49] == 0x03) {
+        u8 new_packet_fragment = buffer[52];
+        if (new_packet_fragment == next_packet_fragment) {
+            packet_fragment = next_packet_fragment;
+            memcpy(buf_image.data() + (300 * packet_fragment), buffer.data() + 59, 300);
+
+            return RequestFrame(packet_fragment);
+        }
+
+        if (new_packet_fragment == packet_fragment) {
+            return RequestFrame(packet_fragment);
+        }
+
+        return ResendFrame(next_packet_fragment);
+    }
+
+    return RequestFrame(packet_fragment);
+}
+
+DriverResult IrsProtocol::ConfigureIrs() {
+    LOG_DEBUG(Input, "Configure IRS");
+    constexpr std::size_t max_tries = 28;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    const IrsConfigure irs_configuration{
+        .command = MCUCommand::ConfigureIR,
+        .sub_command = MCUSubCommand::SetDeviceMode,
+        .irs_mode = IrsMode::ImageTransfer,
+        .number_of_fragments = fragments,
+        .mcu_major_version = 0x0500,
+        .mcu_minor_version = 0x1800,
+        .crc = {},
+    };
+    buf_image.resize((static_cast<u8>(fragments) + 1) * 300);
+
+    std::array<u8, sizeof(IrsConfigure)> request_data{};
+    memcpy(request_data.data(), &irs_configuration, sizeof(IrsConfigure));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    do {
+        const auto result = SendSubCommand(SubCommand::SET_MCU_CONFIG, request_data, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ >= max_tries) {
+            return DriverResult::WrongReply;
+        }
+    } while (output[15] != 0x0b);
+
+    return DriverResult::Success;
+}
+
+DriverResult IrsProtocol::WriteRegistersStep1() {
+    LOG_DEBUG(Input, "WriteRegistersStep1");
+    DriverResult result{DriverResult::Success};
+    constexpr std::size_t max_tries = 28;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    const IrsWriteRegisters irs_registers{
+        .command = MCUCommand::ConfigureIR,
+        .sub_command = MCUSubCommand::WriteDeviceRegisters,
+        .number_of_registers = 0x9,
+        .registers =
+            {
+                IrsRegister{IrRegistersAddress::Resolution, static_cast<u8>(resolution_code)},
+                {IrRegistersAddress::ExposureLSB, static_cast<u8>(exposure & 0xff)},
+                {IrRegistersAddress::ExposureMSB, static_cast<u8>(exposure >> 8)},
+                {IrRegistersAddress::ExposureTime, 0x00},
+                {IrRegistersAddress::Leds, static_cast<u8>(leds)},
+                {IrRegistersAddress::DigitalGainLSB, static_cast<u8>((digital_gain & 0x0f) << 4)},
+                {IrRegistersAddress::DigitalGainMSB, static_cast<u8>((digital_gain & 0xf0) >> 4)},
+                {IrRegistersAddress::LedFilter, static_cast<u8>(led_filter)},
+                {IrRegistersAddress::WhitePixelThreshold, 0xc8},
+            },
+        .crc = {},
+    };
+
+    std::array<u8, sizeof(IrsWriteRegisters)> request_data{};
+    memcpy(request_data.data(), &irs_registers, sizeof(IrsWriteRegisters));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+
+    std::array<u8, 38> mcu_request{0x02};
+    mcu_request[36] = CalculateMCU_CRC8(mcu_request.data(), 36);
+    mcu_request[37] = 0xFF;
+
+    if (result != DriverResult::Success) {
+        return result;
+    }
+
+    do {
+        result = SendSubCommand(SubCommand::SET_MCU_CONFIG, request_data, output);
+
+        // First time we need to set the report mode
+        if (result == DriverResult::Success && tries == 0) {
+            result = SendMCUCommand(SubCommand::SET_REPORT_MODE, mcu_request);
+        }
+        if (result == DriverResult::Success && tries == 0) {
+            GetSubCommandResponse(SubCommand::SET_MCU_CONFIG, output);
+        }
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ >= max_tries) {
+            return DriverResult::WrongReply;
+        }
+    } while (!(output[15] == 0x13 && output[17] == 0x07) && output[15] != 0x23);
+
+    return DriverResult::Success;
+}
+
+DriverResult IrsProtocol::WriteRegistersStep2() {
+    LOG_DEBUG(Input, "WriteRegistersStep2");
+    constexpr std::size_t max_tries = 28;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    const IrsWriteRegisters irs_registers{
+        .command = MCUCommand::ConfigureIR,
+        .sub_command = MCUSubCommand::WriteDeviceRegisters,
+        .number_of_registers = 0x8,
+        .registers =
+            {
+                IrsRegister{IrRegistersAddress::LedIntensitiyMSB,
+                            static_cast<u8>(led_intensity >> 8)},
+                {IrRegistersAddress::LedIntensitiyLSB, static_cast<u8>(led_intensity & 0xff)},
+                {IrRegistersAddress::ImageFlip, static_cast<u8>(image_flip)},
+                {IrRegistersAddress::DenoiseSmoothing, static_cast<u8>((denoise >> 16) & 0xff)},
+                {IrRegistersAddress::DenoiseEdge, static_cast<u8>((denoise >> 8) & 0xff)},
+                {IrRegistersAddress::DenoiseColor, static_cast<u8>(denoise & 0xff)},
+                {IrRegistersAddress::UpdateTime, 0x2d},
+                {IrRegistersAddress::FinalizeConfig, 0x01},
+            },
+        .crc = {},
+    };
+
+    std::array<u8, sizeof(IrsWriteRegisters)> request_data{};
+    memcpy(request_data.data(), &irs_registers, sizeof(IrsWriteRegisters));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    do {
+        const auto result = SendSubCommand(SubCommand::SET_MCU_CONFIG, request_data, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ >= max_tries) {
+            return DriverResult::WrongReply;
+        }
+    } while (output[15] != 0x13 && output[15] != 0x23);
+
+    return DriverResult::Success;
+}
+
+DriverResult IrsProtocol::RequestFrame(u8 frame) {
+    std::array<u8, 38> mcu_request{};
+    mcu_request[3] = frame;
+    mcu_request[36] = CalculateMCU_CRC8(mcu_request.data(), 36);
+    mcu_request[37] = 0xFF;
+    return SendMCUCommand(SubCommand::SET_REPORT_MODE, mcu_request);
+}
+
+DriverResult IrsProtocol::ResendFrame(u8 frame) {
+    std::array<u8, 38> mcu_request{};
+    mcu_request[1] = 0x1;
+    mcu_request[2] = frame;
+    mcu_request[3] = 0x0;
+    mcu_request[36] = CalculateMCU_CRC8(mcu_request.data(), 36);
+    mcu_request[37] = 0xFF;
+    return SendMCUCommand(SubCommand::SET_REPORT_MODE, mcu_request);
+}
+
+std::vector<u8> IrsProtocol::GetImage() const {
+    return buf_image;
+}
+
+IrsResolution IrsProtocol::GetIrsFormat() const {
+    return resolution;
+}
+
+bool IrsProtocol::IsEnabled() const {
+    return is_enabled;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/irs.h b/src/input_common/helpers/joycon_protocol/irs.h
new file mode 100644
index 000000000..76dfa02ea
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/irs.h
@@ -0,0 +1,63 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+class IrsProtocol final : private JoyconCommonProtocol {
+public:
+    explicit IrsProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    DriverResult EnableIrs();
+
+    DriverResult DisableIrs();
+
+    DriverResult SetIrsConfig(IrsMode mode, IrsResolution format);
+
+    DriverResult RequestImage(std::span<u8> buffer);
+
+    std::vector<u8> GetImage() const;
+
+    IrsResolution GetIrsFormat() const;
+
+    bool IsEnabled() const;
+
+private:
+    DriverResult ConfigureIrs();
+
+    DriverResult WriteRegistersStep1();
+    DriverResult WriteRegistersStep2();
+
+    DriverResult RequestFrame(u8 frame);
+    DriverResult ResendFrame(u8 frame);
+
+    IrsMode irs_mode{IrsMode::ImageTransfer};
+    IrsResolution resolution{IrsResolution::Size40x30};
+    IrsResolutionCode resolution_code{IrsResolutionCode::Size40x30};
+    IrsFragments fragments{IrsFragments::Size40x30};
+    IrLeds leds{IrLeds::BrightAndDim};
+    IrExLedFilter led_filter{IrExLedFilter::Enabled};
+    IrImageFlip image_flip{IrImageFlip::Normal};
+    u8 digital_gain{0x01};
+    u16 exposure{0x2490};
+    u16 led_intensity{0x0f10};
+    u32 denoise{0x012344};
+
+    u8 packet_fragment{};
+    std::vector<u8> buf_image; // 8bpp greyscale image.
+
+    bool is_enabled{};
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/joycon_types.h b/src/input_common/helpers/joycon_protocol/joycon_types.h
new file mode 100644
index 000000000..e2d47349f
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/joycon_types.h
@@ -0,0 +1,612 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <array>
+#include <functional>
+#include <SDL_hidapi.h>
+
+#include "common/bit_field.h"
+#include "common/common_funcs.h"
+#include "common/common_types.h"
+
+namespace InputCommon::Joycon {
+constexpr u32 MaxErrorCount = 50;
+constexpr u32 MaxBufferSize = 368;
+constexpr u32 MaxResponseSize = 49;
+constexpr u32 MaxSubCommandResponseSize = 64;
+constexpr std::array<u8, 8> DefaultVibrationBuffer{0x0, 0x1, 0x40, 0x40, 0x0, 0x1, 0x40, 0x40};
+
+using MacAddress = std::array<u8, 6>;
+using SerialNumber = std::array<u8, 15>;
+
+enum class ControllerType {
+    None,
+    Left,
+    Right,
+    Pro,
+    Grip,
+    Dual,
+};
+
+enum class PadAxes {
+    LeftStickX,
+    LeftStickY,
+    RightStickX,
+    RightStickY,
+    Undefined,
+};
+
+enum class PadMotion {
+    LeftMotion,
+    RightMotion,
+    Undefined,
+};
+
+enum class PadButton : u32 {
+    Down = 0x000001,
+    Up = 0x000002,
+    Right = 0x000004,
+    Left = 0x000008,
+    LeftSR = 0x000010,
+    LeftSL = 0x000020,
+    L = 0x000040,
+    ZL = 0x000080,
+    Y = 0x000100,
+    X = 0x000200,
+    B = 0x000400,
+    A = 0x000800,
+    RightSR = 0x001000,
+    RightSL = 0x002000,
+    R = 0x004000,
+    ZR = 0x008000,
+    Minus = 0x010000,
+    Plus = 0x020000,
+    StickR = 0x040000,
+    StickL = 0x080000,
+    Home = 0x100000,
+    Capture = 0x200000,
+};
+
+enum class PasivePadButton : u32 {
+    Down_A = 0x0001,
+    Right_X = 0x0002,
+    Left_B = 0x0004,
+    Up_Y = 0x0008,
+    SL = 0x0010,
+    SR = 0x0020,
+    Minus = 0x0100,
+    Plus = 0x0200,
+    StickL = 0x0400,
+    StickR = 0x0800,
+    Home = 0x1000,
+    Capture = 0x2000,
+    L_R = 0x4000,
+    ZL_ZR = 0x8000,
+};
+
+enum class OutputReport : u8 {
+    RUMBLE_AND_SUBCMD = 0x01,
+    FW_UPDATE_PKT = 0x03,
+    RUMBLE_ONLY = 0x10,
+    MCU_DATA = 0x11,
+    USB_CMD = 0x80,
+};
+
+enum class InputReport : u8 {
+    SUBCMD_REPLY = 0x21,
+    STANDARD_FULL_60HZ = 0x30,
+    NFC_IR_MODE_60HZ = 0x31,
+    SIMPLE_HID_MODE = 0x3F,
+    INPUT_USB_RESPONSE = 0x81,
+};
+
+enum class FeatureReport : u8 {
+    Last_SUBCMD = 0x02,
+    OTA_GW_UPGRADE = 0x70,
+    SETUP_MEM_READ = 0x71,
+    MEM_READ = 0x72,
+    ERASE_MEM_SECTOR = 0x73,
+    MEM_WRITE = 0x74,
+    LAUNCH = 0x75,
+};
+
+enum class SubCommand : u8 {
+    STATE = 0x00,
+    MANUAL_BT_PAIRING = 0x01,
+    REQ_DEV_INFO = 0x02,
+    SET_REPORT_MODE = 0x03,
+    TRIGGERS_ELAPSED = 0x04,
+    GET_PAGE_LIST_STATE = 0x05,
+    SET_HCI_STATE = 0x06,
+    RESET_PAIRING_INFO = 0x07,
+    LOW_POWER_MODE = 0x08,
+    SPI_FLASH_READ = 0x10,
+    SPI_FLASH_WRITE = 0x11,
+    RESET_MCU = 0x20,
+    SET_MCU_CONFIG = 0x21,
+    SET_MCU_STATE = 0x22,
+    SET_PLAYER_LIGHTS = 0x30,
+    GET_PLAYER_LIGHTS = 0x31,
+    SET_HOME_LIGHT = 0x38,
+    ENABLE_IMU = 0x40,
+    SET_IMU_SENSITIVITY = 0x41,
+    WRITE_IMU_REG = 0x42,
+    READ_IMU_REG = 0x43,
+    ENABLE_VIBRATION = 0x48,
+    GET_REGULATED_VOLTAGE = 0x50,
+    SET_EXTERNAL_CONFIG = 0x58,
+    UNKNOWN_RINGCON = 0x59,
+    UNKNOWN_RINGCON2 = 0x5A,
+    UNKNOWN_RINGCON3 = 0x5C,
+};
+
+enum class UsbSubCommand : u8 {
+    CONN_STATUS = 0x01,
+    HADSHAKE = 0x02,
+    BAUDRATE_3M = 0x03,
+    NO_TIMEOUT = 0x04,
+    EN_TIMEOUT = 0x05,
+    RESET = 0x06,
+    PRE_HANDSHAKE = 0x91,
+    SEND_UART = 0x92,
+};
+
+enum class CalMagic : u8 {
+    USR_MAGIC_0 = 0xB2,
+    USR_MAGIC_1 = 0xA1,
+    USRR_MAGI_SIZE = 2,
+};
+
+enum class CalAddr {
+    SERIAL_NUMBER = 0X6000,
+    DEVICE_TYPE = 0X6012,
+    COLOR_EXIST = 0X601B,
+    FACT_LEFT_DATA = 0X603d,
+    FACT_RIGHT_DATA = 0X6046,
+    COLOR_DATA = 0X6050,
+    FACT_IMU_DATA = 0X6020,
+    USER_LEFT_MAGIC = 0X8010,
+    USER_LEFT_DATA = 0X8012,
+    USER_RIGHT_MAGIC = 0X801B,
+    USER_RIGHT_DATA = 0X801D,
+    USER_IMU_MAGIC = 0X8026,
+    USER_IMU_DATA = 0X8028,
+};
+
+enum class ReportMode : u8 {
+    ACTIVE_POLLING_NFC_IR_CAMERA_DATA = 0x00,
+    ACTIVE_POLLING_NFC_IR_CAMERA_CONFIGURATION = 0x01,
+    ACTIVE_POLLING_NFC_IR_CAMERA_DATA_CONFIGURATION = 0x02,
+    ACTIVE_POLLING_IR_CAMERA_DATA = 0x03,
+    MCU_UPDATE_STATE = 0x23,
+    STANDARD_FULL_60HZ = 0x30,
+    NFC_IR_MODE_60HZ = 0x31,
+    SIMPLE_HID_MODE = 0x3F,
+};
+
+enum class GyroSensitivity : u8 {
+    DPS250,
+    DPS500,
+    DPS1000,
+    DPS2000, // Default
+};
+
+enum class AccelerometerSensitivity : u8 {
+    G8, // Default
+    G4,
+    G2,
+    G16,
+};
+
+enum class GyroPerformance : u8 {
+    HZ833,
+    HZ208, // Default
+};
+
+enum class AccelerometerPerformance : u8 {
+    HZ200,
+    HZ100, // Default
+};
+
+enum class MCUCommand : u8 {
+    ConfigureMCU = 0x21,
+    ConfigureIR = 0x23,
+};
+
+enum class MCUSubCommand : u8 {
+    SetMCUMode = 0x0,
+    SetDeviceMode = 0x1,
+    ReadDeviceMode = 0x02,
+    WriteDeviceRegisters = 0x4,
+};
+
+enum class MCUMode : u8 {
+    Suspend = 0,
+    Standby = 1,
+    Ringcon = 3,
+    NFC = 4,
+    IR = 5,
+    MaybeFWUpdate = 6,
+};
+
+enum class MCURequest : u8 {
+    GetMCUStatus = 1,
+    GetNFCData = 2,
+    GetIRData = 3,
+};
+
+enum class MCUReport : u8 {
+    Empty = 0x00,
+    StateReport = 0x01,
+    IRData = 0x03,
+    BusyInitializing = 0x0b,
+    IRStatus = 0x13,
+    IRRegisters = 0x1b,
+    NFCState = 0x2a,
+    NFCReadData = 0x3a,
+    EmptyAwaitingCmd = 0xff,
+};
+
+enum class MCUPacketFlag : u8 {
+    MorePacketsRemaining = 0x00,
+    LastCommandPacket = 0x08,
+};
+
+enum class NFCReadCommand : u8 {
+    CancelAll = 0x00,
+    StartPolling = 0x01,
+    StopPolling = 0x02,
+    StartWaitingRecieve = 0x04,
+    Ntag = 0x06,
+    Mifare = 0x0F,
+};
+
+enum class NFCTagType : u8 {
+    AllTags = 0x00,
+    Ntag215 = 0x01,
+};
+
+enum class NFCPages {
+    Block0 = 0,
+    Block45 = 45,
+    Block135 = 135,
+    Block231 = 231,
+};
+
+enum class NFCStatus : u8 {
+    LastPackage = 0x04,
+    TagLost = 0x07,
+};
+
+enum class IrsMode : u8 {
+    None = 0x02,
+    Moment = 0x03,
+    Dpd = 0x04,
+    Clustering = 0x06,
+    ImageTransfer = 0x07,
+    Silhouette = 0x08,
+    TeraImage = 0x09,
+    SilhouetteTeraImage = 0x0A,
+};
+
+enum class IrsResolution {
+    Size320x240,
+    Size160x120,
+    Size80x60,
+    Size40x30,
+    Size20x15,
+    None,
+};
+
+enum class IrsResolutionCode : u8 {
+    Size320x240 = 0x00, // Full pixel array
+    Size160x120 = 0x50, // Sensor Binning [2 X 2]
+    Size80x60 = 0x64,   // Sensor Binning [4 x 2] and Skipping [1 x 2]
+    Size40x30 = 0x69,   // Sensor Binning [4 x 2] and Skipping [2 x 4]
+    Size20x15 = 0x6A,   // Sensor Binning [4 x 2] and Skipping [4 x 4]
+};
+
+// Size of image divided by 300
+enum class IrsFragments : u8 {
+    Size20x15 = 0x00,
+    Size40x30 = 0x03,
+    Size80x60 = 0x0f,
+    Size160x120 = 0x3f,
+    Size320x240 = 0xFF,
+};
+
+enum class IrLeds : u8 {
+    BrightAndDim = 0x00,
+    Bright = 0x20,
+    Dim = 0x10,
+    None = 0x30,
+};
+
+enum class IrExLedFilter : u8 {
+    Disabled = 0x00,
+    Enabled = 0x03,
+};
+
+enum class IrImageFlip : u8 {
+    Normal = 0x00,
+    Inverted = 0x02,
+};
+
+enum class IrRegistersAddress : u16 {
+    UpdateTime = 0x0400,
+    FinalizeConfig = 0x0700,
+    LedFilter = 0x0e00,
+    Leds = 0x1000,
+    LedIntensitiyMSB = 0x1100,
+    LedIntensitiyLSB = 0x1200,
+    ImageFlip = 0x2d00,
+    Resolution = 0x2e00,
+    DigitalGainLSB = 0x2e01,
+    DigitalGainMSB = 0x2f01,
+    ExposureLSB = 0x3001,
+    ExposureMSB = 0x3101,
+    ExposureTime = 0x3201,
+    WhitePixelThreshold = 0x4301,
+    DenoiseSmoothing = 0x6701,
+    DenoiseEdge = 0x6801,
+    DenoiseColor = 0x6901,
+};
+
+enum class DriverResult {
+    Success,
+    WrongReply,
+    Timeout,
+    UnsupportedControllerType,
+    HandleInUse,
+    ErrorReadingData,
+    ErrorWritingData,
+    NoDeviceDetected,
+    InvalidHandle,
+    NotSupported,
+    Disabled,
+    Unknown,
+};
+
+struct MotionSensorCalibration {
+    s16 offset;
+    s16 scale;
+};
+
+struct MotionCalibration {
+    std::array<MotionSensorCalibration, 3> accelerometer;
+    std::array<MotionSensorCalibration, 3> gyro;
+};
+
+// Basic motion data containing data from the sensors and a timestamp in microseconds
+struct MotionData {
+    float gyro_x{};
+    float gyro_y{};
+    float gyro_z{};
+    float accel_x{};
+    float accel_y{};
+    float accel_z{};
+    u64 delta_timestamp{};
+};
+
+struct JoyStickAxisCalibration {
+    u16 max{1};
+    u16 min{1};
+    u16 center{0};
+};
+
+struct JoyStickCalibration {
+    JoyStickAxisCalibration x;
+    JoyStickAxisCalibration y;
+};
+
+struct RingCalibration {
+    s16 default_value;
+    s16 max_value;
+    s16 min_value;
+};
+
+struct Color {
+    u32 body;
+    u32 buttons;
+    u32 left_grip;
+    u32 right_grip;
+};
+
+struct Battery {
+    union {
+        u8 raw{};
+
+        BitField<0, 4, u8> unknown;
+        BitField<4, 1, u8> charging;
+        BitField<5, 3, u8> status;
+    };
+};
+
+struct VibrationValue {
+    f32 low_amplitude;
+    f32 low_frequency;
+    f32 high_amplitude;
+    f32 high_frequency;
+};
+
+struct JoyconHandle {
+    SDL_hid_device* handle = nullptr;
+    u8 packet_counter{};
+};
+
+struct MCUConfig {
+    MCUCommand command;
+    MCUSubCommand sub_command;
+    MCUMode mode;
+    INSERT_PADDING_BYTES(0x22);
+    u8 crc;
+};
+static_assert(sizeof(MCUConfig) == 0x26, "MCUConfig is an invalid size");
+
+#pragma pack(push, 1)
+struct InputReportPassive {
+    InputReport report_mode;
+    u16 button_input;
+    u8 stick_state;
+    std::array<u8, 10> unknown_data;
+};
+static_assert(sizeof(InputReportPassive) == 0xE, "InputReportPassive is an invalid size");
+
+struct InputReportActive {
+    InputReport report_mode;
+    u8 packet_id;
+    Battery battery_status;
+    std::array<u8, 3> button_input;
+    std::array<u8, 3> left_stick_state;
+    std::array<u8, 3> right_stick_state;
+    u8 vibration_code;
+    std::array<s16, 6 * 2> motion_input;
+    INSERT_PADDING_BYTES(0x2);
+    s16 ring_input;
+};
+static_assert(sizeof(InputReportActive) == 0x29, "InputReportActive is an invalid size");
+
+struct InputReportNfcIr {
+    InputReport report_mode;
+    u8 packet_id;
+    Battery battery_status;
+    std::array<u8, 3> button_input;
+    std::array<u8, 3> left_stick_state;
+    std::array<u8, 3> right_stick_state;
+    u8 vibration_code;
+    std::array<s16, 6 * 2> motion_input;
+    INSERT_PADDING_BYTES(0x4);
+};
+static_assert(sizeof(InputReportNfcIr) == 0x29, "InputReportNfcIr is an invalid size");
+#pragma pack(pop)
+
+struct IMUCalibration {
+    std::array<s16, 3> accelerometer_offset;
+    std::array<s16, 3> accelerometer_scale;
+    std::array<s16, 3> gyroscope_offset;
+    std::array<s16, 3> gyroscope_scale;
+};
+static_assert(sizeof(IMUCalibration) == 0x18, "IMUCalibration is an invalid size");
+
+struct NFCReadBlock {
+    u8 start;
+    u8 end;
+};
+static_assert(sizeof(NFCReadBlock) == 0x2, "NFCReadBlock is an invalid size");
+
+struct NFCReadBlockCommand {
+    u8 block_count{};
+    std::array<NFCReadBlock, 4> blocks{};
+};
+static_assert(sizeof(NFCReadBlockCommand) == 0x9, "NFCReadBlockCommand is an invalid size");
+
+struct NFCReadCommandData {
+    u8 unknown;
+    u8 uuid_length;
+    u8 unknown_2;
+    std::array<u8, 6> uid;
+    NFCTagType tag_type;
+    NFCReadBlockCommand read_block;
+};
+static_assert(sizeof(NFCReadCommandData) == 0x13, "NFCReadCommandData is an invalid size");
+
+struct NFCPollingCommandData {
+    u8 enable_mifare;
+    u8 unknown_1;
+    u8 unknown_2;
+    u8 unknown_3;
+    u8 unknown_4;
+};
+static_assert(sizeof(NFCPollingCommandData) == 0x05, "NFCPollingCommandData is an invalid size");
+
+struct NFCRequestState {
+    MCUSubCommand sub_command;
+    NFCReadCommand command_argument;
+    u8 packet_id;
+    INSERT_PADDING_BYTES(0x1);
+    MCUPacketFlag packet_flag;
+    u8 data_length;
+    union {
+        std::array<u8, 0x1F> raw_data;
+        NFCReadCommandData nfc_read;
+        NFCPollingCommandData nfc_polling;
+    };
+    u8 crc;
+};
+static_assert(sizeof(NFCRequestState) == 0x26, "NFCRequestState is an invalid size");
+
+struct IrsConfigure {
+    MCUCommand command;
+    MCUSubCommand sub_command;
+    IrsMode irs_mode;
+    IrsFragments number_of_fragments;
+    u16 mcu_major_version;
+    u16 mcu_minor_version;
+    INSERT_PADDING_BYTES(0x1D);
+    u8 crc;
+};
+static_assert(sizeof(IrsConfigure) == 0x26, "IrsConfigure is an invalid size");
+
+#pragma pack(push, 1)
+struct IrsRegister {
+    IrRegistersAddress address;
+    u8 value;
+};
+static_assert(sizeof(IrsRegister) == 0x3, "IrsRegister is an invalid size");
+
+struct IrsWriteRegisters {
+    MCUCommand command;
+    MCUSubCommand sub_command;
+    u8 number_of_registers;
+    std::array<IrsRegister, 9> registers;
+    INSERT_PADDING_BYTES(0x7);
+    u8 crc;
+};
+static_assert(sizeof(IrsWriteRegisters) == 0x26, "IrsWriteRegisters is an invalid size");
+#pragma pack(pop)
+
+struct FirmwareVersion {
+    u8 major;
+    u8 minor;
+};
+static_assert(sizeof(FirmwareVersion) == 0x2, "FirmwareVersion is an invalid size");
+
+struct DeviceInfo {
+    FirmwareVersion firmware;
+    MacAddress mac_address;
+};
+static_assert(sizeof(DeviceInfo) == 0x8, "DeviceInfo is an invalid size");
+
+struct MotionStatus {
+    bool is_enabled;
+    u64 delta_time;
+    GyroSensitivity gyro_sensitivity;
+    AccelerometerSensitivity accelerometer_sensitivity;
+};
+
+struct RingStatus {
+    bool is_enabled;
+    s16 default_value;
+    s16 max_value;
+    s16 min_value;
+};
+
+struct JoyconCallbacks {
+    std::function<void(Battery)> on_battery_data;
+    std::function<void(Color)> on_color_data;
+    std::function<void(int, bool)> on_button_data;
+    std::function<void(int, f32)> on_stick_data;
+    std::function<void(int, const MotionData&)> on_motion_data;
+    std::function<void(f32)> on_ring_data;
+    std::function<void(const std::vector<u8>&)> on_amiibo_data;
+    std::function<void(const std::vector<u8>&, IrsResolution)> on_camera_data;
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/nfc.cpp b/src/input_common/helpers/joycon_protocol/nfc.cpp
new file mode 100644
index 000000000..5c0f71722
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/nfc.cpp
@@ -0,0 +1,400 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <thread>
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/nfc.h"
+
+namespace InputCommon::Joycon {
+
+NfcProtocol::NfcProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult NfcProtocol::EnableNfc() {
+    LOG_INFO(Input, "Enable NFC");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = SetReportMode(ReportMode::NFC_IR_MODE_60HZ);
+    }
+    if (result == DriverResult::Success) {
+        result = EnableMCU(true);
+    }
+    if (result == DriverResult::Success) {
+        result = WaitSetMCUMode(ReportMode::NFC_IR_MODE_60HZ, MCUMode::Standby);
+    }
+    if (result == DriverResult::Success) {
+        const MCUConfig config{
+            .command = MCUCommand::ConfigureMCU,
+            .sub_command = MCUSubCommand::SetMCUMode,
+            .mode = MCUMode::NFC,
+            .crc = {},
+        };
+
+        result = ConfigureMCU(config);
+    }
+
+    return result;
+}
+
+DriverResult NfcProtocol::DisableNfc() {
+    LOG_DEBUG(Input, "Disable NFC");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = EnableMCU(false);
+    }
+
+    is_enabled = false;
+
+    return result;
+}
+
+DriverResult NfcProtocol::StartNFCPollingMode() {
+    LOG_DEBUG(Input, "Start NFC pooling Mode");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+    TagFoundData tag_data{};
+
+    if (result == DriverResult::Success) {
+        result = WaitSetMCUMode(ReportMode::NFC_IR_MODE_60HZ, MCUMode::NFC);
+    }
+    if (result == DriverResult::Success) {
+        result = WaitUntilNfcIsReady();
+    }
+    if (result == DriverResult::Success) {
+        is_enabled = true;
+    }
+
+    return result;
+}
+
+DriverResult NfcProtocol::ScanAmiibo(std::vector<u8>& data) {
+    LOG_DEBUG(Input, "Start NFC pooling Mode");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+    TagFoundData tag_data{};
+
+    if (result == DriverResult::Success) {
+        result = StartPolling(tag_data);
+    }
+    if (result == DriverResult::Success) {
+        result = ReadTag(tag_data);
+    }
+    if (result == DriverResult::Success) {
+        result = WaitUntilNfcIsReady();
+    }
+    if (result == DriverResult::Success) {
+        result = StartPolling(tag_data);
+    }
+    if (result == DriverResult::Success) {
+        result = GetAmiiboData(data);
+    }
+
+    return result;
+}
+
+bool NfcProtocol::HasAmiibo() {
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+    TagFoundData tag_data{};
+
+    if (result == DriverResult::Success) {
+        result = StartPolling(tag_data);
+    }
+
+    return result == DriverResult::Success;
+}
+
+DriverResult NfcProtocol::WaitUntilNfcIsReady() {
+    constexpr std::size_t timeout_limit = 10;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    do {
+        auto result = SendStartWaitingRecieveRequest(output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ > timeout_limit) {
+            return DriverResult::Timeout;
+        }
+    } while (output[49] != 0x2a || (output[51] << 8) + output[50] != 0x0500 || output[55] != 0x31 ||
+             output[56] != 0x00);
+
+    return DriverResult::Success;
+}
+
+DriverResult NfcProtocol::StartPolling(TagFoundData& data) {
+    LOG_DEBUG(Input, "Start Polling for tag");
+    constexpr std::size_t timeout_limit = 7;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    do {
+        const auto result = SendStartPollingRequest(output);
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ > timeout_limit) {
+            return DriverResult::Timeout;
+        }
+    } while (output[49] != 0x2a || (output[51] << 8) + output[50] != 0x0500 || output[56] != 0x09);
+
+    data.type = output[62];
+    data.uuid.resize(output[64]);
+    memcpy(data.uuid.data(), output.data() + 65, data.uuid.size());
+
+    return DriverResult::Success;
+}
+
+DriverResult NfcProtocol::ReadTag(const TagFoundData& data) {
+    constexpr std::size_t timeout_limit = 10;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    std::string uuid_string;
+    for (auto& content : data.uuid) {
+        uuid_string += fmt::format(" {:02x}", content);
+    }
+
+    LOG_INFO(Input, "Tag detected, type={}, uuid={}", data.type, uuid_string);
+
+    tries = 0;
+    NFCPages ntag_pages = NFCPages::Block0;
+    // Read Tag data
+    while (true) {
+        auto result = SendReadAmiiboRequest(output, ntag_pages);
+        const auto mcu_report = static_cast<MCUReport>(output[49]);
+        const auto nfc_status = static_cast<NFCStatus>(output[56]);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if ((mcu_report == MCUReport::NFCReadData || mcu_report == MCUReport::NFCState) &&
+            nfc_status == NFCStatus::TagLost) {
+            return DriverResult::ErrorReadingData;
+        }
+
+        if (mcu_report == MCUReport::NFCReadData && output[51] == 0x07 && output[52] == 0x01) {
+            if (data.type != 2) {
+                continue;
+            }
+            switch (output[74]) {
+            case 0:
+                ntag_pages = NFCPages::Block135;
+                break;
+            case 3:
+                ntag_pages = NFCPages::Block45;
+                break;
+            case 4:
+                ntag_pages = NFCPages::Block231;
+                break;
+            default:
+                return DriverResult::ErrorReadingData;
+            }
+            continue;
+        }
+
+        if (mcu_report == MCUReport::NFCState && nfc_status == NFCStatus::LastPackage) {
+            // finished
+            SendStopPollingRequest(output);
+            return DriverResult::Success;
+        }
+
+        // Ignore other state reports
+        if (mcu_report == MCUReport::NFCState) {
+            continue;
+        }
+
+        if (tries++ > timeout_limit) {
+            return DriverResult::Timeout;
+        }
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult NfcProtocol::GetAmiiboData(std::vector<u8>& ntag_data) {
+    constexpr std::size_t timeout_limit = 10;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    NFCPages ntag_pages = NFCPages::Block135;
+    std::size_t ntag_buffer_pos = 0;
+    // Read Tag data
+    while (true) {
+        auto result = SendReadAmiiboRequest(output, ntag_pages);
+        const auto mcu_report = static_cast<MCUReport>(output[49]);
+        const auto nfc_status = static_cast<NFCStatus>(output[56]);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if ((mcu_report == MCUReport::NFCReadData || mcu_report == MCUReport::NFCState) &&
+            nfc_status == NFCStatus::TagLost) {
+            return DriverResult::ErrorReadingData;
+        }
+
+        if (mcu_report == MCUReport::NFCReadData && output[51] == 0x07) {
+            std::size_t payload_size = (output[54] << 8 | output[55]) & 0x7FF;
+            if (output[52] == 0x01) {
+                memcpy(ntag_data.data() + ntag_buffer_pos, output.data() + 116, payload_size - 60);
+                ntag_buffer_pos += payload_size - 60;
+            } else {
+                memcpy(ntag_data.data() + ntag_buffer_pos, output.data() + 56, payload_size);
+            }
+            continue;
+        }
+
+        if (mcu_report == MCUReport::NFCState && nfc_status == NFCStatus::LastPackage) {
+            LOG_INFO(Input, "Finished reading amiibo");
+            return DriverResult::Success;
+        }
+
+        // Ignore other state reports
+        if (mcu_report == MCUReport::NFCState) {
+            continue;
+        }
+
+        if (tries++ > timeout_limit) {
+            return DriverResult::Timeout;
+        }
+    }
+
+    return DriverResult::Success;
+}
+
+DriverResult NfcProtocol::SendStartPollingRequest(std::vector<u8>& output) {
+    NFCRequestState request{
+        .sub_command = MCUSubCommand::ReadDeviceMode,
+        .command_argument = NFCReadCommand::StartPolling,
+        .packet_id = 0x0,
+        .packet_flag = MCUPacketFlag::LastCommandPacket,
+        .data_length = sizeof(NFCPollingCommandData),
+        .nfc_polling =
+            {
+                .enable_mifare = 0x01,
+                .unknown_1 = 0x00,
+                .unknown_2 = 0x00,
+                .unknown_3 = 0x2c,
+                .unknown_4 = 0x01,
+            },
+        .crc = {},
+    };
+
+    std::array<u8, sizeof(NFCRequestState)> request_data{};
+    memcpy(request_data.data(), &request, sizeof(NFCRequestState));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    return SendMCUData(ReportMode::NFC_IR_MODE_60HZ, SubCommand::STATE, request_data, output);
+}
+
+DriverResult NfcProtocol::SendStopPollingRequest(std::vector<u8>& output) {
+    NFCRequestState request{
+        .sub_command = MCUSubCommand::ReadDeviceMode,
+        .command_argument = NFCReadCommand::StopPolling,
+        .packet_id = 0x0,
+        .packet_flag = MCUPacketFlag::LastCommandPacket,
+        .data_length = 0,
+        .raw_data = {},
+        .crc = {},
+    };
+
+    std::array<u8, sizeof(NFCRequestState)> request_data{};
+    memcpy(request_data.data(), &request, sizeof(NFCRequestState));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    return SendMCUData(ReportMode::NFC_IR_MODE_60HZ, SubCommand::STATE, request_data, output);
+}
+
+DriverResult NfcProtocol::SendStartWaitingRecieveRequest(std::vector<u8>& output) {
+    NFCRequestState request{
+        .sub_command = MCUSubCommand::ReadDeviceMode,
+        .command_argument = NFCReadCommand::StartWaitingRecieve,
+        .packet_id = 0x0,
+        .packet_flag = MCUPacketFlag::LastCommandPacket,
+        .data_length = 0,
+        .raw_data = {},
+        .crc = {},
+    };
+
+    std::vector<u8> request_data(sizeof(NFCRequestState));
+    memcpy(request_data.data(), &request, sizeof(NFCRequestState));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    return SendMCUData(ReportMode::NFC_IR_MODE_60HZ, SubCommand::STATE, request_data, output);
+}
+
+DriverResult NfcProtocol::SendReadAmiiboRequest(std::vector<u8>& output, NFCPages ntag_pages) {
+    NFCRequestState request{
+        .sub_command = MCUSubCommand::ReadDeviceMode,
+        .command_argument = NFCReadCommand::Ntag,
+        .packet_id = 0x0,
+        .packet_flag = MCUPacketFlag::LastCommandPacket,
+        .data_length = sizeof(NFCReadCommandData),
+        .nfc_read =
+            {
+                .unknown = 0xd0,
+                .uuid_length = 0x07,
+                .unknown_2 = 0x00,
+                .uid = {},
+                .tag_type = NFCTagType::AllTags,
+                .read_block = GetReadBlockCommand(ntag_pages),
+            },
+        .crc = {},
+    };
+
+    std::array<u8, sizeof(NFCRequestState)> request_data{};
+    memcpy(request_data.data(), &request, sizeof(NFCRequestState));
+    request_data[37] = CalculateMCU_CRC8(request_data.data() + 1, 36);
+    return SendMCUData(ReportMode::NFC_IR_MODE_60HZ, SubCommand::STATE, request_data, output);
+}
+
+NFCReadBlockCommand NfcProtocol::GetReadBlockCommand(NFCPages pages) const {
+    switch (pages) {
+    case NFCPages::Block0:
+        return {
+            .block_count = 1,
+        };
+    case NFCPages::Block45:
+        return {
+            .block_count = 1,
+            .blocks =
+                {
+                    NFCReadBlock{0x00, 0x2C},
+                },
+        };
+    case NFCPages::Block135:
+        return {
+            .block_count = 3,
+            .blocks =
+                {
+                    NFCReadBlock{0x00, 0x3b},
+                    {0x3c, 0x77},
+                    {0x78, 0x86},
+                },
+        };
+    case NFCPages::Block231:
+        return {
+            .block_count = 4,
+            .blocks =
+                {
+                    NFCReadBlock{0x00, 0x3b},
+                    {0x3c, 0x77},
+                    {0x78, 0x83},
+                    {0xb4, 0xe6},
+                },
+        };
+    default:
+        return {};
+    };
+}
+
+bool NfcProtocol::IsEnabled() const {
+    return is_enabled;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/nfc.h b/src/input_common/helpers/joycon_protocol/nfc.h
new file mode 100644
index 000000000..e63665aa9
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/nfc.h
@@ -0,0 +1,61 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+class NfcProtocol final : private JoyconCommonProtocol {
+public:
+    explicit NfcProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    DriverResult EnableNfc();
+
+    DriverResult DisableNfc();
+
+    DriverResult StartNFCPollingMode();
+
+    DriverResult ScanAmiibo(std::vector<u8>& data);
+
+    bool HasAmiibo();
+
+    bool IsEnabled() const;
+
+private:
+    struct TagFoundData {
+        u8 type;
+        std::vector<u8> uuid;
+    };
+
+    DriverResult WaitUntilNfcIsReady();
+
+    DriverResult StartPolling(TagFoundData& data);
+
+    DriverResult ReadTag(const TagFoundData& data);
+
+    DriverResult GetAmiiboData(std::vector<u8>& data);
+
+    DriverResult SendStartPollingRequest(std::vector<u8>& output);
+
+    DriverResult SendStopPollingRequest(std::vector<u8>& output);
+
+    DriverResult SendStartWaitingRecieveRequest(std::vector<u8>& output);
+
+    DriverResult SendReadAmiiboRequest(std::vector<u8>& output, NFCPages ntag_pages);
+
+    NFCReadBlockCommand GetReadBlockCommand(NFCPages pages) const;
+
+    bool is_enabled{};
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/poller.cpp b/src/input_common/helpers/joycon_protocol/poller.cpp
new file mode 100644
index 000000000..7f8e093fa
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/poller.cpp
@@ -0,0 +1,341 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/poller.h"
+
+namespace InputCommon::Joycon {
+
+JoyconPoller::JoyconPoller(ControllerType device_type_, JoyStickCalibration left_stick_calibration_,
+                           JoyStickCalibration right_stick_calibration_,
+                           MotionCalibration motion_calibration_)
+    : device_type{device_type_}, left_stick_calibration{left_stick_calibration_},
+      right_stick_calibration{right_stick_calibration_}, motion_calibration{motion_calibration_} {}
+
+void JoyconPoller::SetCallbacks(const Joycon::JoyconCallbacks& callbacks_) {
+    callbacks = std::move(callbacks_);
+}
+
+void JoyconPoller::ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status,
+                                  const RingStatus& ring_status) {
+    InputReportActive data{};
+    memcpy(&data, buffer.data(), sizeof(InputReportActive));
+
+    switch (device_type) {
+    case Joycon::ControllerType::Left:
+        UpdateActiveLeftPadInput(data, motion_status);
+        break;
+    case Joycon::ControllerType::Right:
+        UpdateActiveRightPadInput(data, motion_status);
+        break;
+    case Joycon::ControllerType::Pro:
+        UpdateActiveProPadInput(data, motion_status);
+        break;
+    case Joycon::ControllerType::Grip:
+    case Joycon::ControllerType::Dual:
+    case Joycon::ControllerType::None:
+        break;
+    }
+
+    if (ring_status.is_enabled) {
+        UpdateRing(data.ring_input, ring_status);
+    }
+
+    callbacks.on_battery_data(data.battery_status);
+}
+
+void JoyconPoller::ReadPassiveMode(std::span<u8> buffer) {
+    InputReportPassive data{};
+    memcpy(&data, buffer.data(), sizeof(InputReportPassive));
+
+    switch (device_type) {
+    case Joycon::ControllerType::Left:
+        UpdatePasiveLeftPadInput(data);
+        break;
+    case Joycon::ControllerType::Right:
+        UpdatePasiveRightPadInput(data);
+        break;
+    case Joycon::ControllerType::Pro:
+        UpdatePasiveProPadInput(data);
+        break;
+    case Joycon::ControllerType::Grip:
+    case Joycon::ControllerType::Dual:
+    case Joycon::ControllerType::None:
+        break;
+    }
+}
+
+void JoyconPoller::ReadNfcIRMode(std::span<u8> buffer, const MotionStatus& motion_status) {
+    // This mode is compatible with the active mode
+    ReadActiveMode(buffer, motion_status, {});
+}
+
+void JoyconPoller::UpdateColor(const Color& color) {
+    callbacks.on_color_data(color);
+}
+
+void JoyconPoller::UpdateAmiibo(const std::vector<u8>& amiibo_data) {
+    callbacks.on_amiibo_data(amiibo_data);
+}
+
+void JoyconPoller::UpdateCamera(const std::vector<u8>& camera_data, IrsResolution format) {
+    callbacks.on_camera_data(camera_data, format);
+}
+
+void JoyconPoller::UpdateRing(s16 value, const RingStatus& ring_status) {
+    float normalized_value = static_cast<float>(value - ring_status.default_value);
+    if (normalized_value > 0) {
+        normalized_value = normalized_value /
+                           static_cast<float>(ring_status.max_value - ring_status.default_value);
+    }
+    if (normalized_value < 0) {
+        normalized_value = normalized_value /
+                           static_cast<float>(ring_status.default_value - ring_status.min_value);
+    }
+    callbacks.on_ring_data(normalized_value);
+}
+
+void JoyconPoller::UpdateActiveLeftPadInput(const InputReportActive& input,
+                                            const MotionStatus& motion_status) {
+    static constexpr std::array<Joycon::PadButton, 11> left_buttons{
+        Joycon::PadButton::Down,    Joycon::PadButton::Up,     Joycon::PadButton::Right,
+        Joycon::PadButton::Left,    Joycon::PadButton::LeftSL, Joycon::PadButton::LeftSR,
+        Joycon::PadButton::L,       Joycon::PadButton::ZL,     Joycon::PadButton::Minus,
+        Joycon::PadButton::Capture, Joycon::PadButton::StickL,
+    };
+
+    const u32 raw_button =
+        static_cast<u32>(input.button_input[2] | ((input.button_input[1] & 0b00101001) << 16));
+    for (std::size_t i = 0; i < left_buttons.size(); ++i) {
+        const bool button_status = (raw_button & static_cast<u32>(left_buttons[i])) != 0;
+        const int button = static_cast<int>(left_buttons[i]);
+        callbacks.on_button_data(button, button_status);
+    }
+
+    const u16 raw_left_axis_x =
+        static_cast<u16>(input.left_stick_state[0] | ((input.left_stick_state[1] & 0xf) << 8));
+    const u16 raw_left_axis_y =
+        static_cast<u16>((input.left_stick_state[1] >> 4) | (input.left_stick_state[2] << 4));
+    const f32 left_axis_x = GetAxisValue(raw_left_axis_x, left_stick_calibration.x);
+    const f32 left_axis_y = GetAxisValue(raw_left_axis_y, left_stick_calibration.y);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::LeftStickX), left_axis_x);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::LeftStickY), left_axis_y);
+
+    if (motion_status.is_enabled) {
+        auto left_motion = GetMotionInput(input, motion_status);
+        // Rotate motion axis to the correct direction
+        left_motion.accel_y = -left_motion.accel_y;
+        left_motion.accel_z = -left_motion.accel_z;
+        left_motion.gyro_x = -left_motion.gyro_x;
+        callbacks.on_motion_data(static_cast<int>(PadMotion::LeftMotion), left_motion);
+    }
+}
+
+void JoyconPoller::UpdateActiveRightPadInput(const InputReportActive& input,
+                                             const MotionStatus& motion_status) {
+    static constexpr std::array<Joycon::PadButton, 11> right_buttons{
+        Joycon::PadButton::Y,    Joycon::PadButton::X,       Joycon::PadButton::B,
+        Joycon::PadButton::A,    Joycon::PadButton::RightSL, Joycon::PadButton::RightSR,
+        Joycon::PadButton::R,    Joycon::PadButton::ZR,      Joycon::PadButton::Plus,
+        Joycon::PadButton::Home, Joycon::PadButton::StickR,
+    };
+
+    const u32 raw_button =
+        static_cast<u32>((input.button_input[0] << 8) | (input.button_input[1] << 16));
+    for (std::size_t i = 0; i < right_buttons.size(); ++i) {
+        const bool button_status = (raw_button & static_cast<u32>(right_buttons[i])) != 0;
+        const int button = static_cast<int>(right_buttons[i]);
+        callbacks.on_button_data(button, button_status);
+    }
+
+    const u16 raw_right_axis_x =
+        static_cast<u16>(input.right_stick_state[0] | ((input.right_stick_state[1] & 0xf) << 8));
+    const u16 raw_right_axis_y =
+        static_cast<u16>((input.right_stick_state[1] >> 4) | (input.right_stick_state[2] << 4));
+    const f32 right_axis_x = GetAxisValue(raw_right_axis_x, right_stick_calibration.x);
+    const f32 right_axis_y = GetAxisValue(raw_right_axis_y, right_stick_calibration.y);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::RightStickX), right_axis_x);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::RightStickY), right_axis_y);
+
+    if (motion_status.is_enabled) {
+        auto right_motion = GetMotionInput(input, motion_status);
+        // Rotate motion axis to the correct direction
+        right_motion.accel_x = -right_motion.accel_x;
+        right_motion.accel_y = -right_motion.accel_y;
+        right_motion.gyro_z = -right_motion.gyro_z;
+        callbacks.on_motion_data(static_cast<int>(PadMotion::RightMotion), right_motion);
+    }
+}
+
+void JoyconPoller::UpdateActiveProPadInput(const InputReportActive& input,
+                                           const MotionStatus& motion_status) {
+    static constexpr std::array<Joycon::PadButton, 18> pro_buttons{
+        Joycon::PadButton::Down,  Joycon::PadButton::Up,      Joycon::PadButton::Right,
+        Joycon::PadButton::Left,  Joycon::PadButton::L,       Joycon::PadButton::ZL,
+        Joycon::PadButton::Minus, Joycon::PadButton::Capture, Joycon::PadButton::Y,
+        Joycon::PadButton::X,     Joycon::PadButton::B,       Joycon::PadButton::A,
+        Joycon::PadButton::R,     Joycon::PadButton::ZR,      Joycon::PadButton::Plus,
+        Joycon::PadButton::Home,  Joycon::PadButton::StickL,  Joycon::PadButton::StickR,
+    };
+
+    const u32 raw_button = static_cast<u32>(input.button_input[2] | (input.button_input[0] << 8) |
+                                            (input.button_input[1] << 16));
+    for (std::size_t i = 0; i < pro_buttons.size(); ++i) {
+        const bool button_status = (raw_button & static_cast<u32>(pro_buttons[i])) != 0;
+        const int button = static_cast<int>(pro_buttons[i]);
+        callbacks.on_button_data(button, button_status);
+    }
+
+    const u16 raw_left_axis_x =
+        static_cast<u16>(input.left_stick_state[0] | ((input.left_stick_state[1] & 0xf) << 8));
+    const u16 raw_left_axis_y =
+        static_cast<u16>((input.left_stick_state[1] >> 4) | (input.left_stick_state[2] << 4));
+    const u16 raw_right_axis_x =
+        static_cast<u16>(input.right_stick_state[0] | ((input.right_stick_state[1] & 0xf) << 8));
+    const u16 raw_right_axis_y =
+        static_cast<u16>((input.right_stick_state[1] >> 4) | (input.right_stick_state[2] << 4));
+
+    const f32 left_axis_x = GetAxisValue(raw_left_axis_x, left_stick_calibration.x);
+    const f32 left_axis_y = GetAxisValue(raw_left_axis_y, left_stick_calibration.y);
+    const f32 right_axis_x = GetAxisValue(raw_right_axis_x, right_stick_calibration.x);
+    const f32 right_axis_y = GetAxisValue(raw_right_axis_y, right_stick_calibration.y);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::LeftStickX), left_axis_x);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::LeftStickY), left_axis_y);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::RightStickX), right_axis_x);
+    callbacks.on_stick_data(static_cast<int>(PadAxes::RightStickY), right_axis_y);
+
+    if (motion_status.is_enabled) {
+        auto pro_motion = GetMotionInput(input, motion_status);
+        pro_motion.gyro_x = -pro_motion.gyro_x;
+        pro_motion.accel_y = -pro_motion.accel_y;
+        pro_motion.accel_z = -pro_motion.accel_z;
+        callbacks.on_motion_data(static_cast<int>(PadMotion::LeftMotion), pro_motion);
+        callbacks.on_motion_data(static_cast<int>(PadMotion::RightMotion), pro_motion);
+    }
+}
+
+void JoyconPoller::UpdatePasiveLeftPadInput(const InputReportPassive& input) {
+    static constexpr std::array<Joycon::PasivePadButton, 11> left_buttons{
+        Joycon::PasivePadButton::Down_A, Joycon::PasivePadButton::Right_X,
+        Joycon::PasivePadButton::Left_B, Joycon::PasivePadButton::Up_Y,
+        Joycon::PasivePadButton::SL,     Joycon::PasivePadButton::SR,
+        Joycon::PasivePadButton::L_R,    Joycon::PasivePadButton::ZL_ZR,
+        Joycon::PasivePadButton::Minus,  Joycon::PasivePadButton::Capture,
+        Joycon::PasivePadButton::StickL,
+    };
+
+    for (auto left_button : left_buttons) {
+        const bool button_status = (input.button_input & static_cast<u32>(left_button)) != 0;
+        const int button = static_cast<int>(left_button);
+        callbacks.on_button_data(button, button_status);
+    }
+}
+
+void JoyconPoller::UpdatePasiveRightPadInput(const InputReportPassive& input) {
+    static constexpr std::array<Joycon::PasivePadButton, 11> right_buttons{
+        Joycon::PasivePadButton::Down_A, Joycon::PasivePadButton::Right_X,
+        Joycon::PasivePadButton::Left_B, Joycon::PasivePadButton::Up_Y,
+        Joycon::PasivePadButton::SL,     Joycon::PasivePadButton::SR,
+        Joycon::PasivePadButton::L_R,    Joycon::PasivePadButton::ZL_ZR,
+        Joycon::PasivePadButton::Plus,   Joycon::PasivePadButton::Home,
+        Joycon::PasivePadButton::StickR,
+    };
+
+    for (auto right_button : right_buttons) {
+        const bool button_status = (input.button_input & static_cast<u32>(right_button)) != 0;
+        const int button = static_cast<int>(right_button);
+        callbacks.on_button_data(button, button_status);
+    }
+}
+
+void JoyconPoller::UpdatePasiveProPadInput(const InputReportPassive& input) {
+    static constexpr std::array<Joycon::PasivePadButton, 14> pro_buttons{
+        Joycon::PasivePadButton::Down_A,  Joycon::PasivePadButton::Right_X,
+        Joycon::PasivePadButton::Left_B,  Joycon::PasivePadButton::Up_Y,
+        Joycon::PasivePadButton::SL,      Joycon::PasivePadButton::SR,
+        Joycon::PasivePadButton::L_R,     Joycon::PasivePadButton::ZL_ZR,
+        Joycon::PasivePadButton::Minus,   Joycon::PasivePadButton::Plus,
+        Joycon::PasivePadButton::Capture, Joycon::PasivePadButton::Home,
+        Joycon::PasivePadButton::StickL,  Joycon::PasivePadButton::StickR,
+    };
+
+    for (auto pro_button : pro_buttons) {
+        const bool button_status = (input.button_input & static_cast<u32>(pro_button)) != 0;
+        const int button = static_cast<int>(pro_button);
+        callbacks.on_button_data(button, button_status);
+    }
+}
+
+f32 JoyconPoller::GetAxisValue(u16 raw_value, Joycon::JoyStickAxisCalibration calibration) const {
+    const f32 value = static_cast<f32>(raw_value - calibration.center);
+    if (value > 0.0f) {
+        return value / calibration.max;
+    }
+    return value / calibration.min;
+}
+
+f32 JoyconPoller::GetAccelerometerValue(s16 raw, const MotionSensorCalibration& cal,
+                                        AccelerometerSensitivity sensitivity) const {
+    const f32 value = raw * (1.0f / (cal.scale - cal.offset)) * 4;
+    switch (sensitivity) {
+    case Joycon::AccelerometerSensitivity::G2:
+        return value / 4.0f;
+    case Joycon::AccelerometerSensitivity::G4:
+        return value / 2.0f;
+    case Joycon::AccelerometerSensitivity::G8:
+        return value;
+    case Joycon::AccelerometerSensitivity::G16:
+        return value * 2.0f;
+    }
+    return value;
+}
+
+f32 JoyconPoller::GetGyroValue(s16 raw, const MotionSensorCalibration& cal,
+                               GyroSensitivity sensitivity) const {
+    const f32 value = (raw - cal.offset) * (936.0f / (cal.scale - cal.offset)) / 360.0f;
+    switch (sensitivity) {
+    case Joycon::GyroSensitivity::DPS250:
+        return value / 8.0f;
+    case Joycon::GyroSensitivity::DPS500:
+        return value / 4.0f;
+    case Joycon::GyroSensitivity::DPS1000:
+        return value / 2.0f;
+    case Joycon::GyroSensitivity::DPS2000:
+        return value;
+    }
+    return value;
+}
+
+s16 JoyconPoller::GetRawIMUValues(std::size_t sensor, size_t axis,
+                                  const InputReportActive& input) const {
+    return input.motion_input[(sensor * 3) + axis];
+}
+
+MotionData JoyconPoller::GetMotionInput(const InputReportActive& input,
+                                        const MotionStatus& motion_status) const {
+    MotionData motion{};
+    const auto& accel_cal = motion_calibration.accelerometer;
+    const auto& gyro_cal = motion_calibration.gyro;
+    const s16 raw_accel_x = input.motion_input[1];
+    const s16 raw_accel_y = input.motion_input[0];
+    const s16 raw_accel_z = input.motion_input[2];
+    const s16 raw_gyro_x = input.motion_input[4];
+    const s16 raw_gyro_y = input.motion_input[3];
+    const s16 raw_gyro_z = input.motion_input[5];
+
+    motion.delta_timestamp = motion_status.delta_time;
+    motion.accel_x =
+        GetAccelerometerValue(raw_accel_x, accel_cal[1], motion_status.accelerometer_sensitivity);
+    motion.accel_y =
+        GetAccelerometerValue(raw_accel_y, accel_cal[0], motion_status.accelerometer_sensitivity);
+    motion.accel_z =
+        GetAccelerometerValue(raw_accel_z, accel_cal[2], motion_status.accelerometer_sensitivity);
+    motion.gyro_x = GetGyroValue(raw_gyro_x, gyro_cal[1], motion_status.gyro_sensitivity);
+    motion.gyro_y = GetGyroValue(raw_gyro_y, gyro_cal[0], motion_status.gyro_sensitivity);
+    motion.gyro_z = GetGyroValue(raw_gyro_z, gyro_cal[2], motion_status.gyro_sensitivity);
+
+    // TODO(German77): Return all three samples data
+    return motion;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/poller.h b/src/input_common/helpers/joycon_protocol/poller.h
new file mode 100644
index 000000000..354d41dad
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/poller.h
@@ -0,0 +1,81 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <functional>
+#include <span>
+
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+// Handles input packages and triggers the corresponding input events
+class JoyconPoller {
+public:
+    JoyconPoller(ControllerType device_type_, JoyStickCalibration left_stick_calibration_,
+                 JoyStickCalibration right_stick_calibration_,
+                 MotionCalibration motion_calibration_);
+
+    void SetCallbacks(const Joycon::JoyconCallbacks& callbacks_);
+
+    /// Handles data from passive packages
+    void ReadPassiveMode(std::span<u8> buffer);
+
+    /// Handles data from active packages
+    void ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status,
+                        const RingStatus& ring_status);
+
+    /// Handles data from nfc or ir packages
+    void ReadNfcIRMode(std::span<u8> buffer, const MotionStatus& motion_status);
+
+    void UpdateColor(const Color& color);
+    void UpdateRing(s16 value, const RingStatus& ring_status);
+    void UpdateAmiibo(const std::vector<u8>& amiibo_data);
+    void UpdateCamera(const std::vector<u8>& amiibo_data, IrsResolution format);
+
+private:
+    void UpdateActiveLeftPadInput(const InputReportActive& input,
+                                  const MotionStatus& motion_status);
+    void UpdateActiveRightPadInput(const InputReportActive& input,
+                                   const MotionStatus& motion_status);
+    void UpdateActiveProPadInput(const InputReportActive& input, const MotionStatus& motion_status);
+
+    void UpdatePasiveLeftPadInput(const InputReportPassive& buffer);
+    void UpdatePasiveRightPadInput(const InputReportPassive& buffer);
+    void UpdatePasiveProPadInput(const InputReportPassive& buffer);
+
+    /// Returns a calibrated joystick axis from raw axis data
+    f32 GetAxisValue(u16 raw_value, Joycon::JoyStickAxisCalibration calibration) const;
+
+    /// Returns a calibrated accelerometer axis from raw motion data
+    f32 GetAccelerometerValue(s16 raw, const MotionSensorCalibration& cal,
+                              AccelerometerSensitivity sensitivity) const;
+
+    /// Returns a calibrated gyro axis from raw motion data
+    f32 GetGyroValue(s16 raw_value, const MotionSensorCalibration& cal,
+                     GyroSensitivity sensitivity) const;
+
+    /// Returns a raw motion value from a buffer
+    s16 GetRawIMUValues(size_t sensor, size_t axis, const InputReportActive& input) const;
+
+    /// Returns motion data from a buffer
+    MotionData GetMotionInput(const InputReportActive& input,
+                              const MotionStatus& motion_status) const;
+
+    ControllerType device_type{};
+
+    // Device calibration
+    JoyStickCalibration left_stick_calibration{};
+    JoyStickCalibration right_stick_calibration{};
+    MotionCalibration motion_calibration{};
+
+    Joycon::JoyconCallbacks callbacks{};
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/ringcon.cpp b/src/input_common/helpers/joycon_protocol/ringcon.cpp
new file mode 100644
index 000000000..12f81309e
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/ringcon.cpp
@@ -0,0 +1,117 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/ringcon.h"
+
+namespace InputCommon::Joycon {
+
+RingConProtocol::RingConProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult RingConProtocol::EnableRingCon() {
+    LOG_DEBUG(Input, "Enable Ringcon");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = SetReportMode(ReportMode::STANDARD_FULL_60HZ);
+    }
+    if (result == DriverResult::Success) {
+        result = EnableMCU(true);
+    }
+    if (result == DriverResult::Success) {
+        const MCUConfig config{
+            .command = MCUCommand::ConfigureMCU,
+            .sub_command = MCUSubCommand::SetDeviceMode,
+            .mode = MCUMode::Standby,
+            .crc = {},
+        };
+        result = ConfigureMCU(config);
+    }
+
+    return result;
+}
+
+DriverResult RingConProtocol::DisableRingCon() {
+    LOG_DEBUG(Input, "Disable RingCon");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+
+    if (result == DriverResult::Success) {
+        result = EnableMCU(false);
+    }
+
+    is_enabled = false;
+
+    return result;
+}
+
+DriverResult RingConProtocol::StartRingconPolling() {
+    LOG_DEBUG(Input, "Enable Ringcon");
+    ScopedSetBlocking sb(this);
+    DriverResult result{DriverResult::Success};
+    bool is_connected = false;
+
+    if (result == DriverResult::Success) {
+        result = IsRingConnected(is_connected);
+    }
+    if (result == DriverResult::Success && is_connected) {
+        LOG_INFO(Input, "Ringcon detected");
+        result = ConfigureRing();
+    }
+    if (result == DriverResult::Success) {
+        is_enabled = true;
+    }
+
+    return result;
+}
+
+DriverResult RingConProtocol::IsRingConnected(bool& is_connected) {
+    LOG_DEBUG(Input, "IsRingConnected");
+    constexpr std::size_t max_tries = 28;
+    constexpr u8 ring_controller_id = 0x20;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+    is_connected = false;
+
+    do {
+        std::array<u8, 1> empty_data{};
+        const auto result = SendSubCommand(SubCommand::UNKNOWN_RINGCON, empty_data, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if (tries++ >= max_tries) {
+            return DriverResult::NoDeviceDetected;
+        }
+    } while (output[16] != ring_controller_id);
+
+    is_connected = true;
+    return DriverResult::Success;
+}
+
+DriverResult RingConProtocol::ConfigureRing() {
+    LOG_DEBUG(Input, "ConfigureRing");
+
+    static constexpr std::array<u8, 37> ring_config{
+        0x06, 0x03, 0x25, 0x06, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x16, 0xED, 0x34, 0x36,
+        0x00, 0x00, 0x00, 0x0A, 0x64, 0x0B, 0xE6, 0xA9, 0x22, 0x00, 0x00, 0x04, 0x00,
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90, 0xA8, 0xE1, 0x34, 0x36};
+
+    const DriverResult result = SendSubCommand(SubCommand::UNKNOWN_RINGCON3, ring_config);
+
+    if (result != DriverResult::Success) {
+        return result;
+    }
+
+    static constexpr std::array<u8, 4> ringcon_data{0x04, 0x01, 0x01, 0x02};
+    return SendSubCommand(SubCommand::UNKNOWN_RINGCON2, ringcon_data);
+}
+
+bool RingConProtocol::IsEnabled() const {
+    return is_enabled;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/ringcon.h b/src/input_common/helpers/joycon_protocol/ringcon.h
new file mode 100644
index 000000000..6e858f3fc
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/ringcon.h
@@ -0,0 +1,38 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+class RingConProtocol final : private JoyconCommonProtocol {
+public:
+    explicit RingConProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    DriverResult EnableRingCon();
+
+    DriverResult DisableRingCon();
+
+    DriverResult StartRingconPolling();
+
+    bool IsEnabled() const;
+
+private:
+    DriverResult IsRingConnected(bool& is_connected);
+
+    DriverResult ConfigureRing();
+
+    bool is_enabled{};
+};
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/rumble.cpp b/src/input_common/helpers/joycon_protocol/rumble.cpp
new file mode 100644
index 000000000..63b60c946
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/rumble.cpp
@@ -0,0 +1,299 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <algorithm>
+#include <cmath>
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/rumble.h"
+
+namespace InputCommon::Joycon {
+
+RumbleProtocol::RumbleProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(std::move(handle)) {}
+
+DriverResult RumbleProtocol::EnableRumble(bool is_enabled) {
+    LOG_DEBUG(Input, "Enable Rumble");
+    ScopedSetBlocking sb(this);
+    const std::array<u8, 1> buffer{static_cast<u8>(is_enabled ? 1 : 0)};
+    return SendSubCommand(SubCommand::ENABLE_VIBRATION, buffer);
+}
+
+DriverResult RumbleProtocol::SendVibration(const VibrationValue& vibration) {
+    std::array<u8, sizeof(DefaultVibrationBuffer)> buffer{};
+
+    if (vibration.high_amplitude <= 0.0f && vibration.low_amplitude <= 0.0f) {
+        return SendVibrationReport(DefaultVibrationBuffer);
+    }
+
+    // Protect joycons from damage from strong vibrations
+    const f32 clamp_amplitude =
+        1.0f / std::max(1.0f, vibration.high_amplitude + vibration.low_amplitude);
+
+    const u16 encoded_high_frequency = EncodeHighFrequency(vibration.high_frequency);
+    const u8 encoded_high_amplitude =
+        EncodeHighAmplitude(vibration.high_amplitude * clamp_amplitude);
+    const u8 encoded_low_frequency = EncodeLowFrequency(vibration.low_frequency);
+    const u16 encoded_low_amplitude = EncodeLowAmplitude(vibration.low_amplitude * clamp_amplitude);
+
+    buffer[0] = static_cast<u8>(encoded_high_frequency & 0xFF);
+    buffer[1] = static_cast<u8>(encoded_high_amplitude | ((encoded_high_frequency >> 8) & 0x01));
+    buffer[2] = static_cast<u8>(encoded_low_frequency | ((encoded_low_amplitude >> 8) & 0x80));
+    buffer[3] = static_cast<u8>(encoded_low_amplitude & 0xFF);
+
+    // Duplicate rumble for now
+    buffer[4] = buffer[0];
+    buffer[5] = buffer[1];
+    buffer[6] = buffer[2];
+    buffer[7] = buffer[3];
+
+    return SendVibrationReport(buffer);
+}
+
+u16 RumbleProtocol::EncodeHighFrequency(f32 frequency) const {
+    const u8 new_frequency =
+        static_cast<u8>(std::clamp(std::log2(frequency / 10.0f) * 32.0f, 0.0f, 255.0f));
+    return static_cast<u16>((new_frequency - 0x60) * 4);
+}
+
+u8 RumbleProtocol::EncodeLowFrequency(f32 frequency) const {
+    const u8 new_frequency =
+        static_cast<u8>(std::clamp(std::log2(frequency / 10.0f) * 32.0f, 0.0f, 255.0f));
+    return static_cast<u8>(new_frequency - 0x40);
+}
+
+u8 RumbleProtocol::EncodeHighAmplitude(f32 amplitude) const {
+    // More information about these values can be found here:
+    // https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering/blob/master/rumble_data_table.md
+
+    static constexpr std::array<std::pair<f32, int>, 101> high_fequency_amplitude{
+        std::pair<f32, int>{0.0f, 0x0},
+        {0.01f, 0x2},
+        {0.012f, 0x4},
+        {0.014f, 0x6},
+        {0.017f, 0x8},
+        {0.02f, 0x0a},
+        {0.024f, 0x0c},
+        {0.028f, 0x0e},
+        {0.033f, 0x10},
+        {0.04f, 0x12},
+        {0.047f, 0x14},
+        {0.056f, 0x16},
+        {0.067f, 0x18},
+        {0.08f, 0x1a},
+        {0.095f, 0x1c},
+        {0.112f, 0x1e},
+        {0.117f, 0x20},
+        {0.123f, 0x22},
+        {0.128f, 0x24},
+        {0.134f, 0x26},
+        {0.14f, 0x28},
+        {0.146f, 0x2a},
+        {0.152f, 0x2c},
+        {0.159f, 0x2e},
+        {0.166f, 0x30},
+        {0.173f, 0x32},
+        {0.181f, 0x34},
+        {0.189f, 0x36},
+        {0.198f, 0x38},
+        {0.206f, 0x3a},
+        {0.215f, 0x3c},
+        {0.225f, 0x3e},
+        {0.23f, 0x40},
+        {0.235f, 0x42},
+        {0.24f, 0x44},
+        {0.245f, 0x46},
+        {0.251f, 0x48},
+        {0.256f, 0x4a},
+        {0.262f, 0x4c},
+        {0.268f, 0x4e},
+        {0.273f, 0x50},
+        {0.279f, 0x52},
+        {0.286f, 0x54},
+        {0.292f, 0x56},
+        {0.298f, 0x58},
+        {0.305f, 0x5a},
+        {0.311f, 0x5c},
+        {0.318f, 0x5e},
+        {0.325f, 0x60},
+        {0.332f, 0x62},
+        {0.34f, 0x64},
+        {0.347f, 0x66},
+        {0.355f, 0x68},
+        {0.362f, 0x6a},
+        {0.37f, 0x6c},
+        {0.378f, 0x6e},
+        {0.387f, 0x70},
+        {0.395f, 0x72},
+        {0.404f, 0x74},
+        {0.413f, 0x76},
+        {0.422f, 0x78},
+        {0.431f, 0x7a},
+        {0.44f, 0x7c},
+        {0.45f, 0x7e},
+        {0.46f, 0x80},
+        {0.47f, 0x82},
+        {0.48f, 0x84},
+        {0.491f, 0x86},
+        {0.501f, 0x88},
+        {0.512f, 0x8a},
+        {0.524f, 0x8c},
+        {0.535f, 0x8e},
+        {0.547f, 0x90},
+        {0.559f, 0x92},
+        {0.571f, 0x94},
+        {0.584f, 0x96},
+        {0.596f, 0x98},
+        {0.609f, 0x9a},
+        {0.623f, 0x9c},
+        {0.636f, 0x9e},
+        {0.65f, 0xa0},
+        {0.665f, 0xa2},
+        {0.679f, 0xa4},
+        {0.694f, 0xa6},
+        {0.709f, 0xa8},
+        {0.725f, 0xaa},
+        {0.741f, 0xac},
+        {0.757f, 0xae},
+        {0.773f, 0xb0},
+        {0.79f, 0xb2},
+        {0.808f, 0xb4},
+        {0.825f, 0xb6},
+        {0.843f, 0xb8},
+        {0.862f, 0xba},
+        {0.881f, 0xbc},
+        {0.9f, 0xbe},
+        {0.92f, 0xc0},
+        {0.94f, 0xc2},
+        {0.96f, 0xc4},
+        {0.981f, 0xc6},
+        {1.003f, 0xc8},
+    };
+
+    for (const auto& [amplitude_value, code] : high_fequency_amplitude) {
+        if (amplitude <= amplitude_value) {
+            return static_cast<u8>(code);
+        }
+    }
+
+    return static_cast<u8>(high_fequency_amplitude[high_fequency_amplitude.size() - 1].second);
+}
+
+u16 RumbleProtocol::EncodeLowAmplitude(f32 amplitude) const {
+    // More information about these values can be found here:
+    // https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering/blob/master/rumble_data_table.md
+
+    static constexpr std::array<std::pair<f32, int>, 101> high_fequency_amplitude{
+        std::pair<f32, int>{0.0f, 0x0040},
+        {0.01f, 0x8040},
+        {0.012f, 0x0041},
+        {0.014f, 0x8041},
+        {0.017f, 0x0042},
+        {0.02f, 0x8042},
+        {0.024f, 0x0043},
+        {0.028f, 0x8043},
+        {0.033f, 0x0044},
+        {0.04f, 0x8044},
+        {0.047f, 0x0045},
+        {0.056f, 0x8045},
+        {0.067f, 0x0046},
+        {0.08f, 0x8046},
+        {0.095f, 0x0047},
+        {0.112f, 0x8047},
+        {0.117f, 0x0048},
+        {0.123f, 0x8048},
+        {0.128f, 0x0049},
+        {0.134f, 0x8049},
+        {0.14f, 0x004a},
+        {0.146f, 0x804a},
+        {0.152f, 0x004b},
+        {0.159f, 0x804b},
+        {0.166f, 0x004c},
+        {0.173f, 0x804c},
+        {0.181f, 0x004d},
+        {0.189f, 0x804d},
+        {0.198f, 0x004e},
+        {0.206f, 0x804e},
+        {0.215f, 0x004f},
+        {0.225f, 0x804f},
+        {0.23f, 0x0050},
+        {0.235f, 0x8050},
+        {0.24f, 0x0051},
+        {0.245f, 0x8051},
+        {0.251f, 0x0052},
+        {0.256f, 0x8052},
+        {0.262f, 0x0053},
+        {0.268f, 0x8053},
+        {0.273f, 0x0054},
+        {0.279f, 0x8054},
+        {0.286f, 0x0055},
+        {0.292f, 0x8055},
+        {0.298f, 0x0056},
+        {0.305f, 0x8056},
+        {0.311f, 0x0057},
+        {0.318f, 0x8057},
+        {0.325f, 0x0058},
+        {0.332f, 0x8058},
+        {0.34f, 0x0059},
+        {0.347f, 0x8059},
+        {0.355f, 0x005a},
+        {0.362f, 0x805a},
+        {0.37f, 0x005b},
+        {0.378f, 0x805b},
+        {0.387f, 0x005c},
+        {0.395f, 0x805c},
+        {0.404f, 0x005d},
+        {0.413f, 0x805d},
+        {0.422f, 0x005e},
+        {0.431f, 0x805e},
+        {0.44f, 0x005f},
+        {0.45f, 0x805f},
+        {0.46f, 0x0060},
+        {0.47f, 0x8060},
+        {0.48f, 0x0061},
+        {0.491f, 0x8061},
+        {0.501f, 0x0062},
+        {0.512f, 0x8062},
+        {0.524f, 0x0063},
+        {0.535f, 0x8063},
+        {0.547f, 0x0064},
+        {0.559f, 0x8064},
+        {0.571f, 0x0065},
+        {0.584f, 0x8065},
+        {0.596f, 0x0066},
+        {0.609f, 0x8066},
+        {0.623f, 0x0067},
+        {0.636f, 0x8067},
+        {0.65f, 0x0068},
+        {0.665f, 0x8068},
+        {0.679f, 0x0069},
+        {0.694f, 0x8069},
+        {0.709f, 0x006a},
+        {0.725f, 0x806a},
+        {0.741f, 0x006b},
+        {0.757f, 0x806b},
+        {0.773f, 0x006c},
+        {0.79f, 0x806c},
+        {0.808f, 0x006d},
+        {0.825f, 0x806d},
+        {0.843f, 0x006e},
+        {0.862f, 0x806e},
+        {0.881f, 0x006f},
+        {0.9f, 0x806f},
+        {0.92f, 0x0070},
+        {0.94f, 0x8070},
+        {0.96f, 0x0071},
+        {0.981f, 0x8071},
+        {1.003f, 0x0072},
+    };
+
+    for (const auto& [amplitude_value, code] : high_fequency_amplitude) {
+        if (amplitude <= amplitude_value) {
+            return static_cast<u16>(code);
+        }
+    }
+
+    return static_cast<u16>(high_fequency_amplitude[high_fequency_amplitude.size() - 1].second);
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/rumble.h b/src/input_common/helpers/joycon_protocol/rumble.h
new file mode 100644
index 000000000..6c12b7925
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/rumble.h
@@ -0,0 +1,33 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+class RumbleProtocol final : private JoyconCommonProtocol {
+public:
+    explicit RumbleProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    DriverResult EnableRumble(bool is_enabled);
+
+    DriverResult SendVibration(const VibrationValue& vibration);
+
+private:
+    u16 EncodeHighFrequency(f32 frequency) const;
+    u8 EncodeLowFrequency(f32 frequency) const;
+    u8 EncodeHighAmplitude(f32 amplitude) const;
+    u16 EncodeLowAmplitude(f32 amplitude) const;
+};
+
+} // namespace InputCommon::Joycon